Datasheet

SSF4606
DESCRIPTION
The SSF4606 uses advanced trench
technology MOSFET to provide excellent
RDS(ON) and low gate charge. The
complementary MOSFET may be used
in power inverters, and other applications.
P-channel
N-channel
Schematic diagram
GENERAL FEATURES
●N-Channel
VDS = 30V,ID = 6.9A
RDS(ON) < 42mΩ @ VGS=4.5V
RDS(ON) < 28mΩ @ VGS=10V
●P-Channel
VDS = -30V,ID = -6A
RDS(ON) < 58mΩ @ VGS=-4.5V
RDS(ON) < 35mΩ @ VGS=-10V
Marking and pin Assignment
●High Power and current handing capability
●Lead free product is acquired
●Surface Mount Package
SOP-8
PACKAGE MARKING AND ORDERING INFORMATION
Device Marking
Device
Device Package
Reel Size
4606
SSF4606
SOP-8
Ø330mm
ABSOLUTE MAXIMUM RATINGS(TA=25℃unless otherwise noted)
Parameter
Symbol
top view
Tape width
Quantity
12mm
2500 units
N-Channel
P-Channel
Unit
Drain-Source Voltage
VDS
30
-30
V
Gate-Source Voltage
VGS
±20
±20
V
6.9
-6
6.0
-5.0
30
-30
2.0
2.0
1.44
1.44
-55 To 150
-55 To 150
N-Ch
62.5
P-Ch
62.5
Continuous Drain Current
TA=25℃
ID
TA=70℃
Pulsed Drain Current (Note 1)
Maximum Power Dissipation
IDM
TA=25℃
PD
TA=70℃
Operating Junction and Storage Temperature Range
TJ,TSTG
A
A
W
℃
THERMAL CHARACTERISTICS
Thermal Resistance,Junction-to-Ambient (Note2)
RθJA
ELECTRICAL CHARACTERISTICS (TA=25℃unless otherwise noted)
Parameter
Symbol
Condition
Min
Typ
℃/W
Max
Unit
OFF CHARACTERISTICS
©Silikron Semiconductor CO.,LTD.
1
http://www.silikron.com
v1.0
SSF4606
Drain-Source Breakdown Voltage
BVDSS
Zero Gate Voltage Drain Current
IDSS
Gate-Body Leakage Current
IGSS
VGS=0V ID=250μA
N-Ch
30
VGS=0V ID=-250μA
P-Ch
-30
VDS=24V,VGS=0V
N-Ch
1
VDS=-24V,VGS=0V
P-Ch
-1
N-Ch
±100
P-Ch
±100
VGS=±20V,VDS=0V
V
μA
nA
ON CHARACTERISTICS (Note 3)
Gate Threshold Voltage
Drain-Source On-State Resistance
Forward Transconductance
VGS(th)
RDS(ON)
gFS
VDS=VGS,ID=250μA
N-Ch
1
1.9
3
VDS=VGS,ID=-250μA
P-Ch
-1.2
-2
-2.4
VGS=10V, ID=6.9A
N-Ch
22.5
28
VGS=-10V, ID=-6.0A
P-Ch
28
35
VGS=4.5V, ID=5A
N-Ch
34.5
42
VGS=-4.5V, ID=-5A
P-Ch
44
58
VDS=5V,ID=6.9A
N-Ch
VDS=-5V,ID=-6A
P-Ch
13
N-Ch
680
P-Ch
900
N-Ch
100
P-Ch
200
N-Ch
77
P-Ch
120
N-Ch
4.6
P-Ch
7.7
N-Ch
4.1
P-Ch
5.7
N-Ch
20.6
P-Ch
20
N-Ch
5.2
P-Ch
9.5
N-Ch
7
P-Ch
9.6
N-Ch
1.8
P-Ch
2.5
N-Ch
3.2
P-Ch
4.5
10
V
mΩ
15.4
S
DYNAMIC PARAMETERS
Input Capacitance
Clss
Output Capacitance
Coss
Reverse Transfer Capacitance
N-Ch
VGS=0V, VDS=15V, f=1MHz
P-Ch
VGS=0V, VDS=-15V, f=1MHz
Crss
pF
SWITCHING CHARACTERISTICS (Note 4)
Turn-on Delay Time
td(on)
Turn-on Rise Time
tr
Turn-Off Delay Time
td(off)
Turn-Off Fall Time
tf
Total Gate Charge
Qg
Gate-Source Charge
Qgs
Gate-Drain Charge
©Silikron Semiconductor CO.,LTD.
Qgd
N-Ch
VDD=15V, RL=2.2Ω
VGEN=10V,RGEN=3Ω
P-Ch
VDD=-15V, RL=2.7Ω
VGEN=-10V,RGEN=3Ω
N-Ch
VDS=15V,ID=6.9A,
VGS=4.5V
P-Ch
VDS=-15V,ID=-6A,
VGS=-4.5V
2
http://www.silikron.com
nS
nS
nS
nS
nC
nC
nC
v1.0
SSF4606
DRAIN-SOURCE DIODE CHARACTERISTICS
Diode Forward Voltage (Note 3)
VSD
VGS=0V,IS=1A
N-Ch
0.76
1
V
VGS=0V,IS=-1A
P-Ch
-0.77
-1
V
NOTES:
1. Repetitive Rating: Pulse width limited by maximum junction temperature.
2. Surface Mounted on FR4 Board, t ≤ 10 sec.
3. Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2%.
4. Guaranteed by design, not subject to production testing.
r(t),Normalized Effective
Transient Thermal Impedance
N-Channel THERMAL CHARACTERISTICS
Square Wave Pluse Duration(sec)
Figure 1: Normalized Maximum Transient Thermal Impedance
r(t),Normalized Effective
Transient Thermal Impedance
P-Channel THERMAL CHARACTERISTICS
Square Wave Pluse Duration(sec)
Figure 2: Normalized Maximum Transient Thermal Impedance
©Silikron Semiconductor CO.,LTD.
3
http://www.silikron.com
v1.0
SSF4606
SOP-8 PACKAGE INFORMATION
Dimensions in Millimeters (UNIT:mm)
NOTES:
1. All dimensions are in millimeters.
2. Dimensions are inclusive of plating
3. Package body sizes exclude mold flash and gate burrs. Mold flash at the non-lead sides should be less than 6 mils.
4. Dimension L is measured in gauge plane.
5. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
©Silikron Semiconductor CO.,LTD.
4
http://www.silikron.com
v1.0
SSF4606
ATTENTION:
■
■
■
■
■
■
■
■
■
Any and all Silikron products described or contained herein do not have specifications that can handle applications that require
extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can
be reasonably expected to result in serious physical and/or material damage. Consult with your Silikron
representative nearest you before using any Silikron products described or contained herein in such applications.
Silikron assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in
products specifications of any and all Silikron products described or contained herein.
Specifications of any and all Silikron products described or contained herein stipulate the performance, characteristics, and
functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and
functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that
cannot be evaluated in an independent device, the customer should always evaluate and test devices
mounted in the customer’s products or equipment.
Silikron Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all semiconductor
products fail with some probability. It is possible that these probabilistic failures could give rise to
accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to
other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such
measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
In the event that any or all Silikron products(including technical data, services) described or contained herein are controlled under
any of applicable local export control laws and regulations, such products must not be exported without obtaining the export
license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of
Silikron Semiconductor CO.,LTD.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume
production. Silikron believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use
or any infringements of intellectual property rights or other rights of third parties.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the Silikron product
that you intend to use.
This catalog provides information as of Dec, 2008. Specifications and information herein are subject to change without notice.
©Silikron Semiconductor CO.,LTD.
5
http://www.silikron.com
v1.0