HE3 Datasheet

HE3
www.vishay.com
Vishay
Wet Tantalum Capacitors, High Energy,
Ultra High Capacitance, -55 °C to +125 °C Operation
FEATURES
• High energy, very high capacitance design
• All tantalum, hermetically sealed case
• Utilizes Vishay proven
SuperTan®
Available
technology
Available
• Terminations: radial leaded
• Approved to DSCC drawing 10011
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
APPLICATIONS
• Industrial
• Avionics/military/space
PERFORMANCE CHARACTERISTICS
DC Leakage Current (DCL Max.): 
at +25 °C: leakage current shall not exceed the values listed
in the Standard Ratings tables.
Operating Temperature:
-55 °C to +85 °C (to +125 °C with voltage derating)
Capacitance Tolerance:
at 120 Hz, +25 °C ± 20 % standard
± 10 % available as special
Life Test:
capacitors are capable of withstanding a 2000 h life test at
a temperature of +85 °C at the applicable rated DC working
voltage.
Contact marketing for availability of 10 % tolerance
ORDERING INFORMATION
HE3
C
543
K
025
B
Z
S
S
TYPE
CASE
CODE
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING AT +85 °C
TERMINATION
AND PACKAGING
RELIABILITY
LEVEL
TEMPERATURE
ESR
See
Ratings
and Case
Codes
table
This is
expressed in
microfarads.
The first two
digits are
the significant
figures. The
third is the
number of
zeros to follow.
K = 10 % (1)
M = 20 %
This is expressed
in V. To complete
the three-digit
block, zeros
precede the
voltage rating.
A decimal point
is indicated by
an “R”
(6R3 = 6.3 V)
A = 100 % tin
(RoHS compliant)
B = tin/lead
and bulk
Z = non-ER
S = standard
(-55 °C to
+85 °C)
S=
standard
Note
(1) Contact marketing for availability of 10 % tolerance
Revision: 13-May-14
Document Number: 42089
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HE3
www.vishay.com
Vishay
DIMENSIONS in inches [millimeters]
0.0253 ± 0.002 [0.64 ± 0.05] Dia.
(No. 22 AWG) Tinned Nickel leads
solderable and weldable
D
Negative lead
(attached to case)
L2
T
Positive lead
L1
0.156 MAX..
H
CASE CODE
D
HEIGHT
L2
(MIN.)
L1
(MIN.)
T
1.400 ± 0.005
[35.56 ± 0.127]
1.400 ± 0.005
[35.56 ± 0.127]
1.400 ± 0.005
[35.56 ± 0.127]
0.350 ± 0.015
[8.89 ± 0.381]
0.488 ± 0.015
[12.395 ± 0.381]
0.615 ± 0.015
[15.6 ± 0.4]
0.500
[12.70]
0.500
[12.70]
0.500
[12.70]
0.500
[12.70]
0.500
[12.70]
0.500
[12.70]
0.40 ± 0.015
[10.2 ± 0.38]
0.40 ± 0.015
[10.2 ± 0.38]
0.40 ± 0.015
[10.2 ± 0.38]
TYPE HE3
A
B
C
WEIGHT
(g)
(TYPICAL)
48.0
73.0
95.0
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE
18 000
24 000
36 000
48 000
54 000
72 000
A
A
B
B
C
C
8000
16 000
24 000
A
B
C
4000
8000
12 000
A
B
C
3000
6000
9000
A
B
C
1900
3800
5700
A
B
C
1100
2200
3300
A
B
C
PART NUMBER
25 VDC AT +85 °C; 15 VDC AT +125 °C
HE3A183(1)025(2)(3)(4)(5)
HE3A243(1)025(2)(3)(4)(5)
HE3B363(1)025(2)(3)(4)(5)
HE3B483(1)025(2)(3)(4)(5)
HE3C543(1)025(2)(3)(4)(5)
HE3C723(1)025(2)(3)(4)(5)
50 VDC AT +85 °C; 30 VDC AT +125 °C
HE3A802(1)050(2)(3)(4)(5)
HE3B163(1)050(2)(3)(4)(5)
HE3C243(1)050(2)(3)(4)(5)
63 VDC AT +85 °C; 40 VDC AT +125 °C
HE3A402(1)063(2)(3)(4)(5)
HE3B802(1)063(2)(3)(4)(5)
HE3C123(1)063(2)(3)(4)(5)
80 VDC AT +85 °C; 50 VDC AT +125 °C
HE3A302(1)080(2)(3)(4)(5)
HE3B602(1)080(2)(3)(4)(5)
HE3C902(1)080(2)(3)(4)(5)
100 VDC AT +85 °C; 65 VDC AT +125 °C
HE3A192(1)100(2)(3)(4)(5)
HE3B382(1)100(2)(3)(4)(5)
HE3C572(1)100(2)(3)(4)(5)
125 VDC AT +85 °C; 85 VDC AT +125 °C
HE3A112(1)125(2)(3)(4)(5)
HE3B222(1)125(2)(3)(4)(5)
HE3C332(1)125(2)(3)(4)(5)
MAX. ESR
AT +25 °C, 1 kHz
()
MAX. DCL
AT +25 °C
(μA)
0.060
0.060
0.045
0.045
0.035
0.035
150
150
200
200
300
350
0.075
0.045
0.035
170
270
400
0.100
0.055
0.035
170
270
400
0.100
0.065
0.040
300
400
500
0.085
0.065
0.050
300
400
500
0.100
0.085
0.075
300
400
500
Note
• Part number definitions:
(1) Standard capacitance tolerance is 20 % or “M“. Contact marketing for availability of 10 % or “K“.
(2) Standard termination is “B“ or tin/lead. RoHS compliant or 100 % tin is available as “A“.
(3) Standard reliability is “Z“ or non-established reliability.
(4) Standard temperature range is “S“ or -55 °C to +125 °C.
(5) Standard ESR is “S“.
Revision: 13-May-14
Document Number: 42089
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HE3
www.vishay.com
Vishay
PERFORMANCE CHARACTERISTICS OF HIGH ENERGY CAPACITORS
ELECTRICAL PERFORMANCE CHARACTERISTICS
ITEM
PERFORMANCE CHARACTERISTICS
Operating temperature range
-55 °C to +85 °C (to +125 °C with voltage derating)
Storage temperature range
-62 °C to +130 °C
Capacitor tolerance
± 20 % ± 10 % at 120 Hz
ESR
Limits per Standard Ratings table
DC leakage current (DCL max.)
At 25 °C the leakage current shall not exceed values listed in the Standard Rating table.
Reverse voltage
No continuous reverse voltage permitted
Surge voltage
The test shall be at 1000 cycles at 110 % of rated voltage at 85 °C. A cycle consists of a 30 s
charge and a 330 s discharge through 100  resistor.
Life test
2000 h at +85 °C
ENVIRONMENTAL CHARACTERISTICS
ITEM
TEST AND CONDITIONS
COMMENTS
Hermeticity
MIL-STD-202, method 112 C/IIIa
The capacitor shall be hermetically sealed such that the case does not leak
electrolyte or vent any gas when exposed to a vacuum.
Moisture resistance
MIL-STD-202, method 106
6 V polarity
Altitude
MIL-STD-202, method 105 C,
test condition D
100 000 feet test
MECHANICAL PERFORMANCE CHARACTERISTICS
ITEM
TEST AND CONDITIONS
COMMENTS
Thermal shock
MIL-STD-202, method 107 G
Test condition A
Shock
MIL-STD-202, method 213 B
test condition G
11 ms, 50 g
Vibration - high frequency
MIL-STD-202, method 204 D
test condition D
12 sweeps/axis, 20 g peak
Vibration - random
MIL-STD-202, method 214 A
test condition I, letter D
1.5 h/axis, 12 g
Resistance to solder heat
MIL-STD-202, method 210 F
The capacitor must withstand solder dipping of the terminals at 260 °C
for 10 s. The capacitor must not be visibly damaged and the electrical
characteristics must not be affected.
Solderability
MIL-STD-202, method 208
Terminal strength
MIL-STD-202, method 211 A
The capacitor terminals must withstand a 5 pound pull test for 5 s to 10 s.
The capacitor must not be visibly damaged and the electrical
characteristics must not be affected.
Part markings
MIL-STD-202, method 215 J
The capacitor shall be permanently and legibly marked on the
circumference of the case. The markings shall be resistant to solvents.
Weight (mass)
Revision: 13-May-14
See dimensions table
Document Number: 42089
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HE3
www.vishay.com
Vishay
HE3 MOUNTING OPTIONS
The HE3 capacitor can be mounted with many commercially available methods. Vishay offers the optional mounting hardware
outlined below.
THROUGH-HOLE
If mounted through-hole, the glass-to-metal seal must be protected from potential mounting and application stress. The HE3
can be mounted termination down through the HE3SPC001 spacer into the PCB. The proper size bracket HE3BKT00* can then
be utilized to hold the HE3 rigidly to the PCB.
TERMINATIONS UP
If mounted with terminations facing up for attachment to wiring, the spacer is not needed. The HE3 can be reverse with
terminations facing upward through the center of the HE3BKT00* bracket, which is then mounted through the PCB.
HE3 Nickel hold down cup
MS-HE-04-003
HE Hold down stud
MS-C-17-315-1
A
0.789
1.579
Notes
• Spot weld, 2 places
• Mounting bolt:
1. Material - Stainless steel
2. Thread - 6-32 NC-2A
PART NUMBER (1)
STUD
A ± 0.010
HE3BKT001
HE3A
0.391
HE3BKT002
HE3B
0.518
HE3BKT003
HE3C
0.605
HE3BKT004
HE3A W/spacer
0.572
HE3BKT005
HE3B W/spacer
0.699
HE3BKT006
HE3C W/spacer
0.831
Note
(1) The part numbers shown are for ordering the mounting bracket and/or spacer. The HE3 capacitor must be ordered separately using the
correct part number as outlined in ORDERING INFORMATION and in the STANDARD RATINGS table.
Revision: 13-May-14
Document Number: 42089
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HE3
www.vishay.com
Vishay
1.150 Dia.
0.015
1.326 ± 0.002 Dia.
0.195
Note
Mat. L: Aluminum
1.400 Dia.
PART NUMBER (1)
HE3SPC001
Note
(1) The part numbers shown are for ordering the mounting bracket and/or spacer. The HE3 capacitor must be ordered separately using the
correct part number as outlined in ORDERING INFORMATION and in the STANDARD RATINGS table.
HE3 PC BOARD MOUNTED
Bracket
Bracket
HE3
HE3
Revision: 13-May-14
Spacer
Document Number: 42089
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000