Technical Information No. DO 4404 Edition: 10/08 - High Power Metal Halide Lamp HMI® 6000 W/SE XS subject to change Supersedes: 08/04 Status: valid Product description The OSRAM HMI® 6000 W/SE is a very powerful single-ended metal halide lamp with outer jacket. This light source offers an enormous luminous flux for a long average service life. Featuring the OSRAM -XS- eXtreme Seal technology, the HMI® 6000 W/SE can stand more heat – up to 450°C. This lamp is mainly used for stage, studio, film and TV, especially for outdoor film shooting. Technical data HMI® 6000 W/SE Order reference Rated lamp wattage W 6000 Rated lamp voltage V 124 ± 11 Rated lamp current (~) A 55 Ignition voltage (cold/hot, MHz-ign.) kVS 10 / 40, max. 60 Luminous flux lm 600.000 Color temperature K 6.000 Color rendering index CRI l 1 a > 90 Electrode gap e mm 23 Lamp length (overall) l1 mm 360 Bulb diameter d mm 75 LCL a mm 210 Average service life h 500 Base GX 38 Lamp operation Maximum base seal temperature allowed °C 450 / with eXtreme Seal Technology (measured on Moly-foil/welding) Cooling Convection Burning position S 135 (vertical ± 135°); in horizontal position current bar up The HMI® 12000 W/SE can either be operated on standard ballast or on electronic power supplies (ECG). Manufacturers of igniters and control gear (not all officially approved by OSRAM) Ignitors: Walter Bauch 907 and 916, DESISTI 2642 Ballasts/Chokes: ARRI 6kW CB; Power Gems EB 640P ECGs: ARRI 6000 EB, 6/12kW EB; B&S EVG 6000C, Walter Bauch 907, DESISTI 2445 Further information on operating and control gears requirements is available with the OSRAM brochure "Guidelines for Control Gear and Igniters - Metal Halide Lamps Photo-Optic”, order reference 123T01E. Display/Optic Berlin