wind tunnel Controller CLWTC-1000TM Automatic Controller for the CLWT-067 Closed Loop, Benchtop Wind Tunnel Features: TM » D ata Center View data and monitor events at the data center Custom built for the CLWT-067TM closed loop wind tunnel, the CLWTC-1000TM is designed to automatically control the air flow and temperature through the test chamber. The controller is operated with a Windows PC (not included) to manage and measure air speed and air temperature, and to obtain continuous data on the devices under test. » Temperature Control Precisely controls wind tunnel temperatures up to 85°C » V elocity Control Controls the blower RPM and allows changes in air flow rates The CLWTC-1000TM controller features easy to use StageControl 1000 TM software, a version of the proven software used with other ATS wind tunnel controllers. The controller provides the PC with a functioning Data Center for viewing information and monitoring events. The user can set a range of velocities at different temperatures from the software to run the wind tunnel automatically. The CLWTC-1000TM also has manual controls to raise and lower the air temperature, in addition to changing temperature via the PC. It is highly recommended that users of the CLWT-067TM utilize the CLWTC-1000TM Closed Loop Wind Tunnel Controller as it automates the control of temperature and velocity automatic and minimizes the chances for errors using multiple and/or less capable controlling devices. The CLWTC-1000’s interface is compatible with any Windows PC. Overall dimensions (L x W x H) 34.3 cm x 25.4 cm x 17.8 cm (13.5” x 10” x 7”) Materials Sheet metal Weight 4.5 kg (10 lbs.) POWER 220VAC Applications: » H igh Temperature Testing Users can evaluate the effects of elevated temperatures on component and PCB response and reliability » H eat Sink Characterization Characterize a variety of heat sink sizes for low speed and forced convection cooling » S ensor Calibration Precision temperature and velocity controls allow accurate calibration of sensors » C omponent Testing An ideal test vehicle for individual or multiple component testing »M ultiple PCB Testing Test actual or simulated PCBs for thermal and flow distribution StageControl 1000 Software For further technical information, please contact Advanced Thermal Solutions, Inc. at 1-781-769-2800 or www.qats.com 89-27 ACCESS road, nORWOOD, ma 02062 USA | t: 781.769. 2800 f: 781.769.9979 | WWW.QATS.COM R2_031816