A t O ID1 O ID2 sectional drawing A-A A Order Code Temperature Resistance: -55°C up to +135°C Shrink Temperature: min. 90°C Specifications: UL 224, 125°C; CSA 22.2 Rate of shrinking: 3:1 Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany com. +49 79 42 945 - 0 ØID1 m in. (m m ) 1,5 3,0 6,0 9,0 12,0 18,0 24,0 39,0 71201615 71203215 71206415 71209515 71212715 71219115 71225415 71239015 CREATED DaF ØID2 internal (m m ) CHECKED SKl 0,5 1,0 2,0 3,0 4,0 6,0 8,0 13,0 t m ax. after shrinking (m m ) 0,45 0,55 0,65 0,75 0,75 0,85 1,00 1,15 GENERAL TOLERANCE DIN ISO 2768-1m Packaging Unit (m /Reel) 150 150 75 75 50 30 30 30 PROJECTION METHOD SCALE 3:1 MATERIAL DESCRIPTION Polyolefin, black AsHST Heat Shrinking Tubes ORDER CODE 712 xxx 15 www.we-online.de [email protected] SIZE Type X385 WEIGHT xxx STATUS DATE Released 2015-08-17 BUSINESS UNIT eiCan PAGE 1 /1 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.