F1772-4200 Vishay Roederstein AC-Capacitors, Suppression Capacitors Class X2 AC 440 V (MKT) FEATURES • Compliant to RoHS directive 2002/95/EC Dimensions in mm CAPACITANCE TOLERANCE W L Pb-free Standard: ± 20 % DISSIPATION FACTOR TAN H < 1 % measured at 1 kHz e3 δ RoHS COMPLIANT INSULATION RESISTANCE ± 0.4 PCM ± 0.4 X FOR C ≤ 0.33 µF 30 GΩ average value 15 GΩ minimum value TIME CONSTANT Ø 0.8 LEAD LENGTH X (mm) 4-1 6-1 15-1 30+5 ORDERING CODE** FOR C > 0.33 µF 10 000 s average value 5000 s minimum value TEST VOLTAGE F1772-. . .-4204/4264 F1772-. . .-4200/4260 F1772-. . .-4215/4265 F1772-. . .-4230/4263 Electrode Free margin Dielectric Center margin (Electrode/electrode): DC 2150 V/2 s REFERENCE STANDARDS EN 132 400, 1994 EN 60068-1 IEC 60384-14/2, 1993 UL 1283 UL 1414 CSA 22.2 No. 8-M 86 CSA 22.2 No. 1-M 90 DIELECTRIC Polyester film MAXIMUM PULSE RISE TIME: (dU/dt) in V/µs PITCH (mm) RATED VOLTAGE 15.0 22.5 27.5 37.5 AC 440 V 200 150 100 100 ELECTRODES Metal evaporated CONSTRUCTION Metallized film capacitor Internal series connection Between interconnected terminations and case (foil method): AC 2500 V for 2 s at 25 °C. RATED VOLTAGE AC 440 V, 50 Hz/60 Hz Z (Ω) PERMISSIBLE DC VOLTAGE DC 1000 V 101 CAPACITANCE RANGE E6 series 0.01 µF X2 to 1.0 µF X2 E12 values on request FURTHER TECHNICAL DATA See page 21 (Document No. 26504) Document Number: 26500 Revision: 16-Jun-10 10-3 0.01 0.05 0.1 0.5 1.0 0.015 µF 0.01 µF 0.047 µF 0.068 µF 0.033 µF 0.22 µF 0.47 µF 10-2 40/100/56 0.15 µF CLIMATIC TESTING CLASS ACC.TO EN 60068-1 10-1 0.33 µF Plastic case, epoxy resin sealed, flame retardant UL 94 V-0 2.2 µF 1.5 µF 1 µF 0.68 µF COATING 0.1 µF Radial tinned wire 0.022 µF 100 TERMINALS 5.0 10 f 50 100 (MHz) Impedance (Z) as a function of frequency (f) at Ta = 20 °C (average). Measurement with lead length 6 mm. For technical questions, contact: [email protected] www.vishay.com 25 F1772-4200 Vishay Roederstein AC-Capacitors, Suppression Capacitors Class X2 AC 440 V (MKT) APPROVALS COUNTRY SPECIFICATION ELECTRICAL VALUES APPROVAL REFERENCE U.S.A. (for AC 250 V) UL 1283 UL 1414 0.01 to 1.0 µF X 0.01 to 1.0 µF X E 76297 E 100682 Canada (for AC 250 V) C 22.2 No. 8-M 1986 C 22.2 No. 1-M 1994 0.01 to 1.0 µF X 0.01 to 0.82 µF X LR 64546 LR 64546-8 0.01 to 1.0 µF X2 DE 1-8221 0.01 to 1.0 µF X2 40005095 CB TEST-CERTIFICATE (for AC 440 V) EN 132 400; 1999 IEC 60384-14, 2nd edition, 1995 Germany APPROVAL MARK 10 This approval mark together with the CB-Certificate replace all national approval marks of the following countries (they have already signed the CB-Agreement): Austria Belgium Denmark Finland Sweden France Germany Ireland Italy Switzerland Netherlands Japan Singapore CAPACITANCE TOL. (%) Israel Portugal Spain Great Britain Norway China Poland Czech. Republic Rep. of Korea Hungary Iceland Slovenia PITCH (mm) BOX NO. DIMENSIONS W x H x L (mm) (+ 0.2/- 0.4 mm) WEIGHT LEAD LENGTH 6-1 mm (g) QUANTITY PACKAGE LEAD LENGTH ≤ 6-1 mm (pcs) (1) ORDERING CODE (2) F1772-310-42 . . 0.01 µF X2 ± 20 15.0 05 5.3 x 10.3 x 17.8 1.4 750 0.015 µF X2 ± 20 15.0 49 6.0 x 12.0 x 17.9 2.0 600 F1772-315-42 . . 0.022 µF X2 ± 20 15.0 07 7.3 x 13.3 x 17.8 2.0 450 F1772-322-42 . . 0.033 µF X2 ± 20 15.0 08 8.3 x 14.3 x 17.8 2.7 325 F1772-333-42 . . 0.047 µF X2 ± 20 22.5 09 6.3 x 14.3 x 26.3 3.3 260 F1772-347-42 . . 0.047 µF X2 ± 20 15.0 28 8.3 x 17.3 x 17.8 3.5 300 F1772-347-426 . 0.068 µF X2 ± 20 22.5 11 7.3 x 15.3 x 26.3 4.1 235 F1772-368-42 . . 0.068 µF X2 ± 20 15.0 35 10.3 x 17.3 x 17.8 4.3 225 F1772-368-426 . 0.1 µF X2 ± 20 22.5 12 8.3 x 16.3 x 26.3 4.6 200 F1772-410-42 . . 0.1 µF X2 ± 20 15.0 36 13.3 x 22.3 x 17.8 4.2 185 F1772-410-426 . 0.15 µF X2 ± 20 27.5 29 8.8 x 18.3 x 31.3 6.8 160 F1772-415-42 . . 0.15 µF X2 ± 20 22.5 13 10.3 x 18.3 x 26.3 6.7 170 F1772-415-426 . 0.22 µF X2 ± 20 27.5 14 11.0 x 21.0 x 31.0 9.1 125 F1772-422-42 . . 0.22 µF X2 ± 20 22.5 27 12.3 x 19.8 x 26.3 8.7 125 F1772-422-426 . 0.33 µF X2 ± 20 27.5 15 13.0 x 23.3 x 31.3 12.9 110 F1772-433-42 . . 0.33 µF X2 ± 20 22.5 38 15.3 x 26.3 x 26.3 14.3 110 F1772-433-426 . 0.47 µF X2 ± 20 37.5 44 12.0 x 22.3 x 41.3 15.2 90 F1772-447-42 . . 0.47 µF X2 ± 20 27.5 17 16.0 x 29.3 x 31.3 20.0 85 F1772-447-426 . 0.68 µF X2 ± 20 37.5 19 15.5 x 28.3 x 41.3 24.0 70 F1772-468-42 . . 0.68 µF X2 ± 20 27.5 40 17.8 x 32.8 x 31.3 24.4 80 F1772-468-426 . 1.0 µF X2 ± 20 37.5 20 17.8 x 32.3 x 41.3 31.6 60 F1772-510-42 . . 1.0 µF X2 ± 20 27.5 41 19.5 x 34.8 x 31.3 29.5 70 F1772-510-426 . Notes • (1) (2) Inbuilt discharging resistor on request (with larger case dimensions). Further information about packaging quantities with different lead length and/or taped versions. See page 16 (Document No. 27608 Packaging Quantities). Use Box No. as reference These capacitors can be delivered on continuous tape and reel - see page 14/15 (Document Number 27622). The ordering code is: F1772-. . .-4290 at H = 16.5 mm F1772-. . .-4291 at H = 18.5 mm F1772-. . .-4960 at H = 16.5 mm F1772-. . .-4961 at H = 18.5 mm www.vishay.com 26 For technical questions, contact: [email protected] Document Number: 26500 Revision: 16-Jun-10 F1772-4200 AC-Capacitors, Suppression Capacitors Class X2 AC 440 V (MKT) Vishay Roederstein APPLICATION NOTES • For X2 electromagnetic interference suppression in across the line applications (50 Hz/60 Hz) with a maximum mains voltage of 440 VAC. • These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse programs must be used. • These capacitors can be used for series impedance application in case safety approvals are requested. • The maximum ambient temperature must not exceed 100 °C. • Rated voltage pulse slope: If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 620 VDC and divided by the applied voltage. Document Number: 26500 Revision: 16-Jun-10 For technical questions, contact: [email protected] www.vishay.com 27 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000