MCR101-MCR104 SERIES SILICON CONTROLLED RECTIFIERS High-reliability discrete products and engineering services since 1977 FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS. Rating Symbol Value Unit Peak reverse blocking voltage MCR101 MCR102 MCR103 MCR104 VRRM Forward current RMS (all conduction angles) IT(RMS) 0.8 Amps ITSM 6.0 Amps 2 0.15 A2s Peak forward surge current (1/2 cycle, sine wave 60 Hz, TA = 25°C) Circuit fusing considerations (t = 1 to 8.3ms, TA = 25°C) 15 30 60 100 It Volts Forward peak gate power (TA = 25°C) PGM 0.1 Watts Forward average gate power (TA = 25°C) PG(AV) 0.01 Watts Forward peak gate current (TA = 25°C, 300µs, 120PPS) IGM 1.0 Amps Reverse peak gate voltage VGM 4.0 Volts Operating junction temperature range @ rated VRRM and VDRM TJ -65 to +85 °C Storage temperature range Tstg -65 to +150 °C - +230 °C Symbol Max Unit Lead solder temperature (<1/16” from case, 10 sec. max.) THERMAL CHARACTERISTICS Characteristic Thermal resistance, junction-to-case RθJC 75 °C/W Thermal resistance, junction-to-ambient RθJA 200 °C/W ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) Characteristic Symbol Min Max 15 30 60 100 - Unit (1) Peak forward blocking voltage (TC = 85°C) MCR101 MCR102 MCR103 MCR104 vDRM Peak forward blocking current (Rated VDRM @ TC = 85°C) IDRM - 100 Peak reverse blocking current (Rated VRRM @ TC = 85°C) IRRM - 100 µA Forward “on” voltage(2) (ITM = 1.0A peak @ TA = 25°C) VTM - 1.7 Volts Gate trigger current (continuous dc)(3) (VAK = 7Vdc, RL = 100Ω, TC = 25°C) IGT - 200 µA VGT 0.1 0.8 1.2 - - 5.0 10 Gate trigger voltage (continuous dc) (VAK = 7Vdc, RL = 100Ω) TC = 25°C TC = -65°C TC = 85°C Holding current (VAK = 7Vdc, initiating current = 20mA) TC = 25°C TC = -65°C VGD IH Volts µA Volts mA Rev. 20130128 High-reliability discrete products and engineering services since 1977 MCR101-MCR104 SERIES SILICON CONTROLLED RECTIFIERS Note 1: VDRM and VRRM for all types can be applied on a continuous dc basis without incurring damage. Ratings apply for zero or negative gate voltage but positive gate voltage shall not be applied concurrently with a negative potential on the anode. When checking forward or reverse blocking capability, thyristor devices should not be tested with a constant current source in a manner that the voltage applied exceeds the rated blocking voltage. Note 2: Forward current applied for 1.0 ms maximum duration, duty cycle ≤ 1.0%. Note 3: RGK current is not included in measurement. MECHANICAL CHARACTERISTICS Case: TO-92 Marking: Body painted, alpha-numeric Pin out: See below Rev. 20130128 High-reliability discrete products and engineering services since 1977 MCR101-MCR104 SERIES SILICON CONTROLLED RECTIFIERS Rev. 20130128