High-reliability discrete products and engineering services since 1977 MCR265 SERIES THYRISTORS FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS. RATING Peak Reverse Blocking Voltage (1) SYMBOL VALUE MCR265-4 MCR265-6 200 VRRM 400 MCR265-8 600 MCR265-10 800 Forward Current (TC=70°C) (All Conduction Angles) UNIT 50 MCR265-2 IT(RMS) IT(AV) Volts 55 35 Amps Peak Non-repetitive Surge Current – 8.3 ms (1/2 Cycle, Sine Wave) ITSM Forward Peak Gate Power PGM 20 Watts Forward Average Gate Power PG(AV) 0.5 Watt Amps 550 Forward Peak Gate Current (300μs, 120 PPS) lGM Operating Junction Temperature Range TJ -40 to +125 °C Storage Temperature Range Tstg -40 to +150 °C Amps 2.0 1. VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative voltage, however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. These devices are rated for use in applications subject to high surge conditions. Care must be taken to ensure proper heat sinking when the device is to be used at high sustained currents. THERMAL CHARACTERISTICS CHARACTERISTIC SYMBOL MAX UNIT Thermal Resistance, Junction to Case RθJC 0.9 °C/W Thermal Resistance, Junction to Ambient RθJA 60 °C/W ELECTRICAL CHARACTERISTICS CHARACTERISTIC Peak Forward Blocking Voltage (TJ = 125°C) MCR265-2 MCR265-4 MCR265-6 MCR265-8 MCR265-10 SYMBOL MIN TYP MAX UNIT - - Volts VDRM 50 200 400 600 800 - - 2.0 - - 2.0 - 1.5 1.9 Peak forward blocking current (rated VDRM @ TJ = 125°C) IDRM Peak reverse blocking current (rated VRRM @ TJ = 125°C) IRRM Forward “on” voltage(1) (ITM = 110A) VTM mA mA Volts Rev. 20130116 High-reliability discrete products and engineering services since 1977 MCR265 SERIES THYRISTORS Gate trigger current (continuous dc) (Anode voltage = 12Vdc, RL = 100ohms) (TC = -40°C) IGT Gate trigger voltage (continuous dc) (Anode voltage = 12Vdc, RL = 100ohms) VGT Gate non-trigger voltage (Anode voltage = rated VDRM, RL = 100ohms, TJ = 125°C) VGD - 20 40 50 90 - 1.0 1.5 0.2 - - mA Volts Volts MECHANICAL CHARACTERISTICS Case: TO-220AB Marking: Body painted, alpha-numeric Pin out: See below Rev. 20130116 High-reliability discrete products and engineering services since 1977 MCR265 SERIES THYRISTORS Rev. 20130116