Product Brief EiceDRIVER™ 1200V Gate Driver ICs for Solar Inverters and UPS Features Improving efficiency is the number one objective in the field of photovoltaics: Ways of converting solar energy into electricity more efficiently are required in order to optimize 1200V Coreless Transformer isolated Driver ICs Rail-to-rail outputs protection function the technology’s cost-effectiveness. Efficiency gains of as little as one percent can still yield enormous returns in this segment. Infineon EiceDRIVER™ with Coreless Transformer technology provides a comprehensive portfolio of high-performance Driver ICs for photovoltaic inverters. By combining Products EiceDRIVER™ with CoolMOS™, IGBTs, Silicon Carbide (SiC) power switches, IGBT modules Infineon enables customers to achieve their goal: 1EDI30J12CP 1EDI30J12CL 1ED020I12-F2 1ED020I12-B2 1ED020I12-FT 1ED020I12-BT 2ED020I12-F2 2ED020I12-FI The EiceDRIVER™ single channel product 1ED020I12-F2 with functional isolation and protection functions as desaturation detection, active Miller clamp, under voltage lockout and shut down. 1ED020I12-FT in addition with two-level-turn-off, 1ED020I12-B2 respective 1ED020I12-BT with basic isolation is able to operate at transient +/- 1420V and static voltages of +/-1200V according to EN60747-5-2, recognized under UL1577. 2ED020I12-F2 is combining two complete single channel driver ICs in one condensed package for space saving benefits. 2ED020I12-FI as half bridge driver with galvanic isolated high side. 1EDI30J12CL (150mil) and 1EDI30J12CP (300mil) as the new highlights in combination with Infineon’s Direct Drive SiC JFET boost the reliability and efficiency of inverters for photovoltaic applications. As the leader in high-efficiency technologies, we enable customers in realizing photovoltaic inverter efficiencies of more than 99%. www.infineon.com/eicedriver Applications Solar UPS Product Brief EiceDRIVER™ 1200V Gate Driver ICs for Solar Inverters and UPS Infineon Direct Drive Technology +5V to SGND VCC1 CVCC SiC JFET Drain cascode JFDrv SGND Controller GND1 MDrv IN VReg EN CLJFG CVReg LV MOSFET VCC2 CVEE2 VEE2 -25V to VCC2 1EDI30J12CL/CP BSEN Source cascode Typical usage of Single-Channel driver 1ED020I12-F2/-B2 +5V +15V VCC2 CVCC2 RDY /FLT DDESAT CDESAT RST +5V To control logic RDESAT DESAT GATE DProt VCC CVCC2 GND CLAMP ININ+ RG GND2 VEE2 1ED020I12-F2 Detailed product features Product Type Package Topology Voltage Class Type 1EDI30J12CL 1EDI30J12CP 1ED020I12-F2 1ED020I12-B2 1ED020I12-FT 1ED020I12-BT 2ED020I12-F2 2ED020I12-FI DSO-16 DSO-19 DSO-16 DSO-16 DSO-16 DSO-16 DSO-36 DSO-18 [V] DirectDrive DirectDrive Single Single Single Single Dual Half Bridge 1200 1200 1200 1200* 1200 1200* 1200 1200 Io+ / Io- [mA] 3000 / 3000 3000 / 3000 2000 / 2000 2000 / 2000 2000 / 2000 2000 / 2000 2000 / 2000 1000 / 2000 Turn On Tj(max) Propagation Delay (max) [ns] 80 80 195 195 2000 2000 195 105 [°C] 150 150 150 150 150 150 150 150 UVLO ON Fault Shutdown max Reporting /Enable [V] -17,2 -17,2 12,6 12,6 12,6 12,6 12,6 13,5 – – DESAT DESAT DESAT DESAT DESAT – EN EN /RST /RST /RST /RST /RST /SD * Power loss considerations to be done by customer based on power switch selection Published by Infineon Technologies Austria AG 9500 Villach, Austria © 2012 Infineon Technologies AG. All Rights Reserved. Visit us: www.infineon.com Order Number: B114-H9720-X-X-7600-DB2012-0009 Date: 05 / 2012 Attention pleAse! The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/ or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. informAtion For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). WArnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.