Datenblatt

HAMBURG INDUSTRIES CO.,LTD
EMV Compliant
TECHNICAL CHARACTERISTICS
1.General Characteristics
Dimensions: 62.60L x 30.00W x 6.80H mm
Weight: Approx. 6.7g
Contact principle: Friction technology
Operating position: Shaft up / Down / Horizontal
Mounting System: Thru-Hole with Snap-in-lock
Durability: 200,000 cycles min.
2. Mechanical Characteristics:
Insulation material: Thermoplastic, UL 94V-0
3.Electrical Characteristics
Number of contacts: 8 pins
Contact resistance: 50 mΩ typical, 100 mΩ max.
Insulation resistance: > 1000 MΩ / 500 VDC
Switch type: Blade
Operation: Normally Open
Unit: mm; Tolerances: ±0.10mm
Mechanical outline dimension
4. Solderability
Wave: 260°C, 5 sec.
Vapor phase: Not applicable
IR reflow: Not applicable
Manual soldering: 360°C, 3 sec. Max.
5. Environmental Characteristics
Operating temperature: - 40°C ~ + 85°C
Operating humidity: 10 % ~ 95 % RH
Storage temperature: - 40°C ~ + 85°C
Storage humidity: 10 % ~ 95 % RH
Thermal shock: - 40°C ~ + 85°C, 5 cycles
Damp Heat: 40°C, 90 % RH, 500HR.
Salt-mist: 35°C, 5%, NaCl , 48HR.
H&V Smart Card Acceptor
Model No.: ICA-605
Revision: 1.4
Date: DEC. 01, 2003
Unit: mm; Tolerances: ±0.10mm
Reference dimension for PCB layout
Similar pages