Datenblatt

HAMBURG INDUSTRIES CO., LTD.
Wolfgang Knap GmbH & Co. KG / Lilienberggasse 13 / 1130 Vienna / Austria
EMV & NDS & PCI Compliant
Reverse Type
TECHNICAL CHARACTERISTICS
1. General Characteristics
Dimensions: 61.10L x 40.00W x 5.90H mm
61.10L x 40.00W x 7.80H mm
61.10L x 40.00W x 8.90H mm
61.10L x 40.00W x 10.65H mm
61.10L x 40.00W x 11.45H mm
Standoff H= 0.00, 1.90, 3.00, 4.75, 5.55 mm
Weight: Approx. 8.5 g
Contact principle: Friction technology
Operating position: Shaft up / Down / Horizontal
Mounting System: Thru-Hole with snap-in lock
Durability: 100,000 cycles min.
2. Mechanical Characteristics
Insulation material: Thermoplastic, UL 94V-0
RoHS Directive 2002/95/EC Compliant
Unit: mm; Tolerances: 0.15 mm
Mechanical outline dimension
3. Electrical Characteristics
Number of contacts: 8 pins
Contact resistance: 50 m typical, 100 m max.
Insulation resistance: >1000 M / 500 VDC
Switch type: Blade
Operation: Normally Close
4. Solderability
Wave: 260C, 5 sec. Max.
IR reflow: Not applicable
Manual soldering: 360C, 3 sec. Max.
5. Environmental Characteristics
Operating temperature: - 40C ~ + 85C
Operating humidity: 10 % ~ 95 % RH
Storage temperature: - 40C ~ + 85C
Storage humidity: 10 % ~ 95 % RH
H&V Smart Card Acceptor
Unit: mm; Tolerances: 0.05 mm
Reference dimension for PCB layout
Model No.: ICA-611
Revision: 1.2
Date: OCT. 13, 2011
For further information,please contact:
Tel: +43 1 4030812 Fax: +43 1 4087213
E-mail: [email protected]
URL: http://www.knap.at
Similar pages