HAMBURG INDUSTRIES CO., LTD. EMV Compliant TECHNICAL CHARACTERISTICS 1. General Characteristics Dimension: 55.50L x 40.00W x 5.80H mm Weight: Approx. 12.6 g Contact principle: Landing technology Operating position: Shaft up / Down / Horizontal Mounting System: DIP or SMT Type Durability: 200,000 cycles min. 2. Mechanical Characteristics Insulation material: Thermoplastic, UL 94V-0 RoHS Directive 2002/95/EC Compliant 3. Electrical Characteristics Number of contacts: 8, 16 pins (optional) Contact resistance: 50 mΩ typical, 100 mΩ max. Insulation resistance: >1000 MΩ / 500 VDC Switch type: Sealed Operation: Normally Open Unit: mm; Tolerances: ±0.15 mm Mechanical outline dimension 4. Solderability Wave: 260°C, 5 sec. Max. IR reflow: Not applicable Manual soldering: 360°C, 3 sec. Max. 5. Environmental Characteristics Operating temperature: - 40°C ~ + 85°C Operating humidity: 10 % ~ 95 % RH Storage temperature: - 40°C ~ + 85°C Storage humidity: 10 % ~ 95 % RH H&V Smart Card Acceptor Unit: mm; Tolerances: ±0.05 mm Reference dimension for PCB layout Model No.: ICA-700 8Pin SMT Revision: 1.9 Date: OCT. 25, 2007 DOC-CAS-700104-009 For further information,please contact: Wolfgang Knap GmbH & Co. KG +43-1-4030812 E-mail: [email protected] URL: http://www.knap.at