FRD30000 Fully Screened, 6.5kV, 20A Reed Relay cynergycomponents The very high carry current capacity and high voltage isolation of this series is achieved through the use of multiple high vacuum reed switch contacts, ensuring a high level of performance and reliability. The two standard models will carry currents of 12 and 20Amps respectively at 30MHz and feature silver plated, fully screened coil assemblies for ultra-low RF losses. Typical applications include over the horizon (OTH) HF radar systems and 1kW base station transmitters. Up to 20A Carry Current at 30MHz 6.5kV DC isolation across contacts Fully Screened Coil for Low RF Loss Cost Effective alternative to Vacuum Ceramic Devices Unique Design Suitable for 1 kW HF Transmitters Available as Form A (SPNO) only. CONTACT Action (form A, B or Latching) Switching Voltage Switching Current Carry Current Isolation Capacitance (max.) Lifetime Contact Resistance Insulation Resistance UNITS CONDITIONS V A A kV pF operations mOhms Ohms DC max DC max RMS at 30MHz max DC max coil/screen gnd dry switching 24V, 1A maximum (typical) minimum (typical) VDC VDC VDC Ohms max min +/10% FRD32061 A 20 1 12 6 2 109 107-108 50 (10) 1010 (1013) FRD32062 A 20 1 20 6.5 2 109 107-108 50 (10) 1010 (1013) 24 16 4 430 Full Via Mtg Screws 24 16 4 270 Full Via Mtg Screws 5 3 5 3 COIL at 20’C Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Nominal Working Voltage Must Operate Must Release Nominal Resistance RF Screening RF Screening Connection RELAY Operate time (incl. bounce) Release time Isolation contact to all other terminals Isolation coil to screen Capacitance contact to all other terms ENVIRONMENTAL Storage temperature range Operating temperature range Weight ms ms kV kV DC max DC max 10 0.5 10 0.5 pF contacts open 6.0 6.0 typical -55°C to +125°C -40°C to +85°C 76 108 °C °C gm Please refer to this document for circuit design notes:http://www.cynergy3.com/blog/application-notes-reed-relays-0 Email:[email protected] ISO 9001 C E R T I F I E D www.cynergy3.com © 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. FRD30000 2016 FRD30000 Fully Screened, 6.5kV, 20A Reed Relay Mechanical Dimensions All dimensions are in millimeters (inches) cynergycomponents FRD32061 70.00 max (2.75") 25.00 max 2holes 5.0 (0.98") 3.60 dia. (0.14") 8.60 dia. 1.0 dia. (0.35") (0.039") 42.00 max34.5 15.24 (1.65")(1.36") (0.60") 6.00 (0.23") 35.00 max (1.38") 19.00 ma x (0.74" ) 12.00 (0.47") 6.0max (0.23") 68.00 max. (2.67") 51.00 max. (2.00") 7.0 4.50 25.00 max (0.18") (0.98") 57.0 max (2.24") FRD32062 (0.27") 2holes 3.60 dia. (0.14") 51.00 max.42.0015.24 (2.00") (1.65") (0.60") 2holes 4.80 dia. (0.188") 1.0 dia. (0.039") 25.00 max (0.98") 7.50 max. (0.29") 25.00 max (0.98") 12.00 (0.47") Please refer to this document for circuit design notes:http://www.cynergy3.com/blog/application-notes-reed-relays-0 ISO9001 Certifed USA Sales & Tech Support(866) 258-5057 Email: [email protected] Cynergy3 Components 2320 Paseo de las Americas, Suite 104 San Diego, CA 92154 EUROPE - UK - ROW Telephone +44 (0) 1202 897969 Fax +44 (0) 1202 891918 Email:[email protected] Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE © 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Corp. *Other names and brands may be claimed as the property of others.