AOS Semiconductor Product Reliability Report AON7462, rev B Plastic Encapsulated Device ALPHA & OMEGA Semiconductor, Inc www.aosmd.com 1 This AOS product reliability report summarizes the qualification result for AON7462. Accelerated environmental tests are performed on a specific sample size, and then followed by electrical test at end point. Review of final electrical test result confirms that AON7462 passes AOS quality and reliability requirements. The released product will be categorized by the process family and be routine monitored for continuously improving the product quality. Table of Contents: I. II. III. IV. Product Description Package and Die information Reliability Stress Test Summary and Results Reliability Evaluation I. Product Description: The AON7462 is fabricated using an advanced high voltage MOSFET process that is designed to deliver high levels of performance and robustness in popular AC-DC applications. By providing low RDS(on), Ciss and Crss along with guaranteed avalanche capability this device can be adopted quickly into new and existing offline power supply designs. This device is ideal for boost converters and synchronous rectifiers for consumer, telecom, industrial power supplies and LED backlighting. Details refer to the datasheet. II. Die / Package Information: Process Package Type Lead Frame Die Attach Bond Mold Material Moisture Level AON7462 Standard sub-micron 300V N-Channel MOSFET DFN 3x3A EP Bare Cu Ag Epoxy Au wire Epoxy resin with silica filler Up to Level 1 2 III. Reliability Stress Test Summary and Results Test Item Test Condition Time Point Total Sample Size* Number of Failures Reference Standard MSL Precondition 168hr 85°C / 85%RH + 3 cycle reflow@260°C (MSL 1) - 4158 pcs 0 JESD22-A113 HTGB Temp = 150°C , Vgs=100% of Vgsmax 168 / 500 / 1000 hours 847 pcs HTRB Temp = 150°C , Vds=80% of Vdsmax 168 / 500 / 1000 hours 847 pcs HAST 130°C , 85%RH, 33.3 psi, Vds = 80% of Vdsmax 96 hours 924 pcs 0 JESD22-A110 H3TRB 85°C , 85%RH, Vds = 80% of Vdsmax 1000 hours 462 pcs 0 JESD22-A101 Autoclave 121°C , 29.7psi, RH=100% 96 hours 924 pcs 0 JESD22-A102 Temperature Cycle -65°C to 150°C , air to air, 250 / 500 / 1000 cycles 924 pcs 0 JESD22-A104 0 JESD22-A108 0 JESD22-A108 Power 15000 924 pcs 0 AEC Q101 Tj = 100°C cycles Cycling *Note: The reliability data presents total of available generic data up to the published date. IV. Reliability Evaluation FIT rate (per billion): 3.52 MTTF = 32433 years The presentation of FIT rate for the individual product reliability is restricted by the actual burn-in sample size. Failure Rate Determination is based on JEDEC Standard JESD 85. FIT means one failure per billion hours. 2 9 Failure Rate = Chi x 10 / [2 (N) (H) (Af)] = 3.52 9 MTTF = 10 / FIT = 32433 years Chi²= Chi Squared Distribution, determined by the number of failures and confidence interval N = Total Number of units from burn-in tests H = Duration of burn-in testing Af = Acceleration Factor from Test to Use Conditions (Ea = 0.7eV and Tuse = 55°C) Acceleration Factor [Af] = Exp [Ea / k (1/Tj u – 1/Tj s)] Acceleration Factor ratio list: 55 deg C 70 deg C 85 deg C 100 deg C 115 deg C Af 259 87 32 13 5.64 Tj s = Stressed junction temperature in degree (Kelvin), K = C+273.16 Tj u =The use junction temperature in degree (Kelvin), K = C+273.16 k = Boltzmann’s constant, 8.617164 X 10-5eV / K 130 deg C 150 deg C 2.59 1 3