136D Datasheet

136D
www.vishay.com
Vishay
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum
Hermetic Seal for -55 °C to +125 °C Operation, Low ESR
FEATURES
• Military specification MIL-PRF-39006/30 and
39006/31. model 136D capacitors are
commercial equivalents of military style
CLR90 and CLR91
Available
Available
• Capacitors to meet the MIL-specs must be
ordered by M39006 part numbers shown in
the relative specification
• Axial through-hole terminations: standard tin /
lead (SnPb), 100 % tin (RoHS-compliant) available
Available
• Standard and extended ratings
• Low ESR
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +85 °C
(to +125 °C with voltage derating)
Following life test:
Capacitance Tolerance: at 120 Hz, +25 °C. ± 20 %
standard. ± 10 %, ± 5 % available as special.
DC Leakage Current (DCL Max.): at +25 °C and above:
leakage current shall not exceed the values listed in the
Standard Ratings Tables.
1. DCL, measured at +85 °C rated voltage, shall not be in
excess of the original requirement.
2. The equivalent series resistance shall not exceed 150 %
of the initial requirement.
3. Change in capacitance shall not exceed 10 % from the
initial measurement.
Life Test: capacitors are capable of withstanding a 2000 h
life test at a temperature of +85 °C or +125 °C at the
applicable rated DC working voltage.
ORDERING INFORMATION
136D
306
X0
006
C
2
E3
MODEL
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT +85 °C
CASE CODE
STYLE NUMBER
RoHSCOMPLIANT
This is expressed
in picofarads. The
first two digits
are the significant
figures. The third
is the number of
zeros to follow
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
This is expressed in
volts. To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point
is indicated by an “R”
(6R3 = 6.3 V)
See Ratings
and Case
Codes table
Std. temperature
(max. +125 °C)
0 = no insulating
sleeve
2 = polyester
insulation sleeve
3 = high temperature
film insulation
E3 = 100 % tin
termination
(RoHS-compliant
design)
Blank = SnPb
termination
(standard
design)
Note
• Packaging: the use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the
unit weight.
Revision: 05-Dec-14
Document Number: 40132
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
136D
www.vishay.com
Vishay
DIMENSIONS in inches [millimeters]
E
L1
0.0253 ± 0.002 [0.64 ± 0.05] Dia.
(NO. 22 AWG tinned nickel leads
solderable and weldable)
CASE
CODE
DCLR 90 / 91
EQUIV.
C
T1
F
T2
T
T3
K
T4
D
E
Weld
Tantalum
L2
D
L1
L2
(Max.)
E
0.188 ± 0.016
[4.78 ± 0.41]
0.281 ± 0.016
[7.14 ± 0.41]
0.375 ± 0.016
[9.53 ± 0.41]
0.375 ± 0.016
[9.53 ± 0.41]
0.453 + 0.031 / - 0.016
[11.51 + 0.79 / - 0.41]
0.641 + 0.031 / - 0.016
[16.28 + 0.79 / - 0.41]
0.766 + 0.031 / - 0.016
[19.46 + 0.79 / - 0.41]
1.062 + 0.031 / - 0.016
[26.97 + 0.79 / - 0.41]
0.734
[18.64]
0.922
[23.42]
1.047
[26.59]
1.343
[34.11]
1.500 ± 0.250
[38.10 ± 6.35]
2.250 ± 0.250
[57.15 ± 6.35]
2.250 ± 0.250
[57.15 ± 6.35]
2.250 ± 0.250
[57.15 ± 6.35]
WEIGHT
(g)
(Max.)
2.6
6.2
11.6
17.7
Note
• For insulated parts, add 0.015" [0.38] to the diameter. The insulation shall lap over the ends of the capacitor body.
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
PART NUMBER (1)
CODE
MAX. ESR MAX. IMP.
AT +25 °C AT -55 °C
120 Hz
120 Hz
()
()
MAX. DCL (μA)
AT
+25 °C
+85 °C
+125 °C
MAX. CAPACITANCE CHANGE
(%) AT
MAX.
RIPPLE
40 kHz
IRMS
(mA)
-55 °C
+85 °C
+125 °C
2
2
3
6.5
7.9
13
14
-40
-40
-40
-44
-44
-64
-80
+10.5
+14
+14
+17.5
+14
+17.5
+25
+12
+16
+16
+20
+16
+20
+25
820
960
1200
1375
1800
1900
2265
2
2
2
7
6
14
16
-40
-40
-44
-44
-64
-64
-80
+10.5
+14
+17.5
+17.5
+17.5
+17.5
+25
+12
+16
+20
+20
+20
+20
+25
820
900
1230
1370
1770
1825
2330
-32
-36
-36
-36
-40
-64
-80
+10.5
+14
+14
+14
+14
+17.5
+25
+12
+16
+16
+16
+16
+20
+25
820
855
1200
1365
1720
1800
2360
6 VDC AT +85 °C; 4 VDC AT +125 °C
30
68
140
270
330
560
1200
C
C
F
F
T
T
K
136D306X0006C2
136D686X0006C2
136D147X0006F2
136D277X0006F2
136D337X0006T2
136D567X0006T2
136D128X0006K2
25
56
120
220
290
430
850
C
C
F
F
T
T
K
136D256X0008C2
136D566X0008C2
136D127X0008F2
136D227X0008F2
136D297X0008T2
136D437X0008T2
136D857X0008K2
20
47
100
180
250
390
750
C
C
F
F
T
T
K
136D206X0010C2
136D476X0010C2
136D107X0010F2
136D187X0010F2
136D257X0010T2
136D397X0010T2
136D757X0010K2
1.99
1.58
0.99
1.11
0.73
0.65
0.50
100
60
40
25
20
25
20
1
1
1
1
2
2
3
8 VDC AT +85 °C; 5 VDC AT +125 °C
1.99
1.66
1.11
1.12
0.78
0.71
0.47
100
59
50
30
25
25
22
1
1
1
1
2
2
4
10 VDC AT +85 °C; 7 VDC AT +125 °C
1.99
1.84
0.99
1.11
0.80
0.75
0.44
175
100
60
40
30
25
23
1
1
1
1
2
2
4
2
2
4
7
10
16
16
Note
(1) Part numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer
polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve,
change the last digit in the part number from “2” to “3”. For RoHS compliant add “E3”.
Revision: 05-Dec-14
Document Number: 40132
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
136D
www.vishay.com
Vishay
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
PART NUMBER (1)
CODE
MAX. ESR MAX. IMP.
AT +25 °C AT -55 °C
120 Hz
120 Hz
()
()
MAX. DCL (μA)
AT
+25 °C
+85 °C
+125 °C
MAX. CAPACITANCE CHANGE
(%) AT
-55 °C
+85 °C
+125 °C
MAX.
RIPPLE
40 kHz
IRMS
(mA)
15 VDC AT +85 °C; 10 VDC AT +125 °C
15
C
136D156X0015C2
1.99
155
1
2
-24
+10.5
+12
780
33
C
136D336X0015C2
1.66
90
1
2
-28
+14
+16
820
70
F
136D706X0015F2
1.11
75
1
4
-28
+14
+16
1150
120
F
136D127X0015F2
1.12
50
1
7
-28
+17.5
+20
1450
170
T
136D177X0015T2
0.78
35
2
10
-32
+14
+16
1480
270
T
136D277X0015T2
0.71
30
2
16
-56
+17.5
+20
1740
540
K
136D547X0015K2
0.47
23
6
24
-80
+25
+25
2330
10
C
136D106X0025C2
2.66
220
1
2
-16
+8
+9
715
22
C
136D226X0025C2
1.99
140
1
2
-20
+10.5
+12
800
25 VDC AT +85 °C; 15 VDC AT +125 °C
50
F
136D506X0025F2
1.46
70
1
2
-28
+13
+15
1130
100
F
136D107X0025F2
0.99
50
1
10
-28
+13
+15
1435
120
T
136D127X0025T2
1.16
38
2
6
-32
+13
+15
1450
180
T
136D187X0025T2
0.96
32
2
18
-48
+13
+15
1525
350
K
136D357X0025K2
0.67
24
7
28
-70
+25
+25
1970
30 VDC AT +85 °C; 20 VDC AT +125 °C
8
C
136D805X0030C2
3.32
275
1
2
-16
+8
+12
640
15
C
136D156X0030C2
2.21
175
1
2
-20
+10.5
+12
780
40
F
136D406X0030F2
1.66
65
1
5
-24
+10.5
+12
1120
68
F
136D686X0030F2
1.27
60
1
8
-24
+13
+15
1285
100
T
136D107X0030T2
1.13
40
2
12
-28
+10.5
+12
1450
150
T
136D157X0030T2
1.02
35
2
18
-48
+13
+15
1525
300
K
136D307X0030K2
0.69
25
8
32
-60
+25
+25
1950
15
C
136D156X0035C2
3.10
175
0.75
1.5
-20
+10.5
+12
660
68
F
136D686X0035F2
1.45
60
1
2
-24
+13
+15
1195
270
K
136D277X0035K2
0.70
26
3
12
-58
+25
+25
1950
35 VDC AT +85 °C; 22 VDC AT +125 °C
50 VDC AT +85 °C; 30 VDC AT +125 °C
5
C
136D505X0050C2
3.98
400
1
2
-16
+5
+6
580
10
C
136D106X0050C2
2.66
250
1
2
-24
+8
+9
715
25
F
136D256X0050F2
2.13
95
1
5
-20
+10.5
+12
1005
47
F
136D476X0050F2
1.56
70
1
9
-28
+13
+15
1155
60
T
136D606X0050T2
1.33
45
2
12
-16
+10.5
+12
1335
82
T
136D826X0050T2
1.22
45
2
16
-32
+13
+15
1400
160
K
136D167X0050K2
0.71
27
8
32
-50
+25
+25
1900
Note
Part numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer
polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve,
change the last digit in the part number from “2” to “3”. For RoHS compliant add “E3”.
(1)
Revision: 05-Dec-14
Document Number: 40132
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
136D
www.vishay.com
Vishay
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
PART NUMBER (1)
CODE
MAX. ESR MAX. IMP.
AT +25 °C AT -55 °C
120 Hz
120 Hz
()
()
MAX. DCL (μA)
AT
+25 °C
+85 °C
+125 °C
MAX. CAPACITANCE CHANGE
(%) AT
-55 °C
+85 °C
+125 °C
+6
MAX.
RIPPLE
40 kHz
IRMS
(mA)
60 VDC AT +85 °C; 40 VDC AT +125 °C
4
C
136D405X0060C2
4.65
550
1
2
-16
+5
525
8.2
C
136D825X0060C2
3.24
275
1
2
-24
+8
+9
625
20
F
136D206X0060F2
2.32
105
1
5
-16
+8
+12
930
39
F
136D396X0060F2
1.70
90
1
9
-28
+10.5
+12
1110
50
T
136D506X0060T2
1.33
50
2
12
-16
+10.5
+12
1330
68
T
136D686X0060T2
1.27
50
2
16
-32
+10.5
+15
1365
140
K
136D147X0060K2
0.76
28
8
32
-40
+20
+20
1850
3.5
C
136D355X0075C2
4.74
650
1
2
-16
+5
+6
525
6.8
C
136D685X0075C2
3.42
300
1
2
-20
+8
+9
610
15
F
136D156X0075F2
2.66
150
1
5
-16
+10.5
+9
890
33
F
136D336X0075F2
2.01
90
1
10
-24
+10.5
+15
1000
40
T
136D406X0075T2
1.50
60
2
12
-16
+10.5
+12
1250
75 VDC AT +85 °C; 50 VDC AT +125 °C
56
T
136D566X0075T2
1.31
60
2
17
-28
+10.5
+15
1335
110
K
136D117X0075K2
0.73
29
9
36
-35
+20
+20
1850
2.5
C
136D255X0100C2
5.31
950
1
4
-16
+8
+8
505
4.7
C
136D475X0100C2
4.24
500
1
2
-16
+7
+8
565
11
F
136D116X0100F2
3.02
200
1
4
-16
+7
+8
835
22
F
136D226X0100F2
2.26
100
1
9
-16
+7
+8
965
25
T
136D256X0100T2
1.60
93
2
13
-16
+7
+8
1200
30
T
136D306X0100T2
1.55
80
2
12
-16
+8
+8
1240
43
T
136D436X0100T2
1.31
70
2
17
-20
+8
+8
1335
56
K
136D566X0100K2
0.80
32
10
40
-25
+15
+15
1800
86
K
136D866X0100K2
0.77
30
9
36
-25
+15
+15
1800
100 VDC AT +85 °C; 65 VDC AT +125 °C
125 VDC AT +85 °C; 85 VDC AT +125 °C
1.7
C
136D175X0125C2
7.81
1250
1
2
-16
+7
+8
415
3.6
C
136D365X0125C2
4.98
600
1
2
-16
+7
+8
520
9
F
136D905X0125F2
3.69
240
1
5
-16
+7
+8
755
14
F
136D146X0125F2
2.85
167
1
7
-16
+7
+8
860
18
T
136D186X0125T2
1.85
129
2
9
-16
+7
+8
1130
25
T
136D256X0125T2
1.59
93
2
13
-16
+7
+8
1200
56
K
136D566X0125K2
0.77
32
10
40
-25
+15
+15
1800
Note
(1) Part numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer
polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve,
change the last digit in the part number from “2” to “3”. For RoHS compliant add “E3”.
Revision: 05-Dec-14
Document Number: 40132
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
136D
www.vishay.com
Vishay
EXTENDED RATINGS
CAPACITANCE CASE
PART NUMBER (1)
(μF)
CODE
MAX. ESR MAX. IMP.
AT +25 °C AT -55 °C
120 Hz
120 Hz
()
()
MAX. DCL (μA)
AT
+25 °C
+85 °C
+125 °C
MAX. CAPACITANCE CHANGE
(%) AT
MAX.
RIPPLE
40 kHz
IRMS
(mA)
-55 °C
+85 °C
+125 °C
9
9
14
18
20
24
-64
-77
-88
-88
-90
-90
+13
+16
+16
+20
+20
+25
+16
+20
+20
+25
+25
+30
1000
1500
1500
1900
1900
2300
9
14
20
25
-60
-83
-90
-90
+13
+16
+20
+25
+16
+20
+25
+30
1000
1500
1900
2300
6
9
9
16
20
25
-40
-55
-66
-77
-88
-88
+14
+13
+16
+16
+20
+25
+16
+16
+20
+20
+25
+30
900
900
1450
1450
1850
2300
-35
-44
-62
-66
-74
-77
-77
+12
+13
+16
+16
+20
+20
+25
+16
+16
+15
+20
+25
+25
+30
900
900
1450
1450
1800
1800
2330
-23
-25
-40
-54
-62
-65
-72
-72
+12
+12
+12
+13
+13
+18
+20
+25
+15
+15
+15
+15
+16
+25
+25
+30
800
850
850
1400
1400
1750
1750
2100
-23
-38
-42
-60
-55
-65
-65
+12
+12
+13
+13
+18
+20
+25
+15
+15
+15
+16
+25
+25
+30
800
800
1200
1200
1500
1500
2000
6 VDC AT +85 °C; 4 VDC AT +125 °C
220
560
820
1200
1500
2200
C
F
F
T
T
K
136D227X0006C2
136D567X0006F2
136D827X0006F2
136D128X0006T2
136D158X0006T2
136D228X0006K2
1.50
1.25
1.25
0.75
0.75
0.50
36
21
18
18
18
13
2
3
3
5
5
6
8 VDC AT +85 °C; 5 VDC AT +125 °C
180
680
1500
1800
C
F
T
K
136D187X0008C2
136D687X0008F2
136D158X0008T2
136D188X0008K2
1.50
1.25
0.75
0.50
45
22
18
14
2
3
5
7
10 VDC AT +85 °C; 7 VDC AT +125 °C
120
150
390
560
1200
1500
C
C
F
F
T
K
136D127X0010C2
136D157X0010C2
136D397X0010F2
136D567X0010F2
136D128X0010T2
136D158X0010K2
1.60
1.50
1.25
1.25
0.75
0.50
54
54
27
27
18
15
2
2
3
3
5
7
15 VDC AT +85 °C; 10 VDC AT +125 °C
82
100
270
390
680
820
1000
C
C
F
F
T
T
K
136D826X0015C2
136D107X0015C2
136D277X0015F2
136D397X0015F2
136D687X0015T2
136D827X0015T2
136D108X0015K2
47
56
68
180
270
470
560
680
C
C
C
F
F
T
T
K
136D476X0025C2
136D566X0025C2
136D686X0025C2
136D187X0025F2
136D277X0025F2
136D477X0025T2
136D567X0025T2
136D687X0025K2
47
56
150
220
390
470
560
C
C
F
F
T
T
K
136D476X0030C2
136D566X0030C2
136D157X0030F2
136D227X0030F2
136D397X0030T2
136D477X0030T2
136D567X0030K2
0.95
0.95
1.25
1.25
0.90
0.90
0.60
72
72
31
31
22
22
17
2
2
3
3
6
6
8
6
9
9
16
18
24
32
25 VDC AT +85 °C; 15 VDC AT +125 °C
2.60
2.15
2.15
1.35
1.35
0.90
0.90
0.60
100
90
90
33
33
24
24
19
2
2
2
3
3
6
7
8
6
6
9
9
16
18
28
32
30 VDC AT +85 °C; 20 VDC AT +125 °C
2.60
2.60
1.25
1.25
0.90
0.90
0.65
100
100
36
36
25
25
20
2
2
3
3
6
8
9
6
9
9
16
18
32
36
Note
(1) Part numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer
polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve,
change the last digit in the part number from “2” to “3”. For RoHS compliant add “E3”.
Revision: 05-Dec-14
Document Number: 40132
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
136D
www.vishay.com
Vishay
EXTENDED RATINGS
MAX. ESR MAX. IMP.
AT +25 °C AT -55 °C
CAPACITANCE CASE
PART NUMBER (1)
120 Hz
120 Hz
(μF)
CODE
()
()
MAX. DCL (μA)
AT
+25 °C
+85 °C
+125 °C
MAX. CAPACITANCE CHANGE
(%) AT
MAX.
RIPPLE
40 kHz
IRMS
(mA)
-55 °C
+85 °C
+125 °C
-22
-40
-50
-60
+12
+13
+16
+25
+14
+15
+25
+30
820
1315
1640
2040
6
-22
+12
+14
820
9
12
24
32
36
-29
-36
-42
-46
-46
+10
+13
+12
+20
+25
+12
+15
+15
+25
+30
700
1200
1200
1450
1900
-20
-24
-30
-36
-40
-45
-72
+7
+10
+15
+12
+16
+20
+25
+8
+12
+15
+15
+20
+25
+25
700
700
1100
1100
1400
1850
1850
-36
+12
+15
1100
-19
-19
-25
-30
-35
-40
-60
+10
+10
+12
+12
+16
+20
+22
+12
+12
+15
+15
+20
+25
+22
600
600
1000
1000
1300
1800
2000
-17
-20
-25
-30
-35
+10
+12
+12
+14
+15
+12
+15
+12
+16
+17
800
1300
1400
1600
2000
-14
-18
-26
+10
+12
+14
+12
+15
+16
700
1200
1500
35 VDC AT +85 °C; 22 VDC AT +125 °C
39
120
330
370
C
F
T
K
136D396X0035C2
136D127X0035F2
136D337X0035T2
136D377X0035K2
39
C
136D396X0040C2
2.05
1.25
0.90
0.65
61
31
20
15
2
3
6
9
6
10
18
36
40 VDC AT +85 °C; 25 VDC AT +125 °C
2.05
61
2
50 VDC AT +85 °C; 30 VDC AT +125 °C
33
100
120
270
330
C
F
F
T
K
136D336X0050C2
136D107X0050F2
136D127X0050F2
136D277X0050T2
136D337X0050K2
18
27
82
100
220
270
330
C
C
F
F
T
K
K
136D186X0060C2
136D276X0060C2
136D826X0060F2
136D107X0060F2
136D227X0060T2
136D277X0060K2
136D337X0060K2
100
F
136D107X0063F2
2.50
1.40
1.25
1.00
0.75
135
49
49
30
30
2
4
4
8
9
60 VDC AT +85 °C; 40 VDC AT +125 °C
3.50
2.51
1.45
1.25
0.90
0.70
0.65
160
144
54
54
29
23
31
2
3
4
4
8
9
10
12
12
16
20
32
36
40
63 VDC AT +85 °C; 40 VDC AT +125 °C
1.25
54
2
12
75 VDC AT +85 °C; 50 VDC AT +125 °C
12
22
68
82
180
220
300
C
C
F
F
T
K
K
136D126X0075C2
136D226X0075C2
136D686X0075F2
136D826X0075F2
136D187X0075T2
136D227X0075K2
136D307X0075K2
10
39
56
68
120
C
F
T
T
K
136D106X0100C2
136D396X0100F2
136D566X0100T2
136D686X0100T2
136D127X0100K2
6.8
27
47
C
F
T
136D685X0125C2
136D276X0125F2
136D476X0125T2
2.55
2.57
1.50
1.23
0.90
1.12
0.90
157
157
63
63
30
24
32
3
3
4
4
9
10
12
12
12
16
24
36
40
48
100 VDC AT +85 °C; 65 VDC AT +125 °C
2.99
1.77
1.22
1.11
1.38
200
80
50
40
30
3
5
5
10
12
12
24
20
40
48
125 VDC AT +85 °C; 85 VDC AT +125 °C
5.86
1.77
1.12
300
90
50
3
5
10
12
24
40
56
T
136D566X0125T2
1.11
50
10
40
-26
+14
+16
1500
68
82
K
K
136D686X0125K2
136D826X0125K2
1.10
1.41
32
32
11
12
44
48
-28
-30
+15
+15
+16
+17
1850
1900
Note
Part numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit
following the letter “X” from “0” to “9”; for ± 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer
polyester-film insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve,
change the last digit in the part number from “2” to “3”. For RoHS compliant add “E3”.
(1)
Revision: 05-Dec-14
Document Number: 40132
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages