Data Sheet

SO
T3
23
1PS301
Dual high-speed switching diode
Rev. 5 — 6 March 2012
Product data sheet
1. Product profile
1.1 General description
Dual high-speed switching diode, encapsulated in a very small SOT323 (SC-70)
Surface-Mounted Device (SMD) plastic package.
1.2 Features and benefits
 High switching speed: trr  4 ns
 Repetitive peak reverse voltage:
VRRM  85 V
 Reverse voltage: VR  80 V
 AEC-Q101 qualified
 Low capacitance: Cd  1.5 pF
 Repetitive peak forward current:
IFRM  500 mA
 Very small SMD plastic package
1.3 Applications
 High-speed switching
 General-purpose switching
1.4 Quick reference data
Table 1.
Symbol
Quick reference data
Parameter
Conditions
Min
Typ
Max
Unit
[2]
-
-
250
mA
[3]
-
-
160
mA
-
-
0.5
A
-
-
80
V
-
-
4
ns
Per diode
IF
[1]
forward current
IR
reverse current
VR
reverse voltage
trr
reverse recovery time
VR = 80 V
[4]
[1]
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2]
Single diode loaded.
[3]
Double diode loaded.
[4]
When switched from IF = 10 mA to IR = 10 mA; RL = 100 ; measured at IR = 1 mA.
1PS301
NXP Semiconductors
Dual high-speed switching diode
2. Pinning information
Table 2.
Pinning
Pin
Description
Simplified outline
1
anode (diode 1)
2
anode (diode 2)
3
common cathode
Graphic symbol
3
1
3
2
1
2
006aab034
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name
Description
Version
1PS301
SC-70
plastic surface-mounted package; 3 leads
SOT323
4. Marking
Table 4.
Marking codes
Type number
Marking code[1]
1PS301
B*3
[1]
* = placeholder for manufacturing site code
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
Min
Max
Unit
-
85
V
-
80
V
[2]
-
250
mA
[3]
-
160
mA
-
500
mA
tp = 1 s
-
4
A
tp = 1 s
-
0.5
A
Per diode
VRRM
repetitive peak reverse
voltage
VR
reverse voltage
IF
1PS301
Product data sheet
[1]
forward current
IFRM
repetitive peak forward
current
tp  0.5 s;
  0.25
IFSM
non-repetitive peak forward
current
square wave
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 March 2012
[4]
© NXP B.V. 2012. All rights reserved.
2 of 11
1PS301
NXP Semiconductors
Dual high-speed switching diode
Table 5.
Limiting values …continued
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
Ptot
total power dissipation
Tamb  25 C
Min
Max
Unit
-
300
mW
Per device
[1]
Tj
junction temperature
-
150
C
Tamb
ambient temperature
55
+150
C
Tstg
storage temperature
65
+150
C
[1]
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2]
Single diode loaded.
[3]
Double diode loaded.
[4]
Tj = 25 C before surge.
6. Thermal characteristics
Table 6.
Symbol
Thermal characteristics
Parameter
Conditions
Rth(j-a)
thermal resistance from
junction to ambient
in free air
Rth(j-sp)
thermal resistance from
junction to solder point
Min
Typ
Max
Unit
-
-
415
K/W
-
-
200
K/W
Per device
[1]
[1]
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
7. Characteristics
Table 7.
Characteristics
Tamb = 25 C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
forward voltage
IF = 1 mA
-
610
-
mV
IF = 10 mA
-
740
-
mV
IF = 50 mA
-
-
1.0
V
IF = 100 mA
-
-
1.2
V
VR = 25 V
-
-
30
nA
VR = 80 V
-
-
0.5
A
Per diode
VF
IR
Cd
trr
VFR
1PS301
Product data sheet
reverse current
diode capacitance
VR = 25 V; Tj = 150 C
-
-
30
A
VR = 80 V; Tj = 150 C
-
-
100
A
f = 1 MHz; VR = 0 V
-
-
1.5
pF
reverse recovery time
[1]
-
-
4
ns
forward recovery voltage
[2]
-
-
1.75
V
[1]
When switched from IF = 10 mA to IR = 10 mA; RL = 100 ; measured at IR = 1 mA.
[2]
When switched from IF = 10 mA; tr = 20 ns.
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 March 2012
© NXP B.V. 2012. All rights reserved.
3 of 11
1PS301
NXP Semiconductors
Dual high-speed switching diode
006aac851
300
mbg380
102
IR
(μA)
IF
(mA)
10
200
(1)
(2)
(3)
(1)
1
(2)
(3)
100
10−1
0
0.0
10−2
0.5
1.0
1.5
2.0
0
100
VF (V)
(1) Tj = 150 C; typical values
(1) VR = 80 V; maximum values
(2) Tj = 25 C; typical values
(2) VR = 80 V; typical values
(3) Tj = 25 C; maximum values
(3) VR = 25 V; typical values
Fig 1.
Forward current as a function of forward
voltage
006aac852
0.8
Fig 2.
Tj (°C)
Reverse current as a function of junction
temperature
mbg444
300
Cd
(pF)
200
IF
(mA)
(1)
0.6
200
0.4
(2)
100
0.2
0.0
0
0
4
8
12
16
0
100
VR (V)
f = 1 MHz; Tamb = 25 C
Tamb (°C)
200
FR4 PCB, standard footprint
(1) single diode loaded
(2) double diode loaded
Fig 3.
Diode capacitance as a function of reverse
voltage; typical values
1PS301
Product data sheet
Fig 4.
Forward current as a function of ambient
temperature; derating curves
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 March 2012
© NXP B.V. 2012. All rights reserved.
4 of 11
1PS301
NXP Semiconductors
Dual high-speed switching diode
8. Test information
tr
tp
t
D.U.T.
10 %
+ IF
IF
RS = 50 Ω
SAMPLING
OSCILLOSCOPE
trr
t
Ri = 50 Ω
V = VR + IF × RS
(1)
90 %
VR
mga881
input signal
output signal
(1) IR = 1 mA
Input signal: reverse pulse rise time tr = 0.6 ns; reverse voltage pulse duration tp = 100 ns; duty cycle  = 0.05
Oscilloscope: rise time tr = 0.35 ns
Fig 5.
Reverse recovery time test circuit and waveforms
I
1 kΩ
RS = 50 Ω
D.U.T.
450 Ω
I
V
90 %
OSCILLOSCOPE
VFR
Ri = 50 Ω
10 %
t
tr
t
tp
input signal
output signal
mga882
Input signal: forward pulse rise time tr = 20 ns; forward current pulse duration tp  100 ns; duty cycle   0.005
Fig 6.
Forward recovery voltage test circuit and waveforms
8.1 Quality information
This product has been qualified in accordance with the Automotive Electronics Council
(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is
suitable for use in automotive applications.
1PS301
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 March 2012
© NXP B.V. 2012. All rights reserved.
5 of 11
1PS301
NXP Semiconductors
Dual high-speed switching diode
9. Package outline
2.2
1.8
1.1
0.8
0.45
0.15
3
2.2 1.35
2.0 1.15
1
2
0.4
0.3
0.25
0.10
1.3
Dimensions in mm
Fig 7.
04-11-04
Package outline SOT323 (SC-70)
10. Packing information
Table 8.
Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.[1]
Type number
1PS301
[1]
1PS301
Product data sheet
Package
SOT323
Description
4 mm pitch, 8 mm tape and reel
Packing quantity
3000
10000
-115
-135
For further information and the availability of packing methods, see Section 14.
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 March 2012
© NXP B.V. 2012. All rights reserved.
6 of 11
1PS301
NXP Semiconductors
Dual high-speed switching diode
11. Soldering
2.65
1.85
1.325
solder lands
solder resist
2
2.35
0.6
(3×)
3
solder paste
1.3
1
occupied area
0.5
(3×)
Dimensions in mm
0.55
(3×)
Fig 8.
sot323_fr
Reflow soldering footprint SOT323 (SC-70)
4.6
2.575
1.425
(3×)
solder lands
solder resist
occupied area
1.8
3.65 2.1
09
(2×)
Dimensions in mm
preferred transport
direction during soldering
sot323_fw
Fig 9.
1PS301
Product data sheet
Wave soldering footprint SOT323 (SC-70)
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 March 2012
© NXP B.V. 2012. All rights reserved.
7 of 11
1PS301
NXP Semiconductors
Dual high-speed switching diode
12. Revision history
Table 9.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
1PS301 v.5
20120306
Product data sheet
-
1PS301 v.4
Modifications:
•
The format of this document has been redesigned to comply with the new identity
guidelines of NXP Semiconductors.
•
•
•
•
•
•
•
•
•
Legal texts have been adapted to the new company name where appropriate.
Section 1.1 “General description”: amended
Table 1 “Quick reference data”: added
Section 4 “Marking”: updated
Section 8 “Test information”: added
Figure 7: superseded by minimized package outline drawing
Section 10 “Packing information”: added
Section 11 “Soldering”: added
Section 13 “Legal information”: updated
1PS301 v.4
19990506
Product data sheet
-
1PS301 v.3
1PS301 v.3
19961004
Product specification
-
1PS301 v.2
1PS301 v.2
19960903
Product specification
-
1PS301 v.1
1PS301 v.1
19960403
Product specification
-
-
1PS301
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 March 2012
© NXP B.V. 2012. All rights reserved.
8 of 11
1PS301
NXP Semiconductors
Dual high-speed switching diode
13. Legal information
13.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
13.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
1PS301
Product data sheet
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 March 2012
© NXP B.V. 2012. All rights reserved.
9 of 11
1PS301
NXP Semiconductors
Dual high-speed switching diode
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
14. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
1PS301
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 March 2012
© NXP B.V. 2012. All rights reserved.
10 of 11
1PS301
NXP Semiconductors
Dual high-speed switching diode
15. Contents
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
8.1
9
10
11
12
13
13.1
13.2
13.3
13.4
14
15
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics . . . . . . . . . . . . . . . . . . 3
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Test information . . . . . . . . . . . . . . . . . . . . . . . . . 5
Quality information . . . . . . . . . . . . . . . . . . . . . . 5
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6
Packing information . . . . . . . . . . . . . . . . . . . . . 6
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 8
Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 9
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Contact information. . . . . . . . . . . . . . . . . . . . . 10
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2012.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 6 March 2012
Document identifier: 1PS301