AOS Semiconductor Product Reliability Report AON6520, rev A Plastic Encapsulated Device ALPHA & OMEGA Semiconductor, Inc www.aosmd.com This AOS product reliability report summarizes the reliability result for AON6520. Accelerated environmental tests are performed on a specific sample size, and then followed by electrical test at end point. Review of final electrical test result confirms that AON6520 passes AOS quality and reliability requirements. The released product will be categorized by the process family and be monitored on a quarterly basis for continuously improving the product quality. Table of Contents: I. II. III. IV. Product Description Package and Die information Environmental Stress Test Summary and Result Reliability Evaluation I. Product Description: The AON6520 uses advanced trench technology to provide excellent RDS(ON), low gate charge. This device is suitable for use as a high side switch in SMPS and general purpose applications. -RoHS Compliant -Halogen-Free Detailed information refers to datasheet. II. Die / Package Information: AON6520 Standard sub-micron Low voltage N channel Package Type DFN 5x6 Lead Frame Cu Die Attach Ag epoxy Bonding Wire Cu wire Mold Material Epoxy resin with silica filler MSL (moisture sensitive level) Level 1 based on J-STD-020 Process Note * based on information provided by assembler and mold compound supplier III. Result of Reliability Stress for AON6520 Test Item Test Condition Time Point Lot Attribution Total Sample size Number of Failures MSL Precondition 168hr 85°c /85%RH +3 cycle reflow@260°c - HTGB Temp = 150 °c, Vgs=100% of Vgsmax 168hrs 500 hrs 1000 hrs Temp = 150 °c, Vds=80% of Vdsmax 168hrs 500 hrs 1000 hrs 6 lots 770pcs 0 JESD22A113 308pcs 0 JESD22A108 77pcs / lot 308pcs 0 JESD22A108 4 lots HAST 130 °c, 85%RH, 33.3 psi, Vgs = 100% of Vgs max 100 hrs (Note A) 6 lots 77pcs / lot 330pcs 0 JESD22A110 Pressure Pot 121°°c, 29.7psi, RH=100% 96 hrs (Note A) 4 lots 55pcs / lot 220pcs 0 JESD22A102 Temperature Cycle -65°°c to 150°°c, air to air 250 / 500 cycles (Note A) 4 lots 55pcs / lot 220pcs 0 JESD22A104 (Note A) 55pcs / lot 4 lots (Note A) HTRB Standard Note A: The data presented includes the generic data up to the published date. IV. Reliability Evaluation FIT rate (per billion): 6 MTTF = 19828 years The presentation of FIT rate for the individual product reliability is restricted by the actual burn-in sample size of the selected product (AON6520). Failure Rate Determination is based on JEDEC Standard JESD 85. FIT means one failure per billion hours. 2 9 Failure Rate = Chi x 10 / [2 (N) (H) (Af)] 9 = 1.83 x 10 / [2x (4x2x77 x1000) x (258)] = 6 9 8 MTTF = 10 / FIT =1.74 x 10 hrs = 19828 years Chi² = Chi Squared Distribution, determined by the number of failures and confidence interval N = Total Number of units from HTRB and HTGB tests H = Duration of HTRB/HTGB testing Af = Acceleration Factor from Test to Use Conditions (Ea = 0.7eV and Tuse = 55°C) Acceleration Factor [Af] = Exp [Ea / k (1/Tj u – 1/Tj s)] Acceleration Factor ratio list: Af 55 deg C 70 deg C 85 deg C 100 deg C 115 deg C 130 deg C 150 deg C 258 87 32 13 5.64 2.59 1 Tj s = Stressed junction temperature in degree (Kelvin), K = C+273.16 Tj u = The use junction temperature in degree (Kelvin), K = C+273.16 -5 K = Boltzmann’s constant, 8.617164 X 10 eV / K