PRODUCT DATASHEET VT-IPM2M VersaTRAK® IPm2mTM PRODUCT HIGHLIGHTS n Datalogging and timestamping, trending, alarm logging, and sequence of events n Stand alone control of remote sites IEC 61131 ISaGRAF and high level C++ programming n Limitless multi-user connectivity; telephone, Internet, and wireless telemetry, 10/100 Ethernet plus up to 2 com ports n Advanced communication capabilities report on exception, store & forward, peer to peer n True open system design, Ethernet TCP, Modbus, Linux, OPC & more nSmall to large applications, scalable from 1 to 1,000+ stations n Embedded Linux open source software, add applications, I/O drivers & much more n An OEM’s dream platform, pre-certified, add your application PERFORMANCE SPECIFICATIONS n n n n n n n n n n Industrial powerPC (32 bit data bus) Operating system embedded Linux Dynamic memory (RAM) 32 Mbytes - 32bit, 0 wait states Program memory (Flash) 32 Mbytes Retained memory (RAM) 512K (battery-backed) Local I/O (on-board) 26 (see ordering info.) Limit placed on expansion 256 per I/O type Datalogging support IEC 61131 programming High Level C programming, Linux open source ETHERNET PORT n 10/100BaseTx (auto-detecting) n RJ45 connection (auto-crossover) n Protocols TCP/IP, ARP, UDP, ICNP, DHCP, Modbus/TCP, SIXNET, and more SERIAL PORT n RS485 port A screws (485+, 485-, GND) (2-wire half-duplex) n RS232 Port B RJ45 (TD, RD, CTS, RTS, CD, DTR,DSR, GND) n Protocols (master & slave) SIXNET & Modbus RTU/ASCII; many others available in Linux n Flow control hardware, software, RTS-party (for radios and RS485) DISCRETE INPUTS n 12 channels (sinking or sourcing) Guaranteed ON voltage 9 VDC n Maximum voltage 30 VDC n Guaranteed OFF voltage & current 5.0 VDC & 1.5 mA DC n Input resistance 10K Ohms n Input current @ 24 VDC 3 mA n Filtered ON/OFF delay 25 mS (20 Hz max. counting) n Fast ON/OFF delay 4 mS (100 Hz max. counting) n Count rate (channels 1 - 8) see above (10 KHz on channel 1) n DISCRETE OUTPUTS n n n n n n n n 4 channels (10-30 VDC) Maximum output per channel 1 Amp Maximum output per module 4 Amps Max. OFF state leakage 0.05 mA Minimum load 1 mA Inrush current 5 Amps (100 mS surge) Typical ON resistance 0.3 Ohms Typical ON voltage (@1A) 0.3 VDC ANALOG INPUTS n n n n n n n n 8 channels (4-20 mA) A/D resolution 16 bits (0.003%) Full scale accuracy +/-0.1% (@20°C) Span and offset temp. coef. +/-50 ppm per °C Input impedance 100 Ohm Current protection Self-resetting fuses DMRR (differential mode rejection) 66 dB at 50/60 Hz CMRR (common mode rejection) Not applicable since analog inputs are single ended. ANALOG OUTPUTS n n n n n n n up to 2 channels (4-20 mA) D/A resolution 16 bits (less than 1μA) Full scale accuracy (@20°C) +/- 0.02% Span and offset temp. coef. +/- 50 ppm per °C typical Max. output settling time 5 mS (to .05%) Load resistance range (@ +24 VDC supply) 0-750 Ohms Short circuit protection current limiting ENVIRONMENTAL n DIN rail or flat panel mount Input power 10-30 VDC n Input current 100 mA @ 24 VDC (typical) n Temperature -40 to 70°C (-40 to 85°C storage) n Humidity 5% to 95% RH (non-condensing) n Flammability UL 94V-0 materials n Electrical safety UL 508, CSA C22.2/14; EN610101; (IEC1010) n EMI emissions FCC part 15, ICES-003, Class A; EN55022; EN61326-1 n EMC immunity EN61326-1 (EN61000-4-2,3,4,6) n Vibration IEC68-2-6 n Hazardous locations (Class 1, Div 2, Groups A,B,C,D) UL 1604, CSA C22.2/213, Cenelec EN50021 Zone 2 n All specifications are subject to change. Consult factory for latest info. 331 Ushers Road • Ballston Lake, NY 12019 • USA • +1 518 877 5173 • [email protected] www.sixnet.com Rev: 12/10 VT-IPM2M VersaTRAK® IPm2mTM MECHANICAL DIMENSIONS WIRING DIAGRAM ORDERING INFORMATION Model DI DO AI AO RS232 RS485 Ethernet VT-IPM2M-113-D 12 4 8 0 1 1 10/100 VT-IPM2M-213-D 12 4 8 2 1 1 10/100 331 Ushers Road • Ballston Lake, NY 12019 • USA • +1 518 877 5173 • [email protected] www.sixnet.com