Download

April 2012
New information from CONEC GmbH
Sensor Actor Line
SAL M8x1 assembled
now with screw termination
M8x1 Connectors field attachable
CONEC has recently added connectors with screw termination to the M8x1 field–attachable
connector series. The new version is suitable to terminate stranded or solid wires up to a
cross section of 0,5 mm² by the new screw termination. This new termination allows also
the connection of stranded wires incl. sleeve without reduction of
the maximum allowed cross section. A corresponding key for
the hexagon socket screws are supplied along with each connector.
The versions of field-attachable connectors are available as plug- and
socket with 3- or 4- poles. Additional to the straight version CONEC also offers
a 90° angled version. The housings accept standard cables with
4 to 5,5mm diameter. The current carrying capacity of every contact
is 4A with all contacts under load and 40°C ambient temperature condition. The operating
temperature range is from -30°C to 85°C. The coupling rings are hexagonal shaped (SW13)
and if necessary, a corresponding torque wrench is available from CONEC. The connectors are
IP67 protected when fully mated.
Fur further questions please contact our sales team.
CONEC Elektronische Bauelemente GmbH
Ostenfeldmark 16 • 59557 Lippstadt • Tel. +49 2941 765-0
[email protected] • www.CONEC.com
ISO/TS 16949:2002 / ISO9001:2008
Similar pages