TND323VD Excellent Power Device Inverter and buffer driver for general purpose www.onsemi.com Features • • • • • • • • Inverter buffer Monolithic structure (High voltage CMOS process adopted) Withstand voltage of 25V is assured Wide range of operating voltage : 4.5V to 25V Peak output current : IO+/IO– =0.8A /1A Fast switching time (30ns typical at 1000pF load) Fully compatible input to TTL / CMOS (VIH=up to 2.6V, at VDD=4.5 to 25V) Built-in input pull-down resistance Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Supply Voltage VDD 0 to 25 Input Voltage VIN V GND--0.3 to VDD+0.3 V Allowable Power Dissipation PD max Tj 0.2 W Junction Temperature --55 to +150 °C Storage Temperature Tstg --55 to +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Packing Type : TL Pin Assignment 8 7 6 5 TL Marking 1 2 3 4 Top View DE TND323VD-TL-E TND323VD-TL-H 1 : INA 2 : OUTA 3 : OUTB 4 : INB 5 : GND 6 : VDD 7 : VDD 8 : VDD SOT-28FL / VEC8 LOT No. ORDERING INFORMATION See detailed ordering and shipping information on page 7 of this data sheet. ©Semiconductor Components Industries, LLC, 2015 March 2015 - Rev. 2 1 Publication Order Number: TND323VD/D TND323VD Recommend Operating Conditions at Ta=25°C Parameter Symbol Conditions Ratings Unit Operating Supply Voltage VDD 4.5 to 25 V Operating Temperature Topr -40 to +125 °C Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. Electrical Characteristics (AC Characteristics) at Ta=25°C, VDD=18V, VIN=5V Parameter Turn-On Rise Time Turn-Off Fall Time Delay Time Symbol Conditions Ratings min typ Unit max tr tf CL=1000pF CL=1000pF 35 50 ns 30 45 ns tD1 tD2 CL=1000pF CL=1000pF 30 45 ns 45 60 ns Electrical Characteristics (DC Characteristics) at Ta=25°C, VDD=4.5 to 25V Parameter Logic “1” Input Voltage Logic “0” Input Voltage Logic “1” Input Bias Current Symbol Conditions VIH VIL Ratings min typ Unit max 2.6 V 0.8 100 mA 1 mA Logic “0” Input Bias Current IIN+ IIN-- VIN=VDD=25V VIN=0V High-level Output Voltage VOH IO=0A Low-level Output Voltage VOL IO=0A VDD Supply Current Isupp VDD=10V, VIN=3V, (both inputs) VDD=10V, VIN=0V, (both inputs) 1.0 Output High Short Circuit Pulsed Current IO+ VDD=18V, PW≤10ms, VOUT=0V 0.8 Output Low Short Circuit Pulsed Current IO-- VDD=18V, PW≤10ms, VOUT=18V 1.0 VDD=18V, Iload=10mA, VOUT=“H” 11 16.5 Ω VDD=18V, Iload=10mA, VOUT=“L” 6 10 Ω Output On Resistance ROUT 40 V --1 VDD--0.1 V 0.1 V 4.5 mA 0.2 mA A A Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 2 TND323VD Block Diagram VDD INVERTING IN OUT NON-INVERTING GND Switching Time Test Circuit VDD=18V (6, 7, 8) 4.7mF 0.1mF TND323VD INPUT A (1) OUTPUT A (2) 1000pF INPUT B (4) OUTPUT B (3) 1000pF INPUT RISE AND FALL TIMES=5ns (5) +0.4V INVERTING OUTPUT INPUT +5V +18V 10% tD1 tD2 90% 90% 10% 0V tf NONINVERTING OUTPUT 10% tr tD1 +18V 0V 90% tD2 90% 90% 10% 10% tr tf www.onsemi.com 3 TND323VD tr -- Tc Turn-On Rise Time, tr -- ns 50 30 20 10 0 50 100 tD1 -- Tc 30 25 50 100 tD2 -- Tc 80 30 25 20 IT05640 VDD=18V VIN=5V CL=1000pF 90 35 150 Case Temperature, Tc -- °C 100 Delay Time, tD2 -- ns 40 0 IT10418 VDD=18V VIN=5V CL=1000pF 45 Delay Time, tD1 -- ns 35 15 --50 150 Case Temperature, Tc -- °C 50 70 60 50 40 30 20 15 10 10 --50 0 50 100 IO(+) -- Tc 0 --50 150 Case Temperature, Tc -- °C 0.8 0.6 0 50 100 IO(+) -- VDD 1.6 1.4 VDD=18V 1.0 0.8 0.6 0 50 100 IO(--) -- VDD 1.4 Output "Low" Short Circuit Pulse Current, IO(--) -- A 1.0 0.8 0.6 0.4 0.2 150 Case Temperature, Tc -- °C 1.6 1.2 150 IT05644 1.2 IT10419 VIN=5V 100 IO(--) -- Tc 0.4 --50 150 Case Temperature, Tc -- °C 50 Case Temperature, Tc -- °C 1.4 VDD=18V 1.0 0.4 --50 0 IT05632 Output "Low" Short Circuit Pulse Current, IO(--) -- A 1.2 Output "High" Short Circuit Pulse Current, IO(+) -- A 40 20 0 --50 Output "High" Short Circuit Pulse Current, IO(+) -- A VDD=18V VIN=5V CL=1000pF 45 40 0 tf -- Tc 50 VDD=18V VIN=5V CL=1000pF Turn-Off Fall Time, tf -- ns 60 IT10420 VIN=5V 1.2 1.0 0.8 0.6 0.4 0.2 0 5 10 15 20 Supply Voltage, VDD -- V 25 0 30 IT11993 www.onsemi.com 4 0 5 10 15 20 Supply Voltage, VDD -- V 25 30 IT11994 TND323VD tr -- VDD 80 VIN=5V CL=1000pF 60 50 40 30 20 40 30 20 10 10 0 0 5 10 15 20 tD1 -- VDD 0 30 10 15 20 Supply Voltage, VDD -- V tD2 -- VDD Delay Time, tD2 -- ns 30 20 25 30 IT11996 VIN=5V CL=1000pF 140 120 100 10 80 60 40 20 0 5 10 15 20 Supply Voltage, VDD -- V PD -- Ta 0.25 Allowable Power Dissipation, PD -- W 5 160 40 25 0 30 IT11997 0.20 0.15 0.10 0.05 0 0 IT11995 VIN=5V CL=1000pF 50 Delay Time, tD1 -- ns 25 Supply Voltage, VDD -- V 60 0 VIN=5V CL=1000pF 50 Turn-Off Fall Time, tf -- ns Turn-On Rise Time, tr -- ns 70 tf -- VDD 60 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT11999 www.onsemi.com 5 0 5 10 15 20 Supply Voltage, VDD -- V 25 30 IT11998 TND323VD Package Dimensions unit : mm TND323VD-TL-E, TND323VD-TL-H SOT-28FL / VEC8 CASE 318AH ISSUE O 1 : INA 2 : OUTA 3 : OUTB 4 : INB 5 : GND 6 : VDD 7 : VDD 8 : VDD Recommended Soldering Footprint 2.8 0.6 0.4 0.65 www.onsemi.com 6 TND323VD ORDERING INFORMATION Package Shipping memo TND323VD-TL-E Device SOT-28FL / VEC8 3,000pcs. / Tape and Reel Pb-Free TND323VD-TL-H SOT-28FL / VEC8 3,000pcs. / Tape and Reel Pb-Free and Halogen Free ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. www.onsemi.com 7