ENA0925 D

Ordering number : ENA0925C
1HN04CH
Power MOSFET
100V, 8Ω, 270mA, Single N-Channel
http://onsemi.com
Features
 4V drive
 Halogen free compliance
Specifications
Absolute Maximum Ratings at Ta = 25C
Parameter
Symbol
Conditions
Value
Unit
Drain to Source Voltage
VDSS
100
Gate to Source Voltage
VGSS
20
V
Drain Current (DC)
ID
270
mA
1080
mA
Drain Current (Pulse)
IDP
PW10s, duty cycle1%
Power Dissipation
PD
When mounted on ceramic substrate (900mm20.8mm)
Junction Temperature
Tj
Storage Temperature
Tstg
V
0.6
W
150
C
55 to +150
C
This product is designed to “ESD immunity < 200V*”, so please take care when handling.
* Machine Model
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed,
damage may occur and reliability may be affected.
Thermal Resistance Ratings
Parameter
Symbol
Junction to Ambient
When mounted on ceramic substrate (900mm20.8mm)
Value
RJA
208
Unit
C/W
Electrical Characteristics at Ta  25C
Value
Parameter
Symbol
Conditions
Unit
min
typ
max
Drain to Source Breakdown Voltage
V(BR)DSS
ID=1mA, VGS=0V
Zero-Gate Voltage Drain Current
IDSS
VDS=100V, VGS=0V
Gate to Source Leakage Current
IGSS
VGS=±16V, VDS=0V
Gate Threshold Voltage
VGS(th)
VDS=10V, ID=100A
Forward Transconductance
gFS
VDS=10V, ID=140mA
260
RDS(on)1
ID=140mA, VGS=10V
6
8

RDS(on)2
ID=70mA, VGS=4V
6.8
9.8

15
pF
VDS=20V, f=1MHz
3.1
pF
0.9
pF
Static Drain to Source On-State Resistance
Input Capacitance
Ciss
Output Capacitance
Coss
Reverse Transfer Capacitance
Crss
100
V
1.2
1
A
10
A
2.6
V
mS
Continued on next page.
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of this data sheet.
Semiconductor Components Industries, LLC, 2014
July, 2014
72514HK TC-00003129/52114HK/42814TKIM/90507TIIM PE No.A0925-1/5
1HN04CH
Continued from preceding page.
Value
Parameter
Symbol
Conditions
Unit
min
typ
max
Turn-ON Delay Time
td(on)
10
ns
Rise Time
tr
7.4
ns
Turn-OFF Delay Time
td(off)
58
ns
Fall Time
tf
39
ns
Total Gate Charge
Qg
0.9
nC
Gate to Source Charge
Qgs
0.19
nC
Gate to Drain “Miller” Charge
Qgd
0.26
nC
Forward Diode Voltage
VSD
See specified Test Circuit
VDS=50V, VGS=10V, ID=270mA
IS=270mA, VGS=0V
0.88
1.2
V
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be
indicated by the Electrical Characteristics if operated under different conditions.
Ordering & Package Information
Packing Type:TL
Device
Package
Shipping
note
1HN04CH-TL-W
CPH3, SC-59
SOT-23, TO-236
3,000
pcs. / reel
Pb-Free
and
Halogen Free
Electrical Connection
Marking
Switching Time Test Circuit
No.A0925-2/5
1HN04CH
No.A0925-3/5
1HN04CH
No.A0925-4/5
1HN04CH
Package Dimensions
1HN04CH-TL-W
CPH3
CASE 318BA
ISSUE O
unit : mm
1: Gate
2: Source
3: Drain
2.4
1.4
Recommended Soldering
Footprint
0.6
0.95
0.95
Note on usage : Since the 1HN04CH is a MOSFET product, please avoid using this device in the vicinity
of highly charged objects.
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States
and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of
SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without
further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose,
nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including
without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can
and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are
not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was
negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all
applicable copyright laws and is not for resale in any manner.
PS No.A0925-5/5
Similar pages