NSD070AL Switching Diode Features • NSV Prefix for Automotive and Other Applications Requiring • Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant www.onsemi.com MAXIMUM RATINGS Rating Symbol Value Unit Reverse Voltage VR 70 V Forward Current (DC) IF 200 mA IFSM 500 mA Non−Repetitive Peak Forward Current t = 1.0 s Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. CASE 318 SOT−23 CATHODE 2 CATHODE 1 3 ANODE MARKING DIAGRAM JY MG G JY = Specific Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION Package Shipping† NSD070ALT1G SOT−23 (Pb−Free) 3,000 / Tape & Reel NSVD070ALT1G SOT−23 (Pb−Free) 3,000 / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2015 November, 2015 − Rev. 1 1 Publication Order Number: NSD070AL/D NSD070AL THERMAL CHARACTERISTICS Characteristic Symbol Min Typ Max Unit Thermal Resistance Junction−to−Ambient (Note 1) Total Device Dissipation @ TA = 25°C RqJA PD − − − − 556 225 °C/W mW Junction and Storage Temperature Range TJ, Tstg − − −65 to +150 °C Min Typ Max Unit 70 − − − − − − 5.0 80 − 1.0 2.0 − − − − − − − − 900 1000 1100 1250 − − 3.0 1. FR− 4 = 1.0 0.75 0.062 in. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol OFF CHARACTERISTICS V(BR) Reverse Breakdown Voltage (VR = 70 Vdc) Reverse Voltage Leakage Current (VR = 70 Vdc) (VR = 70 Vdc, TJ = 150°C) IR Diode Capacitance (VR = 0 V, f = 1.0 MHz) CD Forward Voltage (IF = 1.0 mA) (IF = 10 mA) (IF = 50 mA) (IF = 150 mA) VF Reverse Recovery Time (IF = IR = 10 mA) (Figure 1) trr V nA pF mV ms 820 W +10 V 2.0 k 100 mH tr 0.1 mF IF tp t IF trr 10% t 0.1 mF 90% DUT 50 W OUTPUT PULSE GENERATOR 50 W INPUT SAMPLING OSCILLOSCOPE iR(REC) = 1.0 mA IR VR INPUT SIGNAL OUTPUT PULSE (IF = IR = 10 mA; MEASURED at iR(REC) = 1.0 mA) Notes: 1. A 2.0 kW variable resistor adjusted for a Forward Current (IF) of 10 mA. Notes: 2. Input pulse is adjusted so IR(peak) is equal to 10 mA. Notes: 3. tp » trr Figure 1. Recovery Time Equivalent Test Circuit www.onsemi.com 2 NSD070AL TYPICAL CHARACTERISTICS 1.2 CT, TOTAL CAPACITANCE (pF) IF, FORWARD CURRENT (mA) 1,000 100 150°C 10 25°C −65°C TA = 25°C 1.0 0.8 0.6 0.4 0.2 0 1 0 0.2 0.4 0.6 0.8 1.0 1.2 0 10 20 30 40 50 60 VF, FORWARD VOLTAGE (V) VR, REVERSE VOLTAGE (V) Figure 2. Forward Voltage Figure 3. Capacitance www.onsemi.com 3 70 80 NSD070AL PACKAGE DIMENSIONS SOT−23 (TO−236) CASE 318−08 ISSUE AP NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. D SEE VIEW C 3 HE E DIM A A1 b c D E e L L1 HE q c 1 2 b 0.25 e q A L A1 MIN 0.89 0.01 0.37 0.09 2.80 1.20 1.78 0.10 0.35 2.10 0° MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.13 0.18 2.90 3.04 1.30 1.40 1.90 2.04 0.20 0.30 0.54 0.69 2.40 2.64 −−− 10 ° MIN 0.035 0.001 0.015 0.003 0.110 0.047 0.070 0.004 0.014 0.083 0° INCHES NOM 0.040 0.002 0.018 0.005 0.114 0.051 0.075 0.008 0.021 0.094 −−− MAX 0.044 0.004 0.020 0.007 0.120 0.055 0.081 0.012 0.029 0.104 10° L1 VIEW C SOLDERING FOOTPRINT 0.95 0.037 0.95 0.037 2.0 0.079 0.9 0.035 SCALE 10:1 0.8 0.031 mm Ǔ ǒinches ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NSD070AL/D