DC-AC INVERTER UNIT CXA-0406(R) (6,5 W DUAL OUTPUTS) (PRELIMINARY INFORMATION) DESCRIPTION : This low profile DC to AC Inverter is developed for dual lamps. APPLICABLE LCD: 6.4 to 12 inches double lamp type Lamp Voltage 450 Vrms Lamp Current 6.5 mArms Lamp Start Up Voltage 1.300 Vrms (Vin : 5 Vdc) FEATURES : Remote ON/OFF Ext. PWM-Dimming Function RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range +85°C Humidity 95 %RH max 0°C ~ +60°C -20°C ~ Unit : mm Weight :20 (g) typ. L x W xLabel H DIMENSIONS : 105 x 25 x 8.5 mm Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 Part Description PWB Connector CN1 Qty. 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0771 Note t=1.0m m MOLEX 3 Connector CN2 + CN3 2 SM02(8.0)B-BHS-1-TB JST Input side CN1: Pin No. Symbols CN 1-1 Vin CN 1-2 CN 1-3 GND CN 1-4 Vrm t CN 1-5 Vs t CN 1-6 CN 1-7 Ratings 4.75 ~ 5.25 V 0V 2.5~Vin / 0~0.5V 0 V / 5V Vbr 0~3V Output side CN2: Pin No. Symbols Vhigh CN 2-1 N.C. CN 2-2 Vlow CN 2-3 Ratings 340Vrm s (6 m Arm s ) 2V Output side CN3: Pin No. Symbols Vhigh CN 3-1 N.C. CN 3-2 Vlow CN 3-3 Ratings 340Vrm s (6 m Arm s ) 2V Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.0, 15th May 2007 DC-AC INVERTER UNIT CXA-0406(R) (6,5 W DUAL OUTPUTS) (PRELIMINARY INFORMATION) ELECTRICAL CHARACTERISTICS : Parameters Output Current Input Current Vs t Alarm output Shuts dow n Open Circuit Voltage Note 2: Note 3: Iout1 Iout2 Iout3 Iin1 Iin2 F Frequency Note 1 : Symbols lin Vopen Conditions Vrmt Vin (V) Tu (°C) (V) 5.00±0.05 5 +18~+28 4.75±5.25 5 -10~+70 5.00±0.05 5 +18~+28 4.75±5.25 5 -10~+70 4.75±5.25 0 -10~+70 4.75±5.25 5 -10~+70 4.75±5.25 5 -10~+70 4.75±5.25 5 -10~+70 4.75±5.25 5 -10~+70 4.75±5.25 5 -10~+70 4.75±5.25 5 -10~+70 4.75±0.05 5 -10~+70 Specification Unit Min. Typ. Max. 5.8 5.7 2.7 53 230 4.5 4.5 1.050 6.4 6.4 3.2 1.28 0.0 59 255 0.0 5.0 5.0 15 1.150 6.45 6.45 2.45 0.95 1 Max. m Arm s m Arm s m Arm s A mA 54.5 kHz - Vrm s Note Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. Remote ON/OFF (CN1-5) has priority and can not be used in combination with External PWM Dimming (CN1-3). When 'Ext.PWM' (CN1-3) is used 'Vrmt' (CN1-5) should not be connected. The external PWM frequency should be in a range of 100 ~ 500 Hz. For other frequency please request. The optimum is 250 Hz. Here you will normally not get a interference to the vertical sync. frequency. TEST CIRCUIT : Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.0, 15th May 2007