2SC6044 Ordering number : ENN8251 2SC6044 NPN Epitaxial Planar Silicon Transistors High-Current Switching Applications Applications • Voltage regulators, relay drivers, lamp drivers, electrical equipment. Features • • • • Adoption of MBIT process. Low collector-to-emitter saturation voltage. High current capacity. High-speed switching. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 40 V Collector-to-Emitter Voltage VCEO 30 V Emitter-to-Base Voltage VEBO 5 V IC 2 A Collector Current Collector Current (Pulse) Base Current ICP IB Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg 5 A 400 mA Mounted on a ceramic board (450mm2✕0.8mm) 1.3 W Tc=25°C 3.5 W 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol Conditions ICBO IEBO VCB=30V, IE=0 VEB=4V, IC=0 hFE1 hFE2 VCE=2V, IC=100mA VCE=2V, IC=1.5A VCE=10V, IC=300mA fT Cob Ratings min typ max 200 Unit 0.1 µA 0.1 µA 560 65 VCB=10V, f=1MHz Marking : HB 400 MHz 12 pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 31005EA TS IM TB-00001242 No.8251-1/4 2SC6044 Continued from preceding page. Parameter Symbol Collector-to-Emitter Saturation Voltage VCE(sat) Base-to-Emitter Saturation Voltage VBE(sat) Collector-to-Base Breakdown Voltage V(BR)CBO Collector-to-Emitter Breakdown Voltage V(BR)CEO Emitter-to-Base Breakdown Voltage V(BR)EBO Turn-ON Time Storage Time Fall Time ton tstg tf Ratings Conditions min typ IC=1.5A, IB=75mA IC=1.5A, IB=75mA IC=10µA, IE=0 IC=1mA, RBE=∞ IE=10µA, IC=0 See specified Test Circuit. Unit max 170 260 0.94 1.2 mV V 40 V 30 V 5 V 40 ns See specified Test Circuit. 350 ns See specified Test Circuit. 30 ns Package Dimensions unit : mm 2038B Switching Time Test Circuit IB1 PW=20µs D.C.≤1% 4.5 1.6 IB2 1.5 OUTPUT INPUT 1 2 24Ω 50Ω 4.0 1.0 2.5 VR + 100µF + 470µF 3 0.4 --5V 0.4 12V 0.5 20IB1= --20IB2=IC=500mA 1.5 3.0 0.75 1 : Base 2 : Collector 3 : Emitter SANYO : PCP 1 6mA 1.2 3mA 1.0 2mA 0.8 0.6 1mA 0.4 1.5 1.0 --25°C 4mA C 5mA 25°C 20 A VCE=2V Ta=75 ° 1.4 mA 15 IC -- VBE 2.0 8mA 0mA Collector Current, IC -- A Collector Current, IC -- A 1.6 40mA 50mA 30m 1.8 mA IC -- VCE 2.0 0.5 0.2 IB=0 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Collector-to-Emitter Voltage, VCE -- V 1.8 0 2.0 IT09350 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Base-to-Emitter Voltage, VBE -- V 0.9 1.0 IT09351 No.8251-2/4 2SC6044 hFE -- IC 1000 fT -- IC 7 VCE=2V Gain-Bandwidth Product, fT -- MHz VCE=10V DC Current Gain, hFE 7 Ta=75°C 5 25°C --25°C 3 2 100 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 Collector Current, IC -- A 3 2 100 7 5 0.01 3 2 3 5 7 0.1 2 3 5 7 1.0 3 IT09353 VCE(sat) -- IC 5 IC / IB=20 f=1MHz Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 5 Output Capacitance, Cob -- pF 2 Collector Current, IC -- A IT09352 Cob -- VCB 7 5 3 2 10 7 3 2 0.1 °C 25 7 5 °C 75 = Ta 3 C 5° --2 2 0.01 7 5 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 Collector-to-Base Voltage, VCB -- V 5 0.01 5 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- V 5 2 3 5 7 0.1 2 3 5 7 1.0 2 Collector Current, IC -- A 2 3 3 IT09355 <10µs 1m 3 2 s IC=2A 10 DC 1.0 7 5 10 ms 0m s op era tio 3 2 n 0.1 7 5 Tc=25°C Single pulse 0.01 0.1 2 3 5 7 1.0 2 3 5 7 10 2 Collector-to-Emitter Voltage, VCE -- V IT09356 PC -- Ta 1.4 7 1.0 ICP=5A 3 2 3 0.01 5 s 0µ 75°C 3 50 7 2 s 0µ 25°C 7 0.1 10 2 Ta= --25°C 5 ASO 10 7 5 IC / IB=20 1.0 3 Collector Current, IC -- A VBE(sat) -- IC 3 2 IT09354 3 5 IT09357 PC -- Tc 4.0 1.3 3.5 M ou Collector Dissipation, PC -- W Collector Dissipation, PC -- W 1.2 nt 1.0 ed on ac er 0.8 am ic bo ar 0.6 d (4 50 m 0.4 m2 ✕ 0. 8m m ) 0.2 3.0 2.5 2.0 1.5 1.0 0.5 0 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT09358 0 20 40 60 80 100 120 Case Temperature, Tc -- °C 140 160 IT09359 No.8251-3/4 2SC6044 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2005. Specifications and information herein are subject to change without notice. PS No.8251-4/4