Download Product Data Sheet

Custom High Performance Cooling Solutions
w/ maxiGRIP™ Attachment
ATS Part#:
ATS-59004-C1-R0
Description:
maxiGRIP™ HS Assembly, T766, BLACK-ANODIZED, 25MM COMP
Heat Sink Type:
maxiFLOW
Heat Sink Attachment:
maxiGRIP
Equivalent Part Number:
ATS-59004-C2-R0 Discontinued
*Image above is for illustration purpose only.
Features & Benefits
maxiFLOW™ design features a low profile, spread fin array that maximizes surface area for more effective convection (air) cooling
maxiGRIP™ attachment applies steady, even pressure to the component and does not require holes in the PCB
Meets Telcordia GR-63-Core Office Vibration; ETSI 300 019 Transportation Vibration; and MIL-STD-810 Shock and Unpackaged Drop
Testing standards
Comes pre-assembled with high performance, phase changing, thermal interface material
Designed for flip-chip processors such as Freescale MPCs
"Keep-Out" Requirements: An "Un-Populated" border zone of 5mm around the component is necessary to facilitate the
Installation/Removal of the maxiGRIP™ . Please refer to the maxiGRIP™ Keep-Out Guidelines and maxiGRIP™ Installation/Removal
Instructions for further details.
Thermal Performance
@200 LFM
@300 LFM
@400 LFM
@500 LFM
@600 LFM
@700 LFM
@800 LFM
1.0 M/S
1.5 M/S
2.0 M/S
2.5 M/S
3.0 M/S
3.5 M/S
4.0 M/S
Unducted Flow
3.20 °C/W
2.46 °C/W
2.00 °C/W
1.70 °C/W
1.50 °C/W
1.30 °C/W
1.20 °C/W
Ducted Flow
1.90
n/a
n/a
n/a
n/a
n/a
n/a
AIR VELOCITY
THERMAL RESISTANCE
Product Detail
Schematic Image
Dimension A
Dimension B
Dimension C
Dimension D
TIM
Finish
43.0 mm
55.0 mm
12.0 mm
80.0 mm
T766
BLACK-ANODIZED
Schematic image
Notes:
Dimension B refers to component size
Dimension C is the heat sink height from the bottom of the base to the top of the fin field.
ATS-59004-C2-R0 is the exact heat sink assembly with an equivalent thermal interface material
(Saint Gobain C1100F). NOTE: Saint Gobain C1100F is discontinued effective 12/31/10.
Thermal performance data are provided for reference only. Actual performance may vary by
application.
ATS reserves the right to update or change its products without notice to improve the design or
performance.
ATS certifies that this heat sink assembly is RoHS-6 and REACH compliant.
Contact ATS to learn about custom options available.
*Image above is for illustration purpose only.
For more information, to find a distributor or to place an order, please contact us at
781-769-2800 (North America), [email protected] or www.qats.com.
© 2012 Advanced Thermal Solutions, Inc. | 89-27 Access Road | Norwood MA | 02062 | USA
Rev - 121101
Similar pages