Download Product Data Sheet

ATS fanSINK™ with
maxiGRIP™ Attachment
ATS PART # ATS-61330R-C1-R0
Features & Benefits
« X-Cut straight fin heat sink fins offer omnidirectional air flow for
optimum thermal performance independent of PCB lay-out
« Stainless steel screw fan attachment ensures dependable long-term
« Product hole pattern is 24 mm C-C (center to center)
« Component Attachment: ATS maxiGRIP™ is a proven high reliability
« Meets Telecordia GR-63-Core Office Vibration; ETSI 300 019
« maxiGRIP™ hardware includes a high performance plastic frame clip
« Provided with pre-assembled Thermal Interface Material (TIM)
« “Keep-Out” Requirements: An “Un-Populated” boarder zone of
fan to heat sink assembly. 4-40 thread screws are supplied in 4 lengths
(1/2", 3/4", 7/8", 1"). Contact ATS for custom options available.
mechanical attachment system
Transportation Vibration; and MIL-STD-810 Shock Testing and
Unpackaged Drop Testing Standards
and 300 Series stainless steel spring clip- avoiding PCB through holes
E
centered on base
5 mm around the component is necessary to facilitate the installation/
removal of the maxiGRIP™. Please refer to the maxiGRIP™ Keep-Out
Guidelines and Installation/Removal Instructions for further details
F
FAN NOT INCLUDED
Fan type is specific to individual customer requirements and needs
to be independently sourced.
*Images above is for illustration purposes only.
Suggested Fan Details
DIMENSIONS
PART #
DISTRIBUTOR
VOLTAGE
THERMAL RESISTANCE
30 x 30 x 6.9 mm
GM0503PEV1-8
DIGI-KEY
5V
0.88 °C/W
30 x 30 x 10 mm
GM1203PFV1-8
DIGI-KEY
12V
0.86 °C/W
Heat Sink Details
DIM A
DIM B
33 mm
33 mm
DIM C
DIM D
19.5 mm 19 x 19 mm
DIM E
DIM F
INTERFACE MATERIAL
FINISH
ATTACHMENT
FAN
24 mm
24 mm
Chomerics T412
Blk Anodized
maxiGRIP™
Customer Supplied
NOTES:
1)
2)
3)
4)
5)
6)
7)
8)
9)
Fan not included. Fan type is specific to individual customer requirements and needs to be
independently sourced.
Dimension A and B refers to component size.
Dimension C refers to the heat sink height from bottom of the base to the top of the fin field.
Dimension D refers to the size of thermal interface material (TIM) applied to heat sink.
Dimension E and F refers to hole spacing dimensions.
Thermal data reference only. Actual performance may vary by application.
ATS reserves the right to update or change its products without notice.
Optional maxiGRIP™ Installation/Removal Tool Set P/N: MGT330
Contact ATS to learn about custom options available.
For more information, to find a distributor or to place an order,
visit www.qats.com or call 781.769.2800
REV4_0516