DC-AC INVERTER UNIT PS-DA0253-308-B(S) (9 W DUAL OUTPUTS) (PRELIMINARY INFORMATION) DESCRIPTION : This DC to AC Inverter was developed for many other low LCD Backlight power supply as low profile applications. Optimized for LQ170M1LGxx APPLICABLE LCD: 10 to 17 inches dual lamp type Lamp Voltage 710 Vrms Lamp Current 2 x 6.5 mArms Lamp Start Up Voltage 1.700 Vrms (Vin : 12 Vdc) FEATURES : Current Feedback Circuit High Efficiency Low noise with voltage resonant circuit Regulated output current RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity -10°C ~ +50°C -20°C ~ +85°C 95 %RH max DIMENSIONS : Pin1 Pin1 Pin1 Unit : mm Weight :40 (g) typ. Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 Part Description PCB Connector CN1 Qty. 1 1 Material UL94V-0 (FR-4 or CEM-3) 53261-0790 Note t=1mm Molex or equal 3 Connector CN2 ~ CN3 2 SM02B-BHSS-1-TB JST or equal Input side CN1: Pin No. CN 1-1+2 CN 1-3+4 Output side CN2 ~ CN3 Symbols Vin GND Ratings 10.8 ~ 13.2 Vdc CN 1-5 Vrmt CN 1-6 Vbr 0 ~ 0.4 = OFF / 2.5 ~ Vin = ON 0 ~ 1.8 Vdc CN 1-7 Vbr 0~10kOhm Pin No. CN 2-1 Symbols Vhigh Ratings 710 Vrms (6.5 mArms) CN 2-2 Vlow (GND) Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.0, 29th July 2007 DC-AC INVERTER UNIT PS-DA0253-308-B(S) (9 W DUAL OUTPUTS) (PRELIMINARY INFORMATION) ELECTRICAL CHARACTERISTICS : Parameters Symbols Output Current Output Current Input Current Frequency Open Circuit Voltage No Load Shutdown Iout Iout Iin F Vopen Tsd Note 1 : Vin (V) 12±1.2 12±0.6 12±1.2 12±1.2 11.4 12±1.2 Conditions Vrmt Tu (°C) (V) 5±0.25 -10 ~ +50 5±0.25 -10 ~ +50 5±0.25 -10 ~ +50 5±0.25 -10 ~ +50 5±0.25 -10 ~ +50 5±0.25 -10 ~ +50 Specification Min. Typ. Max. 6.0 1.7 32.5 1.500 1.0 6.5 2.0 0.75 40 1.700 - 7.0 2.4 1.0 47.5 1.900 - Unit Note mArms mArms Adc kHz Vrms sec Duty 100% Vbr = 1.8 Vdc without load Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. TEST CIRCUIT : F Vin 10.8 ~ 13.2 V Vopen SW3 Iin A 1000:1 PROBE F CN1-3 CN1-4 Vrmt 0 / 5 Vdc b SW1 CN1-5 Operation of unit a Operation b Non operation SW2 Operation of unit a Vbr 0 ~ 1.8 Vdc dimming b Rbr 0 ~ 10 kOhm dimming RL1 CL1 T1 A ~ a V SW 1 CN2-1 CN1-1 CN1-2 V V ~ CN2-2 Iout 1 SW4 SW5 CN3-1 a Vbr 0 ~ 1.8 Vdc V Rbr 0 ~ 10 kOhm b SW2 CN1-6 RL1 CL1 A ~ CN1-7 CN3-2 Iout 2 SW6 Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.0, 29th July 2007