4649

SENSITRON
SEMICONDUCTOR
SHD120068
SHD120068P
TECHNICAL DATA
DATA SHEET 4649, REV. A
HERMETIC SCHOTTKY RECTIFIER
Very Low Forward Voltage Drop
Features:
•
•
•
•
•
•
Soft Reverse Recovery at Low and High Temperature
Very Low Forward Voltage Drop
Low Power Loss, High Efficiency
High Surge Capacity
Guard Ring for Enhanced Durability and Long Term Reliability
Guaranteed Reverse Avalanche Characteristics
Maximum Ratings
Characteristics
Peak Inverse Voltage
Max. Average Forward Current
Symbol
VRWM
IF(AV)
Max. Average Forward Current
IF(AV)
Max. Peak One Cycle NonRepetitive Surge Current
Non-Repetitive Avalanche Energy
IFSM
Repetitive Avalanche Current
IAR
Maximum Thermal Resistance
RθJC
Max. Junction Temperature
Max. Storage Temperature
TJ
Tstg
EAS
Condition
50% duty cycle, rectangular
wave form (Single)
50% duty cycle, rectangular
wave form (Common Cathode)
8.3 ms, half Sine wave
(per leg)
TJ = 25 °C, IAS = 3.0 A,
L = 4.4 mH (per leg)
IAS decay linearly to 0 in 1 μs
ƒ limited by TJ max VA=1.5VR
(Single)
(Common Cathode)
-
Max.
15
3.0
Units
V
A
6
A
55
A
20
mJ
3.0
A
2.97
5.95
°C/W
-65 to +175
-65 to +175
°C
°C
Max.
0.42
0.38
1.5
Units
V
V
mA
70
mA
240
pF
Electrical Characteristics
Characteristics
Max. Forward Voltage Drop
(per leg)
Max. Reverse Current
Symbol
VF1
VF2
IR1
(per leg)
IR2
Max. Junction Capacitance
(per leg)
CT
Condition
@ 3.0A, Pulse, TJ = 25 °C
@ 3.0A, Pulse, TJ = 125 °C
@VR = 15V, Pulse,
TJ = 25 °C
@VR = 15V, Pulse,
TJ = 125 °C
@VR = 5V, TC = 25 °C
fSIG = 1MHz,
VSIG = 50mV (p-p)
©2004 Sensitron Semiconductor • 221 West Industry Court • Deer Park, NY 11729-4681
PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • [email protected]
SHD120068
SHD120068P
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4649, REV. A
SINGLE
Mechanical Dimensions: in Inches / mm
LCC-5
1
2
3
COMMON CATHODE
2
1
3
PINOUT TABLE
DEVICE TYPE
SINGLE RECTIFIER
COMMON CATHODE - P
PIN 1
CATHODE
COMMON CATHODE
PIN 2
ANODE
ANODE 1
PIN 3
ANODE
ANODE 2
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©2004 Sensitron Semiconductor • 221 West Industry Court • Deer Park, NY 11729-4681
PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • [email protected]
Similar pages