AK8172A

AK8172A
Single Clock Generator
AK8172A
Features
Description
The AK8172A is a single clock generator IC with
an integrated PLL. It can generate a 72.36MHz
clock from a 27MHz master clock input frequency.
A high performance PLL locks to the master clock
input, generating a low jitter, highly accurate clock
output without an external crystal.
Output Frequency Range:
72.36MHz
Input Frequency:
27.000MHz
Low Jitter Performance:
15 ps (Typ.) Period,1σ
Low Current Consumption:
3.6mA (Typ.)
Output Load:
15pF (max.)
Supply Voltage:
VDD:1.7-1.9V
Operating Temperature Range:
-20 to +85℃
Package:
4-pin USON(lead free)
Body size: 1.3 mm x 1.1mm
Applications
Digital still camera
Block Diagram
VDD
CLKIN
INPUT
Buffer
PLL
OUTPUT
Buffer
CLKOUT
VSS
AK8172A Single Clock Generator
MS1369-E-00
Mar-12
-1-
AK8172A
Pin Descriptions
4:VSS
1:VDD
Package: 4-Pin USON (Top View)
*lead-free
3:CLKIN
2:CLKOUT
Pin
No.
Pin
Name
Pin
Type
1
VDD
--
2
CLKOUT
OUT
3
CLKIN
IN
Clock input. (27MHz) 1.8V or 3.3V available.
When CLKIN connects VDD or VSS, CLKOUT outputs low.
4
VSS
--
Ground.
Description
Power Supply
Clock output
Output clock frequency is 72.36MHz.
Ordering Information
Part Number
Marking
Shipping Packaging
Package
Temperature
Range
AK8172AU
72A(AK8172A)
Tape and Reel
4-pin USON
-20 to 85 ℃
Mar-12
MS1369-E-00
-2-
AK8172A
Absolute Maximum Rating
Over operating free-air temperature range unless otherwise noted
Items
Supply Voltage
Input Voltage
Symbol
Ratings
Unit
VDD
-0.3 to 4.6
V
Vin
VSS-0.3 to 3.6
V
IIN
±10
mA
Tstg
-55 to 130
C
Input Current (any pins except supplies)
Storage Temperature
(1)
Note
(1) Stress beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.
These are stress ratings only. Functional operation of the device at these or any other conditions beyond those
indicated under “Recommended Operating Conditions” is not implied. Exposure to absolute-maximum-rating
conditions for extended periods may affect device reliability. Electrical parameters are guaranteed only over the
recommended operating temperature range.
ESD Sensitive Device
This device is manufactured on a CMOS process, therefore, generically susceptible to
damage by excessive static voltage. Failure to observe proper handling and
installation procedures can cause damage. AKM recommends that this device is handled with
appropriate precautions.
Recommended Operation Conditions
Parameter
Operating Temperature
Supply Voltage
(1)
Symbol
Min
Ta
-20
VDD
1.7
Input Clock Frequency
Fin
Input Clock Duty Cycle
Findc
Output Load Capacitance
Conditions
Cpl
Typ
Max
Unit
85
C
1.8
1.9
V
27.0000
At VDDI/2
Pin: CLKOUT
30
50
MHz
70
%
15
pF
(1) A decoupling capacitor of 0.1F for power supply line should be installed close to each VDD pin.
MS1369-E-00
Mar-12
-3-
AK8172A
DC Characteristics
All specifications at VDD: over 1.7 to 1.9V, Ta: -20 to +85℃, Input Frequency: 27MHz,
unless otherwise noted
Parameter
Symbol
High Level Input Voltage
Low Level Input Voltage
(1)
(1)
Input Current
Conditions
VIH
Pin: CLKIN
VIL
Pin: CLKIN
IL 1
Pin: CLKIN
High Level Output
Voltage
VOH
Low Level Output
Voltage
VOL
Current Consumption
IDD
(1) VDDI=1.7-1.9V, 2.7-3.6V.
MIN
TYP
MAX
Unit
0.7VDDI
Pin: CLKOUT
IOH=-4mA
V
-1
0.3VDDI
V
+1
μA
0.8VDD
V
Pin: CLKOUT
0.2VDD
IOL=+4mA
No load
3.6
V
mA
VDDI means XO operation voltage.
AC Characteristics
All specifications at VDD: over 1.7 to 1.9V, Ta: -20 to +85℃, Input Frequency: 27MHz,
unless otherwise noted
Parameter
Symbol
Output Clock Frequency
Conditions
Fo
CLKIN=27MHz
Fodc
At VDD/2
trise
Output Clock Fall Time
(2) (3)
Output Clock Duty Cycle
Output Clock Rise Time
(2) (3)
(2) (3)
(2) (3)
Output Clock Jitter
Output Lock Time
(1)
MIN
TYP
MAX
72.36
45
50
Unit
MHz
55
%
0.2VDD to 0.8VDD
4.0
ns
tfall
0.2VDD to 0.8VDD
4.0
ns
Jit
Period, 1
15
ps
tlock
Power-up
0.2
ms
(1) The time that output reaches the target frequency within accuracy of ±0.1% from the point that the
power supply reaches VDD
(2) With the load capacitance specified by the recommended operation conditions
(3) Design value
Mar-12
MS1369-E-00
-4-
AK8172A
Package Information
 Mechanical data (Units:mm)
0.58+0.02
-0.03
1.30±0.05
1.10±0.05
S
0.05
0.25±0.05
M
0.25±0.05
0.525±0.05
0.05
S
.05
C0
0.50
 Marking
b
7 2 A
YMA
a: #1 Pin Index
b: Part number
c: Date code (3 digits)
c
a
AKM is the brand name of AKM’s IC’s.
AKM and the logo -
- are the brand of AKM’s IC’s and identify that AKM
continues to offer the best choice for high performance mixed-signal solution under
this brand.
MS1369-E-00
Mar-12
-5-
AK8172A
 RoHS Compliance
All integrated circuits form Asahi Kasei Microdevices Corporation (AKM)
assembled in “lead-free” packages* are fully compliant with RoHS.
(*) RoHS compliant products from AKM are identified with “Pb free” letter indication on
product label posted on the anti-shield bag and boxes.
IMPORTANT NOTICE
 These products and their specifications are subject to change without notice.
When you consider any use or application of these products, please make inquiries the sales
office of Asahi Kasei Microdevices Corporation (AKM) or authorized distributors as to current
status of the products.
 AKM assumes no liability for infringement of any patent, intellectual property, or other rights in
the application or use of any information contained herein.
 Any export of these products, or devices or systems containing them, may require an export
license or other official approval under the law and regulations of the country of export
pertaining to customs and tariffs, currency exchange, or strategic materials.
 AKM products are neither intended nor authorized for use as critical components Note1) in any
safety, life support, or other hazard related device or system Note2), and AKM assumes no
responsibility for such use, except for the use approved with the express written consent by
Representative Director of AKM. As used here:
Note1) A critical component is one whose failure to function or perform may reasonably be
expected to result, whether directly or indirectly, in the loss of the safety or effectiveness of
the device or system containing it, and which must therefore meet very high standards of
performance and reliability.
Note2) A hazard related device or system is one designed or intended for life support or
maintenance of safety or for applications in medicine, aerospace, nuclear energy, or other
fields, in which its failure to function or perform may reasonably be expected to result in loss
of life or in significant injury or damage to person or property.
 It is the responsibility of the buyer or distributor of AKM products, who distributes, disposes of,
or otherwise places the product with a third party, to notify such third party in advance of the
above content and conditions, and the buyer or distributor agrees to assume any and all
responsibility and liability for and hold AKM harmless from any and all claims arising from the
use of said product in the absence of such notification.
Mar-12
MS1369-E-00
-6-
Similar pages
7231