SHD124511 SHD124511P SHD124511N SHD124511D SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4172, REV.- VERY LOW DROP HERMETIC POWER SCHOTTKY RECTIFIER (SINGLE / DUAL) DESCRIPTION: A 30 VOLT, 45 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC TO-258 PACKAGE. MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED. RATING PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT With Cathode Maintained (@ TC=70 OC) SYMBOL MAX. UNITS PIV 30 Volts IO 45 Amps IO 60 Amps IFSM 200 Amps CT 3300 pF RθJC 0.47 °C/W Top/Tstg -65 to + 150 °C Vf 0.74 Volts (Single / Doubler) MAXIMUM DC OUTPUT CURRENT With Cathode Maintained (@ TC=70 OC) (Common Cathode / Common Anode) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT PER LEG (t = 8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE PER LEG =5V) (V r MAXIMUM THERMAL RESISTANCE PER PACKAGE MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 45 Amps) PER LEG TJ = 25 °C TJ = 100 °C 0.63 MAXIMUM REVERSE CURRENT (Ir @ 30 V PIV) TJ = 25 °C TJ = 125 °C Ir 6 mA 300 • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail - [email protected] • SENSITRON SEMICONDUCTOR SHD124511 SHD124511P SHD124511N SHD124511D TECHNICAL DATA DATA SHEET 4172, REV. – MECHANICAL DIMENSIONS: In Inches / mm .165 (4.19 .155 3.94) SINGLE .270 (6.86 .240 6.10) .695 (17.65 Dia. .685 17.40) COMMON CATHODE .045 (1.14 .035 0.89) 1 2 3 1 2 3 .835 (21.21 .707 (17.96 .815 20.70) .697 17.70) .550 (13.97 .530 13.46) COMMON ANODE DOUBLER 1 3 1.302 (33.07 1 1.202 30.53) 2 .065 (1.65 .055 1.40) 3 Places 3 .200(5.08) BSC 2 Places 2 2 1 .140(3.56) BSC TO-258 PINOUT TABLE TYPE SINGLE RECTIFIER DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) DOUBLER (D) Note: Vf curves are for bare die only. PIN 1 CATHODE ANODE 1 CATHODE 1 ANODE PIN 2 ANODE COMMON CATHODE COMMON ANODE ANODE/CATHODE Typical Forward Characteristics 10 3 PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE Typical Reverse Characteristics 2 103 R (mA) 150 °C Instantaneous Reverse Current - I 101 125 °C 100 °C 101 75 °C 100 50 °C 10-1 25 °C 10-2 125 °C 0 100 10-1 0.0 0.1 0.2 0.3 0.4 0.5 Forward Voltage Drop - FV(V) 10 20 30 Reverse Voltage - RV (V) 40 Typical Junction Capacitance 25 °C 0.6 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 150 °C 102 3000 2700 2400 2100 1800 0 10 20 30 Reverse Voltage - RV (V) 40 • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail - [email protected] • SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] •