610

SHD124524
SHD124524P
SHD124524N
SHD124524D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 610, REV. A
POWER SCHOTTKY RECTIFIER
Very Low Voltage Drop
DESCRIPTION: 100 VOLT, 45 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC TO-258 PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
100
Volts
IO
45
Amps
IFSM
200
Amps
MAXIMUM THERMAL RESISTANCE (per leg)
R
1.15
C/W
MAXIMUM JUNCTION TEMPERATURE RANGE
Top
-65 to
+ 175
C
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
Tstg
-65 to
+ 175
C
Vf
0.95
Volts
PEAK INVERSE VOLTAGE
O
MAXIMUM DC OUTPUT CURRENT @ TC=100 C
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT
(t = 8.3ms, Sine) (per leg)
JC
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 45 Amps) (per leg)
TJ = 25 C
0.85
TJ = 125 C
MAXIMUM REVERSE CURRENT (Ir @ 100V PIV) (per leg)
TJ = 25 C
Ir
mA
20
TJ = 125 C
MAXIMUM JUNCTION CAPACITANCE (Vr =5V) (per leg)
1.5
CT
1400
1999 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
pF
SHD124524
SHD124524P
SHD124524N
SHD124524D
SENSITRON
DATA SHEET 610, REV. A
MECHANICAL DIMENSIONS: In Inches / mm
.165 (4.19
Dia.
.155 3.94)
SINGLE
.270 (6.86
.240 6.10)
.695 (17.65
.685 17.40)
COMMON CATHODE
.045 (1.14
.035 0.89)
1
.835 (21.21
.815 20.70)
.707 (17.96
.697 17.70)
1.302 (33.07
1.202 30.53)
1
2
3
1
2
COMMON ANODE
.550 (13.97
.530 13.46)
3
DOUBLER
3
1
.065 (1.65
.055 1.40)
3 Plac es
2
.200(5.08) BSC
2 Plac es
TYPE
SINGLE RECTIFIER
DUAL RECTIFIER, COMMON CATHODE (P)
DUAL RECTIFIER, COMMON ANODE (N)
DOUBLER (D)
.140(3.56) BSC
2
3
1
2
3
TO-258
PINOUT TABLE
PIN 1
PIN 2
CATHODE
ANODE
ANODE 1
COMMON CATHODE
CATHODE 1
COMMON ANODE
ANODE
ANODE/CATHODE
PIN 3
ANODE
ANODE 2
CATHODE 2
CATHODE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
1999 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
Similar pages