254

SHD125244
SHD125244P
SHD125244N
SHD125244D
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 254, REV. F
HERMETIC POWER SCHOTTKY RECTIFIER
SINGLE / DUAL COMMON CATHODE, COMMON ANODE, DOUBLER
DESCRIPTION: A 100 VOLT, 30 AMP POWER SCHOTTKY RECTIFIER IN A HERMETIC TO-254
PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE AT TC = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
100
Volts
IO
15
Amps
IO
30
Amps
MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT (t=8.3ms,
Sine) (per leg)
IFSM
150
Amps
JUNCTION CAPACITANCE VR = 5Vdc (per leg)
CT
600
pF
2.82
C/W
PEAK INVERSE VOLTAGE
MAXIMUM DC OUTPUT CURRENT (TC = 100 C)
(SINGLE / DOUBLER)
MAXIMUM DC OUTPUT CURRENT (TC = 100 C)
(COMMON CATHODE / COMMON ANODE)
MAXIMUM THERMAL RESISTANCE (per leg)
R
MAXIMUM OPERATING TEMPERATURE RANGE
Top/stg
-55 to
+175
C
SYMBOL
MAX.
UNITS
Vf
0.93
Volts
JC
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP (IF = 15A) (per leg)
TJ = 25 C
0.83
TJ = 125 C
MAXIMUM REVERSE CURRENT (Ir @ PIV) (per leg)
TJ = 25 C
TJ = 125 C
Ir
0.35
8.0
1999 Sensitron Semiconductor 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681
PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
mA
SHD125244
SHD125244P
SHD125244N
SHD125244D
SENSITRON
TECHNICAL DATA
DATA SHEET 254, REV. F
MECHANICAL DIMENSIONS: In Inches / mm
.149 (3.78
Dia.
.139 3.53)
.545 (13.84
.535 13.60)
.800 (20.32
.790 20.07)
.685 (17.40
.665 16.89)
1.235 (31.37
1.195 30.35)
1
2
.260
.249
.050
.040
SINGLE
(6.60
6.32)
(1.27
1.02)
1
.545 (13.84
.535 13.58)
2
1
.150(3.81) BSC
2 Places
2
PIN 1
CATHODE
ANODE 1
CATHODE 1
ANODE
3
3
2
Instantaneous Reverse Current - IR (mA)
175 °C
0
10
200 °C
175 °C
100
150 °C
125 °C
10-1
100 °C
-2
10
75 °C
50 °C
10-3
25 °C
10-4
125 °C
0
20
40
60
80
Reverse Voltage - VR (V)
100
120
Typical Junction Capacitance
Junction Capacitance - CT (pF)
25 °C
10
10-2
0.1
0.2
1
PIN 3
ANODE
ANODE 2
CATHODE 2
CATHODE
Typical Reverse Characteristics
200 °C
-1
3
DOUBLER
PIN 2
ANODE
COMMON CATHODE
COMMON ANODE
ANODE/CATHODE
101
Instantaneous Forward Current - IF (A)
2
TO-254
Typical Forward Characteristics
10
1
.150(3.81) BSC
PINOUT TABLE
TYPE
SINGLE RECTIFIER
DUAL RECTIFIER, COMMON CATHODE (P)
DUAL RECTIFIER, COMMON ANODE (N)
DOUBLER (D)
VF curves shown are for die only.
1
3
COMMON ANODE
3
.045 (1.14
.035 0.89)
3 Places
COMMON CATHODE
0.3
0.4
0.5
0.6
0.7
Forward Voltage Drop - VF (V)
0.8
400
300
200
100
0
20
40
60
80
Reverse Voltage - VR (V)
100
120
1999 Sensitron Semiconductor 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681
PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
SENSITRON
SEMICONDUCTOR
SHD125244
SHD125244P
SHD125244N
SHD125244D
TECHNICAL DATA
DATA SHEET 254, REV. F
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of
users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
1999 Sensitron Semiconductor 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681
PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
Similar pages