1 2 3 4 5 TECHNICAL CHARACTERISTICS A MATERIAL INSULATOR: PA 46 FLAMMABILITY RATING: UL94-V0 COLOR: BEIGE CONTACT MATERIAL: PHOSPHOR BRONZE CONTACT TYPE: STAMPED CONTACT PLATING: TIN QUALITY CLASS: 25 MATING CYCLES PITCH: 1.00 MM ENVIRONMENTAL OPERATING TEMPERATURE: -25 UP TO 85°C COMPLIANCE: LEAD FREE AND ROHS ELECTRICAL CURRENT RATING:1A WORKING VOLTAGE: 50 VAC INSULATOR RESISTANCE: >100 MΩ DIELECTRIC WITHSTANDING VOLTAGE: 500VAC/MN CONTACT RESISTANCE: 20 mΩ MAX B STANDARD CERTIFIED: E323964 SOLDERING SOLDER TEMP.: JEDEC LEAD FREE REFLOW SOLDERING 0.3 PACKAGING TAPE & REEL WITH CAP DIMENSION A = NB. PIN - 1 B = NB. PIN - 1 + 3 C RoHS Compliant PROJECTION: GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 B A 14-OCT-14 16-JUL-14 TPK DWG UPDATE PDF QL AS SCALE: DESCRIPTION: WR-WTB 1.00 MM SMT MALE HORIZONTAL SHROUDED HEADER SHEET: 1/3 WERI PART NO: 665 1xx 131 822 REV DATE FILE BY DRAW: AS APPROVAL: BBu UNIT: MM SIZE A4 D 1 2 3 4 5 A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: BBu B A REV DATE FILE BY UNIT: MM SCALE: DESCRIPTION: WR-WTB 1.00 MM SMT MALE HORIZONTAL SHROUDED HEADER SHEET: 2/3 WERI PART NO: 665 1xx 131 822 DRAW: AS SIZE A4 D 1 2 3 4 5 Cautions and Warnings: This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. A B C RoHS Compliant PROJECTION: G F GENERAL TOLERANCE .X = +/- 0.2 .XX = +/- 0.15 E D C APPROVAL: JC B UNIT: MM DESCRIPTION: DISCLAIMER SIZE WERI PART NO: DISCLAIMER A4 SCALE: A 10-SEP-14 PDF QL SHEET: 3/3 REV DATE FILE BY DRAW: QL D