DM-3100 Series Multi Format Exciter Specifications DM-3100A Model Standards Analog Supported Digital DM-3100AB NTSC DM-3100BD PAL B/G/D/K/M, - NTSC DVB-T ATSC ISDB-T/Tb ISDB-T/Tb EN50083-9 EN50083-9 EN50083-9 EN50083-9 BNC 75Ωx4 BNC 75Ωx4 BNC 75Ωx2 BNC 75Ωx1- BNC 75Ωx1 TS-IN - - - - [Video IN] - 1Vpp, BNC, 75Ω 1Vpp, BNC, 75Ω - [Audio IN] - [NICAM BB IN] - SMPTE-310M BNC 75Ωx2 0ｄBm, DF11-4, 600Ωx2 NICAM Base band 0dBm, BNC, 75Ω [V AGC IN] [A AGC IN] Reflect [Feedback IN] RF OUT [V RF OUT] 0ｄBm, DF11-4, - 600Ωx2 NICAM Base band - 0dBm, BNC, 75Ω BNC 50Ωx1 (TNC 50Ωx1) (Internal GPS option) Visual RF feedback, RF feedback, Visual RF feedback, RF feedback, +5dBm to +10dBm, +2.5dBm sync. Peak, +5dBm to +10dBm, +2.5dBm sync. Peak, +5dBm to +10dBm, BNC, 50Ω BNC, 50Ω BNC, 50Ω BNC, 50Ω BNC, 50Ω Aural RF feedback, - +2.5dBm, BNC, 50Ω TX Reflect signal, RF feedback, +3dBm±3dB, +10dBm, BNC, 50Ω BNC, 50Ω VHF(170-230MHz), VHF(170-230MHz), UHF(470 -862MHz), UHF(470 -862MHz), +17dBm sync peak, +10dBm, BNC, 50Ω BNC, 50Ω Aural RF feedback, - +2.5dBm, BNC, 50Ω TX Reflect signal, RF feedback, +3dBm±3dB, +10dBm, BNC, 50Ω BNC, 50Ω VHF(170-230MHz), VHF(174-216MHz), UHF(470 -862MHz), UHF(470 -806MHz), +17dBm sync peak, +10dBm, BNC, 50Ω BNC, 50Ω - UHF(470 -862MHz), RF MON[V RF MON] UHF(470 -862MHz), - VHF(170-230MHz), UHF(470 -862MHz), +10dBm, BNC, 50Ω - +10dBm, BNC, 50Ω 20dB lower than RF OUT, BNC, 50Ω 20dB lower than - A RF OUT, 20dB lower than - A RF OUT, BNC, 50Ω Local MON - BNC, 50Ω 0dBm ± 6dB, BNC, 50Ω LAN 100Base-TX / 10Base-T, RJ45 REMOTE Parallel status/command serial RS-485 control, 15pin HD-D-sub female RS232C Serial control, 9pin D-sub male Parallel AUX - VHF(170-230MHz), - +10dBm, BNC, 50Ω [A RF MON] - RF feedback, VHF(170-230MHz), A RF OUT - TTL Level (1.5GHz, 3 to 33dB antenna system gain), (GPS ANT) RF FB IN - DM-3100 Series Multi Format Exciter 10MHz, -3dBm to +10dBm (Sine Wave), BNC, 50Ω 1PPS IN Control - DVB-T 10MHz IN Output DM-3100D EN50083-9 DVB-ASI Input DM-3100C PAL B/G/D/K/M, - status/command, 15pin HD-D-sub female Parallel status, 15pin HD-D-sub female Parallel status/command, 15pin HD-D-sub female Parallel status, 15pin HD-D-sub female - 100 to 240V AC 50/60Hz Power Supply Less than 100W Power Consumption 44 (H) x 480 (W) x 520 (D) mm Dimensions Approx. 7kg Weight Common Features Compact, one-rack unit size All-band direct conversion for RF signal unit - Synthesizer tunes to all VHF BIII and UHF channels. Adaptive Digital Correction - Automatically IMD adjustment and optimize Safety precautions To install, make connections and operate this product, please carefully read and observe instructions, precautions and recommendations in our instruction manuals. The colours in this brochure may differ from those of the actual unit. Designs and specifications of this product is subject to change without prior notice. For additional information: Please contact your nearest NEC sales offices or visit www.nec.com. NEC Corporation Global Business Unit Broadcast and Video Systems 7-1, Shiba 5-chome, Minato-ku, Tokyo, 108-8001, Japan Tel: +81-3-3798-5463 Fax: +81-3-3798-8476 - Free from daily maintenance of the IMD adjustment - Instant call out of user settings from 15 parameter banks. - Easily acquisition of the compensation coefficient of frequency and group-delay properties. Fully digitized circuit for non-linearity NEC Europe Ltd. NEC Asia Pacific Pte. Ltd. NEC Latin America S.A. - I/Q vector analysis for precise correction factors Athene, Odyssey Business Park West End Road, South Ruislip Middlesex HA4 6QE, United Kingdom Tel: +44-(0)20-8836-2000 Fax:+44-(0)20-8836-2001 No. 1 Maritime Square #12-10 HarbourFront Center Singapore 099253 Tel: +65-6278-1818 Fax:+65-6271-2088 Av. Paulista, 2.300 01310-300 Sao Paulo, SP Tel: +55-(0)11-3151-7000 Fax:+55-(0)11-3151-7218 - Automatic linearity correction for analog © 2013 NEC Corporation. NEC and the NEC logo are registered trademarks of NEC Corporation. Parameter bank NEC Corporation Cat.No. H01-12080007E http://www.nec.com/global/prod/nw/broadcast/ DM-3100 Series Multi Format Exciter DM-3100AB DM-3100BD Exciter for Analog Audio Input 1 A/D Audio Input 2 More than meets the eye NICAM Base band Input A/D Video Input A/D Matrix Sync Process Preemphasis RX EQ FM MOD I Q Digital I/Q VSB Filter Digital Pre-Corrector Direct RF Converter A Output Digital Pre-Corrector Direct RF Converter V Output Sampling DATA Key Features Fully compliant with DVB-T, ATSC, ISDB-T/Tb standards Internal GPS receiver available as option (DM-3100A ,DM-3100C, DM-3100D) Fully compliant with PAL B/G/D/K/M and NTSC-M DVB-T receiver available as option (DM-3100A) Simple TX control function (DM-3100A ,DM-3100C) Easy maintenance OPERATION PANEL LCD TS I/F FEC Code SEL TRELLIS Code Framing ASI-2 flexibility. Digital Pre-Corrector Direct RF Converter RF Output TS I/F Correction Factor Sampling DATA Easy Analog/Digital switchover by external contact input (DM-3000AB, DM-3000 BD) - Selects higher or lower input bit rate for greater bit rate output Digital I/Q ASI-1 - Control and status through web browser. Flexible bit rate (DM-3100A ,DM-3100C) RF Feedback TS-1 Web base Graphical User Interface (DM-3100A ,DM-3100C) - MIP/IIP decoding and SFN-delay function implemented. RX Module DM-3100C Exciter for ATSC TS-2 SFN function (DM-3100A, DM-3100D) DSP Auto Corr. Sel To TX Control - Integrated simple TX control function for low-power TX applications. - MER/SNR and IM monitoring function without test equipment CONT Carrier Synthesizer Correction Factor Carrier Synthesizer DSP Adaptive Corr. Easy changeover of 6, 7, 8 MHz bandwidths (DM-3100A, DM-3100D) OPERATION PANEL LCD RX Module External 10MHz RF Feedback CONT SNR, IM DATA for monitoring - No change of hardware required. Simple TX control for low-power TX application PA and EX SW control Forward /Reflection output monitoring Block Diagram DM-3100A Exciter for DVB-T DM-3100D Exciter for ISDB-T/Tb ASI-1 ASI-2 SFN Delay TS I/F FEC Coder 1st Layer for(HP) ASI-1 ASI-2 DEMUX SFN Delay TS I/F Mapping Framing IFFT Digital Pre-Corrector Inner Coder ASI FSYNC TS I/F SFN Delay Outer Coder FEC Coder Sampling DATA 2nd Layer for(LP) Correction Factor DSP Adaptive Corr. OPERATION PANEL LCD Direct RF Converter RF Output Carrier Synthesizer RX Module Inner Coder INT, Framing Mapping IFFT Digital Pre-Corrector Direct RF Converter RF Output Inner Coder External 10MHz Sampling DATA Correction Factor Carrier Synthesizer External 10MHz RF Feedback CONT MER, IM DATA for monitoring Simple TX control for low-power TX application OPERATION PANEL LCD CONT DSP Adaptive Corr. RX Module RF Feedback MER, IM DATA for monitoring PA and EX SW control Forward /Reflection output monitoring To TX Control DM-3100 Series Multi Format Exciter DM-3100AB DM-3100BD Exciter for Analog Audio Input 1 A/D Audio Input 2 More than meets the eye NICAM Base band Input A/D Video Input A/D Matrix Sync Process Preemphasis RX EQ FM MOD I Q Digital I/Q VSB Filter Digital Pre-Corrector Direct RF Converter A Output Digital Pre-Corrector Direct RF Converter V Output Sampling DATA Key Features Fully compliant with DVB-T, ATSC, ISDB-T/Tb standards Internal GPS receiver available as option (DM-3100A ,DM-3100C, DM-3100D) Fully compliant with PAL B/G/D/K/M and NTSC-M DVB-T receiver available as option (DM-3100A) Simple TX control function (DM-3100A ,DM-3100C) Easy maintenance OPERATION PANEL LCD TS I/F FEC Code SEL TRELLIS Code Framing ASI-2 flexibility. Digital Pre-Corrector Direct RF Converter RF Output TS I/F Correction Factor Sampling DATA Easy Analog/Digital switchover by external contact input (DM-3000AB, DM-3000 BD) - Selects higher or lower input bit rate for greater bit rate output Digital I/Q ASI-1 - Control and status through web browser. Flexible bit rate (DM-3100A ,DM-3100C) RF Feedback TS-1 Web base Graphical User Interface (DM-3100A ,DM-3100C) - MIP/IIP decoding and SFN-delay function implemented. RX Module DM-3100C Exciter for ATSC TS-2 SFN function (DM-3100A, DM-3100D) DSP Auto Corr. Sel To TX Control - Integrated simple TX control function for low-power TX applications. - MER/SNR and IM monitoring function without test equipment CONT Carrier Synthesizer Correction Factor Carrier Synthesizer DSP Adaptive Corr. Easy changeover of 6, 7, 8 MHz bandwidths (DM-3100A, DM-3100D) OPERATION PANEL LCD RX Module External 10MHz RF Feedback CONT SNR, IM DATA for monitoring - No change of hardware required. Simple TX control for low-power TX application PA and EX SW control Forward /Reflection output monitoring Block Diagram DM-3100A Exciter for DVB-T DM-3100D Exciter for ISDB-T/Tb ASI-1 ASI-2 SFN Delay TS I/F FEC Coder 1st Layer for(HP) ASI-1 ASI-2 DEMUX SFN Delay TS I/F Mapping Framing IFFT Digital Pre-Corrector Inner Coder ASI FSYNC TS I/F SFN Delay Outer Coder FEC Coder Sampling DATA 2nd Layer for(LP) Correction Factor DSP Adaptive Corr. OPERATION PANEL LCD Direct RF Converter RF Output Carrier Synthesizer RX Module Inner Coder INT, Framing Mapping IFFT Digital Pre-Corrector Direct RF Converter RF Output Inner Coder External 10MHz Sampling DATA Correction Factor Carrier Synthesizer External 10MHz RF Feedback CONT MER, IM DATA for monitoring Simple TX control for low-power TX application OPERATION PANEL LCD CONT DSP Adaptive Corr. RX Module RF Feedback MER, IM DATA for monitoring PA and EX SW control Forward /Reflection output monitoring To TX Control DM-3100 Series Multi Format Exciter Specifications DM-3100A Model Standards Analog Supported Digital DM-3100AB NTSC DM-3100BD PAL B/G/D/K/M, - NTSC DVB-T ATSC ISDB-T/Tb ISDB-T/Tb EN50083-9 EN50083-9 EN50083-9 EN50083-9 BNC 75Ωx4 BNC 75Ωx4 BNC 75Ωx2 BNC 75Ωx1- BNC 75Ωx1 TS-IN - - - - [Video IN] - 1Vpp, BNC, 75Ω 1Vpp, BNC, 75Ω - [Audio IN] - [NICAM BB IN] - SMPTE-310M BNC 75Ωx2 0ｄBm, DF11-4, 600Ωx2 NICAM Base band 0dBm, BNC, 75Ω [V AGC IN] [A AGC IN] Reflect [Feedback IN] RF OUT [V RF OUT] 0ｄBm, DF11-4, - 600Ωx2 NICAM Base band - 0dBm, BNC, 75Ω BNC 50Ωx1 (TNC 50Ωx1) (Internal GPS option) Visual RF feedback, RF feedback, Visual RF feedback, RF feedback, +5dBm to +10dBm, +2.5dBm sync. Peak, +5dBm to +10dBm, +2.5dBm sync. Peak, +5dBm to +10dBm, BNC, 50Ω BNC, 50Ω BNC, 50Ω BNC, 50Ω BNC, 50Ω Aural RF feedback, - +2.5dBm, BNC, 50Ω TX Reflect signal, RF feedback, +3dBm±3dB, +10dBm, BNC, 50Ω BNC, 50Ω VHF(170-230MHz), VHF(170-230MHz), UHF(470 -862MHz), UHF(470 -862MHz), +17dBm sync peak, +10dBm, BNC, 50Ω BNC, 50Ω Aural RF feedback, - +2.5dBm, BNC, 50Ω TX Reflect signal, RF feedback, +3dBm±3dB, +10dBm, BNC, 50Ω BNC, 50Ω VHF(170-230MHz), VHF(174-216MHz), UHF(470 -862MHz), UHF(470 -806MHz), +17dBm sync peak, +10dBm, BNC, 50Ω BNC, 50Ω - UHF(470 -862MHz), RF MON[V RF MON] UHF(470 -862MHz), - VHF(170-230MHz), UHF(470 -862MHz), +10dBm, BNC, 50Ω - +10dBm, BNC, 50Ω 20dB lower than RF OUT, BNC, 50Ω 20dB lower than - A RF OUT, 20dB lower than - A RF OUT, BNC, 50Ω Local MON - BNC, 50Ω 0dBm ± 6dB, BNC, 50Ω LAN 100Base-TX / 10Base-T, RJ45 REMOTE Parallel status/command serial RS-485 control, 15pin HD-D-sub female RS232C Serial control, 9pin D-sub male Parallel AUX - VHF(170-230MHz), - +10dBm, BNC, 50Ω [A RF MON] - RF feedback, VHF(170-230MHz), A RF OUT - TTL Level (1.5GHz, 3 to 33dB antenna system gain), (GPS ANT) RF FB IN - DM-3100 Series Multi Format Exciter 10MHz, -3dBm to +10dBm (Sine Wave), BNC, 50Ω 1PPS IN Control - DVB-T 10MHz IN Output DM-3100D EN50083-9 DVB-ASI Input DM-3100C PAL B/G/D/K/M, - status/command, 15pin HD-D-sub female Parallel status, 15pin HD-D-sub female Parallel status/command, 15pin HD-D-sub female Parallel status, 15pin HD-D-sub female - 100 to 240V AC 50/60Hz Power Supply Less than 100W Power Consumption 44 (H) x 480 (W) x 520 (D) mm Dimensions Approx. 7kg Weight Common Features Compact, one-rack unit size All-band direct conversion for RF signal unit - Synthesizer tunes to all VHF BIII and UHF channels. Adaptive Digital Correction - Automatically IMD adjustment and optimize Safety precautions To install, make connections and operate this product, please carefully read and observe instructions, precautions and recommendations in our instruction manuals. The colours in this brochure may differ from those of the actual unit. Designs and specifications of this product is subject to change without prior notice. For additional information: Please contact your nearest NEC sales offices or visit www.nec.com. NEC Corporation Global Business Unit Broadcast and Video Systems 7-1, Shiba 5-chome, Minato-ku, Tokyo, 108-8001, Japan Tel: +81-3-3798-5463 Fax: +81-3-3798-8476 - Free from daily maintenance of the IMD adjustment - Instant call out of user settings from 15 parameter banks. - Easily acquisition of the compensation coefficient of frequency and group-delay properties. Fully digitized circuit for non-linearity NEC Europe Ltd. NEC Asia Pacific Pte. Ltd. NEC Latin America S.A. - I/Q vector analysis for precise correction factors Athene, Odyssey Business Park West End Road, South Ruislip Middlesex HA4 6QE, United Kingdom Tel: +44-(0)20-8836-2000 Fax:+44-(0)20-8836-2001 No. 1 Maritime Square #12-10 HarbourFront Center Singapore 099253 Tel: +65-6278-1818 Fax:+65-6271-2088 Av. Paulista, 2.300 01310-300 Sao Paulo, SP Tel: +55-(0)11-3151-7000 Fax:+55-(0)11-3151-7218 - Automatic linearity correction for analog © 2013 NEC Corporation. NEC and the NEC logo are registered trademarks of NEC Corporation. Parameter bank NEC Corporation Cat.No. H01-12080007E http://www.nec.com/global/prod/nw/broadcast/