SENSITRON SEMICONDUCTOR SHD140222P TECHNICAL DATA DATASHEET 672, REV. - HERMETIC SCHOTTKY RECTIFIER FEATURES: Electrically Equivalent to 1N6660 Hermetic Surface Mount With Stress Relief Leads DESCRIPTION: 45 VOLT, 30 AMP, RECTIFIER IN A HERMETIC SHD-6C PACKAGE. MAXIMUM RATINGS ALL RATINGS ARE AT TA = 25 C UNLESS OTHERWISE SPECIFIED. RATING SYMBOL MAX. UNITS PIV 45 Volts IO 30 Amps PEAK SINGLE CYCLE SURGE CURRENT tp = 8.3 msec. IFSM 300 Amps MAXIMUM THERMAL RESISTANCE (PER LEG) R 0.6 C/W PEAK INVERSE VOLTAGE (PER LEG) MAXIMUM DC OUTPUT CURRENT (TC = 100 C) JC MAXIMUM OPERATING TEMPERATURE RANGE - -65 to +150 C JUNCTION CAPACITANCE VR = 10Vdc, f = 1mHz CJ 2000 pF SYMBOL MAX. UNITS Vf 0.75 Volts VSIG = 50mV (p-p) (Max) ELECTRICAL CHARACTERISTICS CHARACTERISTICS MAXIMUM FORWARD VOLTAGE DROP (PER LEG) (If = 15 Amps) IF = 15A, TA = 25 C 0.65 IF = 15A,TA = 125 C MAXIMUM REVERSE CURRENT Ir @ PIV (PER LEG) Ir 1.0 mA 40 mA 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web Site - www.sensitron.com E-mail Address - [email protected] SHD140222P SENSITRON TECHNICAL DATA DATASHEET 672, REV. MECHANICAL DIMENSIONS: In Inches / mm PINOUT TABLE TYPE PIN 1 DUAL RECTIFIER, COMMON CATHODE COMMON CATHODE .250 +/- .020 PIN 2 ANODE 1 PIN 3 ANODE 2 .250 +/- .020 .920 +/- .005 3 .610 .070 .510 1 2 2X .220 TOP VIEW 3X .785 +/- .005 .210 +/- .010 .100 6X R .075 4 X .012 +/- .002 3X .147 .025 SIDE VIEW 3X .100 SHD-6C SCHEMATIC COMMON CATHODE 1 2 3 221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web Site - www.sensitron.com E-mail Address - [email protected] SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected] •