Aerospace & Defense Solutions Brochure

Trusted Source
With headquarters in Phoenix, Arizona, and on-shore design and manufacturing centers, ON Semiconductor offers
a secure, stable environment for the development of advanced semiconductor solutions for aerospace and defense
applications.
ON Semiconductor has been granted Category 1A Trusted Design and Trusted Foundry accreditation for its onshore fabrication facilities in Idaho and Oregon. This enables ON Semiconductor to support the trusted flow from
ASIC design through wafer fabrication. The Department of Defense (DOD) Trusted Program accredits trusted, secure
sources for the development and manufacture of Application Specific Integrated Circuits (ASICs) for a wide range of
critical DOD applications including GPS, thermal imaging, image sensors, and encrypted media. The program seeks
to negate the potential risk of system counterfeiting, tampering or sabotage.
ON Semiconductor has also been granted ‘Trusted Broker’ accreditation with Defense Microelectronics Activity
(DMEA), enabling the company to support the entire trusted manufacturing process through engagement with other
trusted suppliers. The combination of the three accreditations benefits military and defense customers by providing
a fully integrated trusted manufacturing solution.
In addition, ON Semiconductor maintains ITAR certification and QML flows required for military designs.
Page 2
Aerospace & Defense Solutions
Processes and Capabilities
ON Semiconductor is certified to the following process standards:
•MIL-PRF-38535
•MIL-STD-750
•ISO/TS 16949
•AS 9100 Rev. C
•STACK
•ISO 9000
•QS9000
•TL9000
•ESCC-9020
•ESCC-2269000
Environmental Performance
ON Semiconductor provides robust silicon technologies for ASIC products that are characterized over an
extended temperature range from cryogenic to 150°C, as well as a portfolio of plastic and hermetic packaging
suitable for high reliability end applications.
Process Longevity
ON Semiconductor operates modularized wafer fabrication processes that enable the company to offer extended
process lifetimes, meeting the market need for secure, long life-cycle processes to support long product lives
of ten years or more. This approach also allows the company to support low volume requirements of aerospace
and defense customers. An established, flexible EOL process enables adequate transition or EOL planning.
ON Semiconductor
Page 3
Radiation Hardened By Design Solutions
Robust ASICs for Aerospace Applications
ON Semiconductor offers Application Specific Integrated Circuit (ASIC) solutions critical for aerospace applications and
products requiring rigorous FIT rates due to terrestrial radiation exposure. A combination of characterization test data,
soft-error-aware design flow methodology, qualification, and handling flows allow customers multiple options in planning
and designing ASICs in a wide variety of applications. Available in the company’s 110 nm and 180 nm digital processes,
the standard cell and SRAM architectures achieved superior neutron test results across voltage and temperature. To further
reduce Single Event Effects (SEE), the design offering includes enhanced substrates, redundancy and error correction code
(ECC) options. Leveraging the company’s existing commercial digital ASIC flow, customers benefit from superior pricing,
development spans and manufacturing cycle times.
ONC18 FIT (Sea Level, NYC) 1.8 V FIT Per M Bit
1.5 V FIT Per M Bit
ONC110 FIT (Sea Level, NYC)
1.20 V FIT Per M Bit
Dual Port SRAM
618
778
HDSP SRAM
360
Single Port SRAM
492
704
DP SRAM
290
Flip Flop*
313
529
Flip Flop*
358
* Singel bit FIT only. Redundancy will significantly reduce FIT.
No SEL at 85°C, 1.93 V.
No MBU or SEFI.
* Singel bit FIT only. Redundancy will significantly reduce FIT.
No SEL at 125°C, 1.26 V.
No MBU or SEFI.
Soft Error Mitigation Solutions for Aerospace
ON Semiconductor has a wide range of design solutions to mitigate soft errors while taking density, power, and performance into account. A combination of proven Rad Hard by Design (RHBD) techniques and process enhancements deliver
outstanding neutron test results. Be it partial, sequential, or full Triple Modular Redundancy (TMR), ON Semiconductor can
tailor an ASIC development flow to meet the design and application needs of a wide range of aerospace applications.
Page 4
Aerospace & Defense Solutions
Radiation Hardened By Design Solutions
Robust ASICs for Space and High Reliability Applications
ON Semiconductor offers Radiation Hardened by Design (RHBD) solutions critical for space and Hi-Rel applications.
Available in the company’s 110 nm digital Application Specific Integrated Circuit (ASIC) processes, the design offering
includes a novel flip-flop architecture called Self Restoring Logic (SRL). SRL remains hard to single event effects at
high Linear Energy Transfer (LET) while operating up to 700 MHz, far exceeding the capability of legacy RHBD flip-flop
architectures. A latch-up resistant Dual Port SRAM with on-board error correction code (ECC), hardened clock elements,
high-speed I/O cells, and a single event latch up protection cell expand the design portfolio. These cells are compatible
with the existing digital ASIC flows resulting in superior pricing, development spans and manufacturing cycle times.
ONC110 Test Results
Total Ionizing Dose (Si)
300 kRads
SRL Onset LET (700 Mhz)
107 Mev cm2/mg (Si)
SEL Tolerant
Tested to 125 Mev cm2/mg (Si) at 150°C and Vdd +10%
Dose Rate Upset
Tested to 1 x 109 rad(si)/s
Dose Rate Latch-Up
Tested to 3 x 108 rad(si)/s
Neutron SEE
1 x 1012 n/cm2 (1 MeV equivalent)
Proven Rad-Hard Solutions for Space
ON Semiconductor has a wide range of design solutions to mitigate radiation effects. Hardened IP and a proven
commercial ASIC development flow combine to achieve results that meet the design and application needs of a wide range
of applications. The company’s ASIC legacy spans five decades and includes thousands of design-from-spec, customer
interactive, and FPGA conversion success stories. The addition of 110 nm RHBD capabilities enables ON Semiconductor to
expand our ASIC heritage and service the needs of existing and new customers.
ON Semiconductor
Page 5
Product Processing
Special Packaging
•Custom package developments
•Drop in replacement for ASICs / FPGAs
•No need to modify the board footprint
•Aerospace / defense packaging
•From ceramic packages to complex flip-chip
BGAs
•On-shore assembly and test capabilities
•Thermally enhanced packages
Extended Temperature
•ON Semiconductor supports extended
temperature in several technologies
•-55 to +125°C for 0.5 µm and 0.35 µm
process technology
•-55 to +150°C for 180 nm process technology
•-55 to +150°C for 110 nm process technology
Page 6
Security Capability
•ON Semiconductor partners with third party IP
providers
•Offers anti-tamper, error correction, and encryption
capabilities with third parties
Avionics
•Demonstrated SEL immunity
•Soft error rate data available for logic and
memories for 110 nm and 180 nm process
technologies
Non-Volatile Memory
•0.5 mm and 0.35 mm process technologies offer up
to 1 kb EEPROM with a maximum configuration of
32 x 32; temperature ranges vary
•ONC18 (180 nm) offers two memory options
•One Time Programmable (OTP) up to 256 kb;
-40 to +125°C
•EE Array up to 1 kb
•SP110 (110 nm) capable of supporting OTP
•-40 to +125°C up to 312 kb
Aerospace & Defense Solutions
Advanced Processes and Intellectual Property
Digital Standard Cell Product Families
Standard Cell Product Families
Family
Core
Voltage
I/O
Voltage
I/O
Types
System
Performance
Special
Features
5V
5 V, 3.3 V
PCI, TTL, LVTTL, LVCMOS
75 MHz
Long-Term 5 V Support, High Temp
SC5
0.5 mm
SC3
0.35 mm
ONC18
180 nm
3.3 V, 2.5 V
5 V, 3.3 V
PCI, GTL, HSTL, SSTL, LVTTL, LVCMOS, LVPECL
100 MHz
EEPROM, High Temp
3.3 V, 1.8 V,
1.5 V
3.3 V, 2.5 V, 1.8 V
PCI, DCI, HSTL, SSTL, LVTTL, LVCMOS, LVPECL, LVDS
266 MHz
NVM, OTP, High Vt, High Temp
SP110
110 nm
1.2 V
PCI, DCI, HSTL, SSTL, LVTTL, LVCMOS, LVPECL, LVDS, CML
450 MHz
OTP, Dual Source Capability, Mil Temp
PCI, DCI, HSTL, SSTL, LVTTL, LVCMOS, LVPECL, LVDS, CML
600 MHz
Extensive IP Portfolio
PCI, DCI, HSTL, SSTL, LVTTL, LVCMOS, LVPECL, LVDS, CML
850 MHz
Extensive IP Portfolio
SP65/55
65 nm, 55 nm
1.2 V, 1.0 V
SP45/40
45 nm, 40 nm
1.1 V, 0.9 V
3.3 V, 2.5 V,
1.8 V, 1.5 V, 1.2 V
3.3 V, 2.5 V,
1.8 V, 1.5 V, 1.2 V
3.3 V, 2.5 V,
1.8 V, 1.5 V, 1.2 V
Comprehensive Intellectual Property Offering
ON Semiconductor offers a suite of system IP suitable for a
variety of applications, including those requiring high-speed
serial I/O (SerDes), external high performance memory
interfaces, processors and a variety of other hard and soft IP.
Combined with support for a rich family of I/O standards, our
digital ASIC technologies and IP provide optimal solutions for
military/aerospace, communications, industrial, consumer,
computing, and medical applications. ON Semiconductor is
an ARM® microprocessor licensee, and has access to multiple
ARM cores for integration into silicon products.
Category
IP Cores
Hi-Speed SerDes
PCI Express Gen 1/2/3, XAUI, SATA I/II/II, EPON,
Serial Rapid I/O (SRIO), 1G Ethernet, 10G Ethernet,
Fibre Channel
Serial Interfaces
USB 3.0/2.0/1.1, HDMI, I2C, CAN, UART
Application Layer Support
10/100 Ethernet, 1G Ethernet, 10G Ethernet,
PCI Express Gen 1/2/3, SATA I/II/III, SRIO, USB
3.0/2.0/1.1, DDRX Controllers, EMAC4, MII, RMII,
SMII, XFI, HDMI
Bus Interfaces
PCI, AMBA/AHB, ARM7, PLB, PCMCIA
Microprocessors
ARM, PowerPC, R-Core, M8051, AMBA/AHB
Peripherals
Memory Interfaces
DDR, DDR2, DDR3, QDR-II
Data Converters
ADC, DAC
Memory
SRAM, DPRAM, Register File, ROM, OTP
Clocking
PLLs, DLLs, MSDLL
Error Correction, Encryption ECC, DES, 3DES, Reed-Solomon, RNG, PK Processor,
& Anti-Tamper
Secure SRAM
ON Semiconductor
DSP Functions
FFT, Mult, Divide, Accumulate, Up/Down Converter,
FIR
FPGA Conversion IP
Memory Wrappers, LUT RAM, I/O Standards, Hardware
DSP Functions, FIFOs, Clocking Emulation
Page 7
Custom ASIC Designs
Digital solutions from 0.5 m m to 28 nm
•Flexible ASIC design interfaces including whole or partial RTL,
Netlist, and GDSII content
•Robust FPGA proof-of-concept validation flow when targeting
an ASIC
•FPGA-to-ASIC, ASIC-to-ASIC, and multi-chip-to-ASIC conversions
•EOL support with ASIC-to-ASIC conversion approach
•Big D (Digital) / Small A (Analog) ASIC capability to increase
integration and simplify board design
•Up to 50 million gates and 50 million bits of memory
•System architects to advise on best overall solution
•Proven technologies to ensure long term, continuous supply
•Secure supply with domestic manufacturing
•Support for long-life, small volume applications
•High reliability, high temperature, special packaging and handling
•Complete solutions including product development, test, package
engineering, quality engineering, and failure analysis
•Full ITAR handling available
•DO-254 compliance support
•Custom packaging capability to match most pin-outs and
package types
RTL Hand-off
Specification Hand-off
RTL Checking
Logic Synthesis
RTL Development
RTL Checking
Logic Synthesis
Third-Party
Gate-Level Netlist
Hand-off
ON Semiconductor
Gate-Level Netlist
Hand-off
Gate-level Translation
Gate-level Checking
Gate-level
Checking
ASIC Design Flow
Memory Configuration
Memory BIST Insertion
IP Integration and Verification
(Transceivers, μP, Analog,
Memory Interfaces)
IP, I/O, Clock Gen
Configuration, Insertion, Verification
Scan and JTAG Insertion
Automatic Test Pattern Generation
Static Timing and Power Analysis
LEC and Functional Simulation
Floor Planning
Automatic Place and Route
DRC, LVS, LEC, Extraction
Post Layout Simulation
ASIC Manufacturing
Wafer Fabrication
Package, Assembly, Test
Prototype ASIC Devices
Production Finished Goods
Page 8
Aerospace & Defense Solutions
High Performance Image Sensors
With over 40 years of imaging expertise, ON Semiconductor is a leading supplier of
high performance CCD and CMOS image sensors. Our broad portfolio of products
includes devices with resolutions ranging from VGA to over 50 megapixels supported by
pixel sizes that span from 1 to 24 microns. And our advanced design and processing
techniques can be utilized in the development of custom CCD and CMOS products
specifically designed to address the most demanding imaging applications.
Broad Portfolio of Standard Devices
•Rolling and Global Shutter CMOS for high speed, low power, and readout
flexibility
•Full Frame and Interline Transfer CCD for high dynamic range, low noise, and excellent image uniformity
•Interline Transfer EMCCD for very low light imaging (to moonlight or starlight)
•Radiation tolerant designs for use in high radiation environments
Advanced Technology Base
•CCD and CMOS pixel designs
•Electron Multiplication
•High-speed readout architectures
•CMOS Backside Illumination
•SOC integration
•Specialized Color Filter Array (CFA)
configurations
•Dedicated co-processors
•Military qualification grades available
ON Semiconductor
Page 9
Integrated Passive Devices (IPD) — Efficient RF System-in-Package Solutions
Integrating passive devices into our HighQ™ copper platform gives a cost-effective,
space-saving solution for all RF needs.
IPD Technology Characteristics
• Target frequency: 500 MHz to
40 GHz
• Low profile, minimal footprint
• Tight tolerance
Typical Applications
• Power amplifiers
• Antenna switch modules
• Electronic countermeasures
• Software defined/cognitive radio
Typical IPD Designs
• Baluns
•Couplers
•Diplexers
• Balanced Filters
•Splitters
• Matching networks
IPD Technology (R, L, C)
Al–Pad
Performance
• Guaranteed ±5.0% capacitor
tolerance
• Typical < 1% variance between
capacitors on common IPD
• Dual Cu stack up of 12 µm for
high Q inductors
Thickest Inductors in the Industry
MIM (SiN)
High Tolerance Caps
Optional Resistors
Insulating Oxide
High Resistivity Silicon Substrate
Dual Copper Stackup with Full Length Stitched Via
Page 10
Aerospace & Defense Solutions
IPD Technology
Advantages
•Smaller than discrete solutions
•Thinner & higher precision than LTCC
•Lower cost than GaAs
•Best performance among
silicon-based IPDs
Inductor Coil
Dual Low Pass Filter
State of the Art Fab
• Standard Mechanical InterFace system (SMIF) results
in high and consistent yields
• Located in Gresham, Oregon
• Fab Certifications:
»ISO14001
» QML (DoD)
»ISO/TS16949
» ITAR (DoD)
»AS9100B
» Trusted Foundry Status
»OHSAS18001
Design and Foundry Services
• Complimentary feasibility study
• Design services available
• Self-service design with full featured PDK for
Cadence and Agilent
• Four 8-inch dedicated prototype wafers
• Shuttles with multiple designs/variants
ON Semiconductor
Page 11
Sales and Design Assistance from ON Semiconductor
ON Semiconductor Technical Support
www.onsemi.com/support
ON SEMICONDUCTOR INTERNATIONAL SALES OFFICES
GREATER CHINA
FRANCE
GERMANY
INDIA
ISRAEL
ITALY
JAPAN
KOREA
MALAYSIA
SINGAPORE
SLOVAKIA
UNITED KINGDOM
Beijing
Hong Kong
Shenzhen
Shanghai
Taipei, Taiwan
Paris
Munich
Bangalore
Raanana
Milan
Tokyo
Seoul
Penang
Singapore
Piestany
Windsor
86-10-8577-8200
852-2689-0088
86-755-8209-1128
86-21-5131-7168
886-2-2377-9911
33 (0)1 39-26-41-00
49 (0) 89-93-0808-0
91-98-808-86706
972 (0) 9-9609-111
39 02 9239311
81-3-5817-1050
82-31-786-3700
60-4-6463877
65-6484-8603
421 33 790 2450
44 1753 62 6718
ON Semiconductor Distribution Partners
Allied Electronics
www.alliedelec.com
(800) 433-5700
Altima Corp.
www.altima.co.jp
(81) 45 476 2155
Arrow Electronics
www.arrow.com
(800) 777-2776
Avnet
www.em.avnet.com
(800) 332-8638
Chip One Stop, Inc.
www.chip1stop.com/maker/on
(81) 45 470 8771
Daiwa Distribution Ltd.
www.daiwahk.com
(852) 2341 3351
Digi-Key
www.digikey.com
(800) 344-4539
EBV Elektronik
www.ebv.com/en/locations.html
(49) 8121 774-0
Future & FAI Electronics
www.futureelectronics.com/contact
1-800-FUTURE1 (388-8731)
Mouser Electronics
www.mouser.com
(800) 346-6873
Newark/Farnell
www.farnell.com/onsemi
(800) 4-NEWARK
OS Electronics Co., Ltd.
www.oselec.jp
Japanese: (81) 3 3255 5985
Other Languages: (81) 3 3255 6066
Promate Electronic Co.
www.promate.com.tw
(886) 2 2659 0303
RinnoVent Co., Ltd.
(Ryosan Group)
www.ryosan.co.jp
(81) 3 3862 2440
RS Components KK
jp.rs-online.com
(81) 45 335 8550
Segyung Britestone Co.
www.britestone.com
(82) 2 3218 1511
Serial Microelectronics, HK
www.serialsys.com.hk
(852) 2790 8220
World Peace Industries Co.
www.wpi-group.com
(852) 2365 4860
WT Microelectronics Co.
www.wtmec.com
(852) 2950 0820
Yosun Electronics
www.yosun.com.tw
(886) 2 2659 8168
For a comprehensive listing of
ON Semiconductor Sales Offices, Distributors,
and Rep Firms, please visit:
Americas & EMEA: www.onsemi.com/sales
China: www.onsemi.cn/sales
Japan: www.onsemi.jp/sales
Sep-15
AMERICAS REP FIRMS
Alabama
Brazil
California
Canada
Connecticut
Florida
Georgia
Illinois
Indiana
Iowa
Maine
Maryland
Massachusetts
Mexico
Michigan
Minnesota
Missouri
Nebraska
New Hampshire
New Jersey
New York
North Carolina
North Dakota
Ohio
Puerto Rico
Rhode Island
South Dakota
Vermont
Wisconsin
Huntsville
Countrywide
Bay Area
Southern California
Eastern Canada
Statewide
Statewide
Atlanta
Statewide
Fishers
Statewide
Statewide
Columbia
Statewide
Countrywide
St. Joseph
Eden Prairie
Belton
Statewide
Statewide
Statewide
Binghamton
Jericho
Rochester
Raleigh
Statewide
Brecksville
Countrywide
Statewide
Statewide
Statewide
Statewide
e-Components
Ammon & Rizos
Electec
Tech Coast Sales
Astec
Paragon Electronic Systems
e-Components
e-Components
Matrix – Design Technology
Bear VAI
Matrix – Design Technology
Paragon Electronic Systems
Mechtronics Sales
Paragon Electronic Systems
Ammon & Rizos
Bear VAI
Matrix – Design Technology
Matrix – Design Technology
Matrix – Design Technology
Paragon Electronic Systems
S.J. Metro
TriTech - Full Line Rep
S.J. Metro
TriTech - Full Line Rep
e-Components
Matrix – Design Technology
Bear VAI Technology
e-Components
Paragon Electronic Systems
Matrix – Design Technology
Paragon Electronic Systems
Matrix – Design Technology
(256) 533-2444
(+55) 11-4688-1960
(408) 496-0706
(949) 305-6869
(905) 607-1444
(603) 645-7630
(888) 468-2444
(888) 468-2444
(952) 400-1070
(317) 570-0707
(319) 362-6824
(603) 645-7630
(410) 309-9600
(603) 645-7630
(+55) 11-4688-1960
(440) 526-1991
(952) 400-1070
(816) 589-2308
(816) 589-2308
(603) 645-7630
(516) 942-3232
(607) 722-3580
(516) 942-3232
(585) 385-6500
(888) 468-2444
(952) 400-1070
(440) 526-1991
(888) 468-2444
(603) 645-7630
(952) 400-1070
(603) 645-7630
(952) 400-1070
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets,
and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty,
representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended
for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC
products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising
out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative
Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: [email protected]
BRD8079-5 PRINTED IN USA DDR
N. American Technical Support: 800-282-9855 Toll Free
USA/Canada.
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81-3-5817-1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
BRD8079/D
Similar pages