22 LEAD PDIP

MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
22 LEAD PDIP
CASE 708–04
ISSUE E
DATE 10/02/2000
SCALE 1:2
22
12
XXXXXXXXXXXXXX
XXXXXXXXXXXXXX
AWLYYWW
B
1
11
L
A
NC
K
H
NOTES:
1. CONTROLLING DIMENSION: INCH.
2. POSITIONAL TOLERANCE OF LEADS (D), SHALL
BE WITHIN 0.25 mm (0.010) AT MAXIMUM
MATERIAL CONDITION, IN RELATION TO
SEATING PLANE AND EACH OTHER.
3. DIMENSION L TO CENTER OF LEADS WHEN
FORMED PARALLEL.
4. DIMENSION B DOES NOT INCLUDE MOLD FLASH.
G
F
D
SEATING
PLANE
M
J
DIM
A
B
C
D
F
G
H
J
K
L
M
N
MILLIMETERS
MIN
MAX
27.56
28.32
8.64
9.14
3.94
5.08
0.36
0.56
1.27
1.78
2.54 BSC
1.02
1.52
0.20
0.38
2.92
3.43
10.16 BSC
0
15
0.51
1.02
INCHES
MIN
MAX
1.085
1.115
0.340
0.360
0.155
0.200
0.014
0.022
0.050
0.070
0.100 BSC
0.040
0.060
0.008
0.015
0.115
0.135
0.400 BSC
0
15 0.020
0.040
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
 Semiconductor Components Industries, LLC, 2000
October, 2000 – Rev. 04E
1
Case Outline Number:
708