Green 1310/1550 nm Micro-Optic WDM MWDMG1315 Series Product Description Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on thin-film filter technology and patented athermal platform for optical device. The MWDM1310/1550 is used to combine or separate 1310 and 1550 nm band signals. This device offers very flat and wide passband, low insertion loss, and high isolation, which make it ideal for Optical Amplification Systems and WDM Network applications. Oplink MWDM devices are Bellcore GR -1221 qualification tested and complied with industry green initiatives such as Rohs and WEEE. All Oplink products areepoxy-free in the optical path. Performance Specificationns MWDMG1315 Series Min Pass Channel Wavelength Range λ1 Reflection Channel Wavelength Range λ2 Typical Max Unit Type 1315 1260 1360 nm Type 1513 1520 1600 nm Type 1315 1520 1600 nm Type 1513 1260 1360 nm 0.6 0.6 dB Insertion Loss * Pass Channel @ λ1 Reflect Channel @ λ2 Isolation Reflect Channel @ λ1 Pass Channel @ λ2 15 40 dB Passband Ripple 0.30 dB Directivity 50 dB Return Loss 50 dB Features Environmental Green Plan Compliance Wide Operating Wavelength Range Compasct Size High Channel Isolation Ultra Low PDL and PMD Highly Stable & Reliable Epoxy-free Optical Path Polarization Dependent Loss 0.1 dB Applications Polarization Mode Dispersion 0.2 ps Bi-directional WDM Systems Maximum Power Handling 500 mW Fiber Type Corning SMF-28 Operating Temperature Storage Temperature Package Dimensions ** 250 μm Bare Fiber 900 μm Loose Tube Uni-directional WDM Systems System Monitoring 0 to +70 °C -40 to +85 °C P1: (ø) 5.5±0.2 x (L) 34.0±1 P2: (ø) 5.5±0.2 x (L) 40.0±1 mm Fiberoptic Instruments Transmistters & Fiber Laboratory R&D Note: * Values are referenced without connector loss. ** The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. S0027 - R04. (web) 20140113 Green 1310/1550 nm Micro-Optic WDM MWDMG1315 Series Mechanical Drawing / Package Dimensions (dimension in mm) P1: 250 µm bare fiber 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com P2: 900 µm loose tube Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. MWDMG 0 Wavelength 1310 nm pass = 1315 1550 nm pass = 1513 0 Fiber Length* 0.5 meter = H 1.0 meter = 1 1.5 meters = 5 2.0 meters = 2 Package & Fiber Jacket P1 + 250 μm bare fiber = 11 P2 + 900 μm loose tube = 22 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC/PC = 9 MU = A LC/APC = B * The tolerance of fiber length is +/-0.1m. (For connector option only, for without connector, just keep the length as minimum) * 1 meter is standard. The lead time for special fiber length will be longer. S0027 - R04. (web) 20140113 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Interconnect Transmission HFC/RoF Subsystem