MWDMG0050 S0026

Green (1480 nm Plus Supervisory)/
1550 nm Micro-Optic WDM
MWDMG0050 Series
Product Description
Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on
thin-film filter technology and patented athermal platform for optical device. The
MWDM device is used to combine (or separate) 1550 nm signals with (or from) a
1480 nm pump signal plus the1510 nm supervisory channel.This device offers very
flat and wide passband, low insertion loss, and high isolation which makes it ideal
for amplification, telecommunications and WDM network applications. Oplink
MWDM devices are Bellcore GR-1221 qualification tested and complied with
industry green initiatives such as Rohs and WEEE. All Oplink products are epoxyfree in the optical path.
Features
Performance Specificationns
MWDMG0050 Series
Min
Pass Channel Wavelength Range λ1
Reflection Channel Wavelength Range λ2
Insertion Loss *
Pass Channel @ λ1
Reflect Channel @ λ2
Isolation
Reflect Channel @ λ1
Pass Channel @ λ2
Typical
Max
Unit
1465
1515
nm
1540
1575
nm
0.7
0.5
dB
12
30
dB
Passband Ripple
0.30
dB
Directivity
50
dB
Return Loss
50
dB
Polarization Dependent Loss
0.1
dB
Polarization Mode Dispersion
0.05
ps
Maximum Power Handling
500
mW
Fiber Type
Corning SMF-28
Operating Temperature
Storage Temperature
Package Dimensions **
250 μm Bare Fiber
900 μm Loose Tube
 Environmental Green Plan
Compliance
 Wide Operating Wavelength Range
 Low Insertion Loss
 High Channel Isolation
 Ultra Flat Wide Passband
 Highly Stable & Reliable
 Epoxy-free Optical Path
Applications
 Fiberoptic Amplifiers
 System Monitoring
0 to +70
°C
 Fiberoptic Instruments
-40 to +85
°C
P1: (ø) 5.5 x (L) 34.0
P2: (ø) 5.5 x (L) 40.0
 Laboratory R&D
mm
Note:
* Values are referenced without connector loss.
** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified.
S0026 - R03. 20100602
Green (1480nm Plus Supervisory)/
1550nm Micro-Optic WDM
MWDMG0050 Series
Mechanical Drawing / Package Dimensions (dimension in mm)
P1: 250 µm bare fiber
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com
P2: 900 µm loose tube
Ordering Information
Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM
design team or account manager for your requirements and ordering information (510) 933-7200.
MWDMG
0
0
5
0
Wavelength
1500 nm pass = 0050
0
0
Fiber Length*
0.5 meter = H
1.0 meter = 1
1.5 meters = 5
2.0 meters = 2
Package & Fiber Jacket
P1 + 250 μm bare fiber = 11
P2 + 900 μm loose tube = 22
Connector Type
None = 1
FC/PC = 2
FC/SPC = 3
FC/APC = 4
SC/PC = 5
SC/SPC = 6
SC/APC = 7
ST = 8
LC = 9
MU = A
* The tolerance of fiber length is +/-0.1m. 1 meter is standard.
The lead-time for special fiber length will be longer.
S0026 - R03. 20100602
Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules