Green C Band Supervisory Channel (1500-1520 nm) Micro-Optic WDM MWDMGCSU Series Product Description Oplink’s Micro-Optic Wavelength Division Multiplexer (MWDM) is based on thin-film filter technology and patented athermal platform for optical device. MWDM-SU is used to add or drop supervisory channels. is device offers very flat and wide passband, low insertion loss, and high isolation, which make it ideal for high-power Optical Amplification Systems and DWDM Network applications. Oplink MWDM devices are Bellcore GR-1221 qualification tested and complied with industry green initiatives such as Rohs and WEEE. All Oplink products are epoxy-free in the optical path. Performance Specificationns MWDMGCSU Series Min Pass Channel Wavelength Range λ1 Reflection Channel Wavelength Range λ2 Insertion Loss * Pass Channel @ λ1 Reflect Channel @ λ2 Isolation Reflect Channel @ λ1 Pass Channel @ λ2 Typical Max Unit 1500 1520 nm 1530 1563 nm 0.8 0.6 dB 12 30 dB Passband Ripple 0.3 dB Directivity 50 dB Return Loss 50 dB Polarization Dependent Loss 0.1 dB Polarization Mode Dispersion 0.05 ps Maximum Power Handling 500 mW Fiber Type Corning SMF-28 Operating Temperature Storage Temperature Package Dimensions ** 250 μm bare ber 900 μm loose tube Features Environmental Green Plan Compliance Wide Operating Wavelength Range Low Insertion Loss High Channel Isolation Ultra Flat Wide Passband Highly Stable & Reliable Epoxy-free Optical Path Applications Fiberoptic Amplifiers 0 to +70 °C System Monitoring -40 to +85 °C Fiberoptic Instruments P1: (ø) 5.5 (±0.2) x (L) 34.0 (±1) P2: (ø) 5.5 (±0.2) x (L) 40.0 (±1) mm Laboratory R&D Note: * Values are referenced without connector loss. ** The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. S0032 - R04. (web) 20130520 Green C Band Supervisory Channel (1500-1520 nm) Micro-Optic WDM MWDMGCSU Series Mechanical Drawing / Package Dimensions (dimension in mm) P1: SMF-28 250 µm bare fiber 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com P2: 900 µm loose tube Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. MWDMG C S U 0 0 0 Wavelength Fiber Length* 1500~1520 nm pass = CSU 0.5 meter = H 1.0 meter = 1 1.5 meters = 5 2.0 meters = 2 Package & Fiber Jacket P1 + 250 μm bare fiber = 11 P2 + 900 μm loose tube = 22 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC/PC = 9 MU = A LC/APC = B * The tolerance of fiber length is +/-0.1m (for connector option only, for without connector, just keep the length as minimum). 1 meter is standard. The lead-time for special fiber length will be longer. S0032 - R04. (web) 20130520 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Interconnect Transmission HFC/RoF Subsystem