INTERSIL ISL88042IRTHFZ-T

ISL88042
®
Data Sheet
July 26, 2010
FN6655.2
Quadruple Voltage Monitor
Features
The ISL88042 is a Quadruple voltage-monitoring supervisor
combining competitive reset threshold accuracy and low
power consumption. This device combines popular functions
such as Power-On Reset, Undervoltage Supply Supervision,
reset signaling and Manual Reset. Monitoring four different
supplies in a 8 Ld 2x3 TDFN package, the ISL88042 devices
can help to lower system cost, reduce board space
requirements, and increase the reliability of multi-voltage
systems.
• Quadruple Voltage Monitoring
Low VDD detection circuitry protects the user’s system from
low voltage conditions, resetting the system when VDD or
any of the other monitored power supply voltages fall below
their respective minimum voltage thresholds. The reset
signal remains asserted until all of these voltages return to
proper operating levels and stabilize.
• Immune to Power-Supply Transients
Two of the four voltage monitors have preset thresholds for
either dual 3.3V or one each for one 5V and one 3.3V
supplies. Users can adjust the threshold voltages of the third
and fourth voltage monitors in order to meet specific system
level requirements.
• Telecom and Datacom Systems
Pinout
• Desktop and Notebook Computer Systems
• Fixed-Voltage Options Allow Precise Monitoring of +5.0V
and +3.3V Power Supplies
• Two Adjustable Voltage Inputs Monitor Voltages > 0.6V
• 95ms Nominal Reset Pulse Width
• Manual Reset Capability
• Reset Signals Valid Down to VDD = 1V
• Low 22µA Maximum Supply Current at 5V
• Pb-Free (RoHS Compliant)
Applications
• Routers and Servers
• Access Concentrators
• Cable/Satellite Applications
• Data Storage Equipment
ISL88042
(8 LD TDFN)
TOP VIEW
MR
1
VDD
2
V2MON
3
GND
4
EPAD
(GND)
• Set-Top Boxes
• Industrial Equipment
8
RST
7
VDDA
6
V4MON
5
V3MON
• Multi-Voltage Systems
Ordering Information
PART NUMBER
(Notes 1, 2)
PART
MARKING
VTH1
(V)
VTH2
(V)
TEMP RANGE
(°C)
PACKAGE
Tape & Reel
(Pb-free)
PKG.
DWG. #
ISL88042IRTHFZ-T
4P6
4.60
3.09
-40 to +85
8 Ld TDFN
L8.2x3A
ISL88042IRTHFZ-TK
4P6
4.60
3.09
-40 to +85
8 Ld TDFN
L8.2x3A
ISL88042IRTEEZ-T
2P9
2.87
2.95
-40 to +85
8 Ld TDFN
L8.2x3A
ISL88042IRTEEZ-TK
2P9
2.87
2.95
-40 to +85
8 Ld TDFN
L8.2x3A
ISL88042IRTJJZ-T
2P8
2.78
2.86
-40 to +85
8 Ld TDFN
L8.2x3A
ISL88042IRTJJZ-TK
2P8
2.78
2.86
-40 to +85
8 Ld TDFN
L8.2x3A
NOTES:
1. Please refer to TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate
plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2008, 2009, 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
ISL88042
Pin Descriptions
ISL88042
PIN NUMBER
PIN NAME
1
MR
Active-Low open drain manual reset input with internal pull-up resistor
2
VDD
Chip Bias Input and primary integrated preset undervoltage monitor
3
V2MON
4
GND
5
V3MON
Adjustable undervoltage monitor input
6
V4MON
Adjustable undervoltage monitor input
7
VDDA
Must be tied to VDD for proper operation
8
RST
Active-low open drain reset output
FUNCTION
Secondary integrated preset undervoltage monitor input
Ground
Functional Block Diagram
VDD
MR
POR
PB
¬ VREF
RST
tPOR
V2MON
V4MON
¬ VREF
VREF
¬
V3MON
GND
2
VREF ¬
FN6655.2
July 26, 2010
ISL88042
Absolute Maximum Ratings
Thermal Information
Temperature Under Bias . . . . . . . . . . . . . . . . . . . . .-40°C to +125°C
Voltage on VDD with Respect to GND. . . . . . . . . . . . . . -1.0V to +7V
Voltage on V3MON, V4MON . . . . . . . . . . . . . . . . . . . . . . -1.0V to 3V
Voltage on Any Other Pin. . . . . . . . . . . . . . . . . -1.0V to VDD + 0.3V
DC Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5mA
Thermal Resistance (Typical)
θJA (°C/W)
θJC (°C/W)
8 Ld TDFN Package (Notes 3, 4). . . . .
60
8
Pb-free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Operating Temperature Range (Industrial) . . . . . . . .-40°C to +85°C
Storage Temperature Range . . . . . . . . . . . . . . . . . .-65°C to +150°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTE:
3. θJA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
4. For θJC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications
SYMBOL
Over the recommended operating conditions, unless otherwise specified.
PARAMETER
TEST CONDITIONS
MIN
(Note 5)
TYP
MAX
(Note 5)
UNITS
5.5
V
VDD
Supply Voltage Range
IDD1
VDD Supply Current
VDD = 5.0V
14
22
µA
IDD2
V2MON Input Current
V2MON = 3.3V
5.5
8
µA
IDDA
V3MON, V4MON Input Current
V3MON, V4MON = 1.0V
19
100
nA
2.0
VOLTAGE THRESHOLDS
VTH1
VTH1HYST
VTH2
VTH2HYST
Fixed Voltage Trip Point for VDD
Hysteresis of VTH1
Fixed Voltage Trip Point for V2MON
Hysteresis of VTH2
ISL88042IRTHFZ
4.370
4.600
4.830
V
ISL88042IRTEEZ
2.734
2.872
3.010
V
ISL88042IRTJJZ
2.647
2.780
2.914
V
VTH1 = 4.60V
92
mV
VTH1 = 2.87V
58
mV
VTH1 = 2.78V
58
mV
ISL88042IRTHFZ
2.936
3.090
3.245
V
ISL88042IRTEEZ
2.815
2.957
3.099
V
ISL88042IRTJJZ
2.725
2.860
3.000
V
VTH2 = 3.09V
61
mV
VTH2 = 2.96V
60
mV
VTH2 = 2.86V
60
VREF
ISL88042IRTHFZ, ISL88042IRTEEZ
Adj. Reset Threshold Voltage
VTH for V3MON, V4MON
0.572
0.600
0.630
V
VREF
ISL88042IRTJJZ Adj. Reset Threshold Voltage VTH for V3MON, V4MON
0.554
0.581
0.610
V
VREFHYST
Hysteresis Voltage
12
mV
RESET
VOL
Reset Output Voltage Low
tRPD
VTH to Reset Asserted Delay
tPOR
POR Timeout Delay
3
VDD ≥ 3.3V, Sinking 2.5mA
0.05
0.40
V
VDD < 3.3V, Sinking 1.5mA
0.05
0.40
V
6
V3MON, V4MON < 3V
40
95
µs
150
ms
FN6655.2
July 26, 2010
ISL88042
Electrical Specifications
SYMBOL
Over the recommended operating conditions, unless otherwise specified. (Continued)
PARAMETER
MIN
(Note 5)
TEST CONDITIONS
TYP
MAX
(Note 5)
UNITS
0.8
V
MANUAL RESET
VMRL
MR Input Voltage Low
VMRH
MR Input Voltage High
tMR
MR Minimum Pulse Width
RPU
Internal Pull-Up Resistor
VDD - 0.6
V
550
ns
10
kΩ
NOTE:
5. Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified. Temperature limits established by characterization
and are not production tested.
Pin Descriptions
.
RST
VDD
RST
The RST output is an open drain output, which is asserted
low whenever the following occurs:
V2MON
MR
1. The device is initially powered up to 1V or
2. VDD, V2MON, V3MON or V4MON fall below their
minimum voltage sense level.
MR
ISL88042
V3MON
PB
RESET
SIGNAL
V4MON
The MR input is an active low debounced input to which a
user can connect a push-button to add manual reset
capability or use a signal to pull low. MR has an internal
pull-up resistor.
VDD
The VDD pin is the IC power supply terminal. The voltage at
this pin is compared against an internal factory-programmed
voltage trip point, VTH1. RST is first asserted low when the
device is initially powered and VDD < 1V and then at any
time thereafter when VDD falls below VTH1. The device is
designed with hysteresis to help prevent chattering due to
noise and is immune to brief power-supply transients.
V2MON
The V2MON input is the second preset monitored voltage
that causes the RST output to go low when the voltage on
V2MON falls below VTH2.
V3MON, and V4MON
The VxMON inputs provide monitoring and UV compliance
of three additional voltages through resistor dividers. A reset
is issued on the ISL88042 if the voltage on any VxMON falls
below the internal VREF of 0.6V.
GND
FIGURE 1. TYPICAL APPLICATION DIAGRAM
Principles of Operation
The ISL88042 device provides those functions needed for
monitoring critical voltages, such as power-supply and battery
functions in microprocessor systems. It provides such features
as Power-On Reset control, supply voltage supervision, and
Manual Reset Assertion. The integration of all these features
along with competitive reset threshold accuracy and low power
consumption, makes the ISL88042 device suitable for a wide
variety of applications needing multi-voltage monitoring. See
Figure 1 for the “Typical Application Diagram”.
Low Voltage Monitoring
During normal operation, the ISL88042 monitors the voltage
levels of VDD, V2MON, V3MON and V4MON. If the voltage on
any of these four inputs falls below their respective voltage trip
points, a reset is asserted (RST = low) to prevent the
microprocessor from operating during a power failure or
brownout condition. This reset signal remains low until the
voltages exceeds the voltage threshold settings for the reset
time delay period tPOR.
The ISL88042 allows users to customize the minimum voltage
sense level for two of the four monitored voltages. For example,
the user can adjust the voltage input trip point (VTRIP) for the
V3MON and V4MON inputs. To do this, connect an external
resistor divider network to the VxMON pin in order to set the trip
4
FN6655.2
July 26, 2010
ISL88042
point to some other voltage above 600mV according to
Equation 1:
V TRIP = 0.6V × R 1 + R 2 / R 2
(EQ. 1)
The reset signal remains active until VDD rises above the
minimum voltage sense level for time period tPOR. This
ensures that the supply voltage has stabilized to sufficient
operating levels.
Power-On Reset (POR)
Manual Reset
Applying power to the ISL88042 activates a POR circuit, which
makes the reset pin(s) active (i.e. RST goes high while RST
goes low). These signals provide several benefits:
The manual-reset input (MR) allows the user to trigger a reset
by using a push-button switch or by signaling the input low. The
MR input is an active low debounced input. Reset is asserted if
the MR pin is pulled low to less than 100mV for the minimum
MR pulse width or longer while the push-button is closed. After
MR is released, the reset output remains asserted low for tPOR
(200ms) and then is released.
• They prevent the system microprocessor from starting to
operate with insufficient voltage.
• They prevent the processor from operating prior to
stabilization of the oscillator.
Figures 2 and 3 illustrate the ISL88042’s operation.
• They ensure that the monitored device is held out of
operation until internal registers are properly loaded.
• They allow time for an FPGA to download its configuration
prior to initialization of the circuit.
VTH1/VTH2
VDD /
V2MON
1V
>tMR
MR
tPOR
tRPD
tPOR
tPOR
RST
>tMD
FIGURE 2. POWER SUPPLY MONITORING DIAGRAM
VXMON
VTH
tRPD
tPOR
RST
FIGURE 3. VOLTAGE MONITORING DIAGRAM
5
FN6655.2
July 26, 2010
ISL88042
The ISL88042EVAL1Z and Applications
Special Application Considerations
The ISL88042EVAL1Z supports all variants of the ISL88042
devices, enabling evaluation of basic functional operation and
common application implementations. Figure 10 illustrates the
ISL88042EVAL1Z in schematic and photographic forms. The
ISL88042EVAL1Z is populated with the ISL88042IRTEEZ
(VDD VTH1 and V2MON VTH2 = 2.90V).
Using good decoupling practices on bias and other
monitoring inputs will prevent transients (i.e. due to switching
noises and short duration droops in the supply voltage) from
causing unwanted resets.
With adequate bias on the two preset and the two adjustable
monitor inputs the RST output will release to pull high
indicating that all supplies are compliant for a minimum of
tPOR. For the ISL88042EVAL1Z as shipped, the VDD and
V2MON nominal thresholds are as previously noted with the
voltage thresholds being monitored by V3MON and V4MON
being left open for programming via the non populated
resistor dividers.
In unusually noisy environments or situations where
unwanted signals may be injected into the adjustable VMON
inputs, lowering the node impedance and/or positioning a
small valued filter capacitor as close to the pin as possible
can increase noise immunity.
Although the internal ISL88042 threshold references are
guaranteed over the full temp range, accuracy errors due to
external component tolerances and distribution losses will
occur. High tolerance resistors and layout for extreme
accuracy and critical performance must be considered.
Typical Performance Curves
ISL88042IRTHF VDD
3.10
3.05
ISL88042IRTHF V2MON
3.00
ISL88042IRTEE V2MON
2.80
ISL88042IRTJJ V2MON
2.75
ISL88042IRTJJ VDD
-40
-20
0
4.59
605
4.58
600
4.56
ISL88042IRTEE VDD
2.85
2.70
610
4.57
2.95
2.90
4.60
25
50
85
TEMPERATURE (°)
4.55
100
125
590
575
4.53
570
BIAS CURRENT (µA)
14
95
90
85
80
ISL88042IRTJJ V3MON
-40
-20
0
25
50
85
TEMPERATURE (°C)
100
125
FIGURE 5. V3MON and V4MON Vth vs TEMPERATURE
16
100
ISL88042IRTJJ V4MON
580
115
105
ISL88042IRTHF ISL88042IRTEE V3MON
585
120
110
ISL88042IRTHF ISL88042IRTEE V4MON
595
4.54
FIGURE 4. VDD and V2MON Vth vs TEMPERATURE
tPOR (ms)
VXMON Vth (mV)
VDD & V2MON Vth (V)
3.20
3.15
VDD = 5V
12
10
8
6
4
V2MON = 3.3V
2
-40
-20
0
25
50
85
TEMPERATURE (°C)
100
FIGURE 6. tpor vs TEMPERATURE
6
125
0
-40
-20
0
25
50
85
TEMPERATURE (°C)
100
125
FIGURE 7. BIAS CURRENT vs TEMPERATURE
FN6655.2
July 26, 2010
ISL88042
Typical Performance Curves
RST
1V/DIV
RST
1V/DIV
tRPD = 4.3µs
tPOR = 94ms
VMON = 0.5V/DIV
VMON = 0.5V/DIV
20ms/DIV
1µs/DI
FIGURE 9. ISL88042 tPOR
FIGURE 8. ISL88042 tRPD
VDD
MRST
A
MR
RST
VDD
VDD
R2
10k
U1
RST
C1
OPEN
V2MON
AGND
A
V2MON
V4MON
GND
V3MON
V4MON
R5
OPEN R3
OPEN
V4
V3
V3MON
ISL88042
R4
OPEN
R6
OPEN
A
FIGURE 10. ISL88042EVAL1Z SCHEMATIC AND PHOTOGRAPH
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
7
FN6655.2
July 26, 2010
ISL88042
Package Outline Drawing
L8.2x3A
8 LEAD THIN DUAL FLAT NO-LEAD PLASTIC PACKAGE WITH E-PAD
Rev 1, 06/09
0.25
B
0.50
2.20
6
PIN 1
INDEX AREA
(4X)
6
PIN #1 INDEX AREA
3.00
A
1.80 +0.1/ -0.15
2.00
0.15
(8x0.40)
1.65 +0.1/ -0.15
TOP VIEW
BOTTOM VIEW
(8x0.25)
PACKAGE
OUTLINE
(6x0.50)
0.75
SEE DETAIL "X"
SIDE VIEW
1.80
3.00
0.05
(8x0.40)
1.65
C
0.20 REF
C
BASE PLANE
SEATING PLANE
0.08 C
5
(8x0.20)
0.05
2.00
TYPICAL RECOMMENDED LAND PATTERN
DETAIL "X"
NOTES:
1.
Dimensions are in millimeters.
Dimensions in ( ) for Reference Only.
2.
Dimensioning and tolerancing conform to AMSE Y14.5m-1994.
3.
Unless otherwise specified, tolerance : Decimal ± 0.05
4.
Dimension b applies to the metallized terminal and is measured
between 0.20mm and 0.32mm from the terminal tip.
5.
Tiebar shown (if present) is a non-functional feature.
6.
The configuration of the pin #1 identifier is optional, but must be
located within the zone indicated. The pin #1 indentifier may be
either a mold or mark feature.
8
FN6655.2
July 26, 2010