Air to Air Thermoelectric Assembly ATS PART# ATS-FF-150W-24-C ATS’ air to air thermoelectric assemblies are heat exchangers that remove heat from an enclosure and are designed for temperature regulation of small electronic cabinets or enclosures. They are often used when it is better to circulate cooled air rather than use direct contact with a cold plate. FEATURES & BENEFITS » Compact and lightweight » Simple quick installation » Can be mounted in any orientation » Air to air heat exchanger » No compressor » Quiet operation » Virtually maintenance free » Uses thermoelectrics SPECIFICATION Max Cooling power TEC Voltage TEC Current Fan Voltage 90W @ ∆T = 0°C 24 VDC Start 9.5 A / Working 8.2 A 24 VDC Illustration Purposes ONLY. APPLICATIONS » Enclosure or cabinet cooling » Electronics cooling » Medical, surgical and biological process » Thermal management » Medical equipment » Refrigerators and water coolers » Industrial storage and food transportation Product Detail Max Cooling TEC TEC Power Voltage Current 90W 24V 8.2A Hot Side Fan Cold Side Fan 120x120x38 mm 120x120x38 mm 24V, 0.25A 24V, 0.25A Operating Temperature Dimensions (mm) Mounting Holes (mm) Weight -10° – 70° 300x160x170.1 200x145 4.5Kgs NOTES: 1. 2. 3. 4. 5. 6. Please use the 24 VDC power supply with the ripple less than 10% Please do not drop, otherwise TECs can get damaged. Please keep 10 cm distance from walls for proper ventilation when mounting. Please do not use when the temperature of the assembly or environment is higher than 70°C. Graph shows an example of when cabinet temperature is 50°C and the environment temp is 50°C, the cooler can transfer 90W from the cabinet to the ambient. ∆T = Tenclosure - Tambient 89-27 ACCESS ROAD, NORWOOD, MA 02062 USA | T: 781.769. 2800 F: 781.769.9979 | WWW.QATS.COM