ILSI I747-5O2

I547/I747 Series
2.5 mm x 3.2 mm Ceramic Package SMD TCXO
Product Features:
Applications:
Low Jitter, Non-PLL Based Output
Clipped Sinewave
Analog Compensation
Available  0.5 ppm Stability
3.20
GPS
Sonet /SDH
802.11 / Wifi
T1/E1, T3/E3
10Mhz to 52 Mhz
GPS Frequencies
16.396Mhz, 16.3676Mhz, 16.367667Mhz, 19.200Mhz,
24.5535Mhz, 26.000Mhz
 1.5 ppm
Frequency Stability
Vs Temperature
Vs Supply Voltage ( 5%)
Vs Load(10%)
Output Level
Clipped Sinewave
Output Load
Clipped Sinewave
10K Ohms / 10 pF
Duty Cycle (HCMOS)
50% ±10%
Frequency Slope
(2C steps from -20 C to +70 C)
Start Time (90% of Vp-p)
 0.1 ppm / C
3.0 mS Max.
Aging
 1 ppm / Year Max.
Supply Voltage
See Supply Voltage Table , tolerance  5%
Current
1.5 mA Max
Voltage Control
(I747)
Operating
1.5 VDC  1.0 VDC,  5.0 ppm Min.
Storage
-40 C to +85 C
Phase Noise
-87 dBc/Hz @ 10 Hz
-112 dBc/Hz @ 100 Hz
-135 dBc/Hz @ 1KHz
-145 dBc/Hz @ 10 Khz
I547 (Clipped Sinewave TCXO)
I747 (Clipped Sinewave TCVCXO)
2
0.10
0.8 V p-p Min.
1
2
4
3
0.10
Recommended Pad Layout
2.40
4
3
1
2
2.0
1.3
0.9
Pin
1
2
3
4
Connection
Vcontrol / N.C.
GND
Output
Vcc
Dimension Units: mm
Sample Part Number: I547-1Q3-20.000 Mhz
FrequencyStability vs Temperature
Supply Voltage
**Y = 0.5 ppm
3 = 3.3 V
1 = 0 C to +70 C
**N = 1.0 ppm
7 = 3.0 V
3 = -20 C to +70 C
**O = 1.5 ppm
2 = 2.7 V
5 = -30 C to +85 C
**P = 2.0 ppm
1 = 1.8 V
2 = -40 C to +85 C
Q = 2.5 ppm
R = 3.0 ppm
J = 5.0 ppm
NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 4) and GND (pin 2) to minimize power supply noise.
** Not available for all temperature ranges.
ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com
8/09/11_E
0.65 +/-0.02
0.62 +/-0.02
Part Number Guide
Operating Temperature
7 = 0 C to +50 C
1
1.2 Max.
See Frequency Stability Table
 0.1 ppm Max.
.0.2 ppm Max.
See Operating Temperature Table
Package
3
2.50
Frequency
Frequency Tolerance @ 25 C
4
Specifications subject to change without notice
Page 1
Frequency
- 20.000 MHz
I547/I747 Series
2.5 mm x 3.2 mm Ceramic Package SMD TCXO
Pb Free Solder Reflow Profile:
Typical Application:
*Units are backward compatible with 240C reflow processes
Package Information:
MSL = N.A. (package does not contain plastic, storage life is
unlimited under normal room conditions).
Termination = e4 (Au over Ni over W base metalization).
Tape and Reel Information:
Quantity per
Reel
A
B
C
D
E
F
1000
8 +/-.3
4 +/-.2
3.5 +/-.2
9 +/-1 or 12 +/-3
60 / 80
180
Environmental Specifications
Thermal Shock
Moisture Resistance
Mechanical Shock
Mechanical Vibration
Resistance to Soldering Heat
Hazardous Substance
Solderability
Terminal Strength
Gross Leak
Fine Leak
Solvent Resistance
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2007, Condition A
J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max)
Pb-Free / RoHS / Green Compliant
JESD22-B102-D Method 2 (Preconditioning E)
MIL-STD-883, Method 2004, Test Condition D
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s
MIL-STD-202, Method 215
Marking
Line 1: I - Date Code (YWW)
Line 2: Frequency
ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com
8/09/11_E
Specifications subject to change without notice
Page 2