1047

SHD114211
SHD114211A
SHD114211B
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 1047, REV. A
POWER SCHOTTKY RECTIFIER
Very Low Voltage Drop
(S-100 for JANTXV equivalent screening; SS for JANS equivalent screening available)
DESCRIPTION: A 30 VOLT, 15 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-3/3A/3B PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
PEAK INVERSE VOLTAGE
O
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C)
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT
SYMBOL
MAX.
UNITS
PIV
30
Volts
IO
15
Amps
IFSM
280
Amps
CT
1100
pF
1.7
C/W
Top/Tstg
-65 to
+ 150
C
SYMBOL
MAX.
UNITS
Vf
0.49
Volts
Ir
2.0
(t=8.3ms, Sine)
MAXIMUM JUNCTION CAPACITANCE
(Vr =5V)
MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode)
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
R
JC
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 15 Amps)
TJ = 25 C
TJ = 125 C
0.39
MAXIMUM REVERSE CURRENT (Ir @ 30V PIV)
TJ = 25 C
TJ = 125 C
mA
100
©2012 Sensitron Semiconductor 221 West Industry Court  Deer Park, NY 11729-4681
 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
SHD114211
SHD114211A
SHD114211B
SENSITRON
DATA SHEET 1047, REV. A
MECHANICAL DIMENSIONS: In Inches / mm
.560±.020
.550±.020
(14.0±.508)
.410±.010
(10.4±.254)
(14.2±.508)
.410±.010
(10.4±.254)
.410±.010
(10.4±.254)
.410±.010
(10.4±.254)
.410±.010
(10.4±.254)
.075 (1.91) Max
.200±.010
(5.08 ±.254)
.410±.010
(10.4±.254)
.015±.005
(.381±.127)
Copper Anode
.020±.005 R
(.508±.127 )
Moly Lid
.150±.010
(3.81±.254)
.020±.005 R
.090 (2.29) Max
Alumina Ring
.075 (1.91) Max
Moly Lid
(.508±.127 )
Alumina Ring
Alumina Ring
.020±.002
(.508±.051)
Moly Bas e
(Cathode)
.015±.002
(.381±.051)
Moly Base
.060±.010
(1.52±.254)
Moly Anode
(Cathode)
Moly Bas e
.060±.010
SHD-3
SHD-3A
PINOUT TABLE
TYPE
SINGLE RECTIFIER
SHD-3B
PIN 1 (Base)
CATHODE
Typical Forward Characteristics
PIN 2
ANODE
Typical Reverse Characteristics
Instantaneous Reverse Current - I R (mA)
102
150 °C
101
150 °C
125 °C
101
100 °C
100
75 °C
50 °C
10-1
25 °C
10-2
125 °C
100
0
10-1
0.0
0.1
0.2
0.3
0.4
0.5
Forward Voltage Drop -FV(V)
10
20
30
Reverse Voltage - RV (V)
40
Typical Junction Capacitance
25 °C
0.6
Junction Capacitance - C T (pF)
Instantaneous Forward Current - I F (A)
(1.52±.254)
1000
900
800
700
600
0
10
20
30
Reverse Voltage - RV (V)
40
©2012 Sensitron Semiconductor 221 West Industry Court  Deer Park, NY 11729-4681
 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
SHD114211
SHD114211A
SHD114211B
SENSITRON
DATA SHEET 1047, REV. A
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©2012 Sensitron Semiconductor 221 West Industry Court  Deer Park, NY 11729-4681
 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
Similar pages