Download

Nano Module Multi125
125kHz Contactless Reader/Writer
Elatec’s Nano Module Multi125 is designed for integration into machines, handheld computer or any other device.
The focus is set especially on size, price and flexibility.
Thanks to its compact dimensions an integration directly on a PC board is possible.
Following special features:
 Support for many different transponder types.
 Five configurable I/Os.
 Transponder operation can be triggered externally.
Elatec GmbH
Lilienthalstr. 3
82178 Puchheim
Germany
Phone:
Fax:
+49 89 5529961 0
+49 89 5529961 29
[email protected]
www.elatec-rfid.com
Technical Data
Housing
Frequency
Dimensions (L x W x H)
Power Supply
Current Consumption
Temperature Range
Relative Humidity
Antenna
Read- / Write Distance
Supported
Transponders
Certification
Weight
Order Code
without
125kHz+/- 0.5%
20,32 mm x 20,32 mm x 5,35mm / 0.80inch x 0.80inch x 0.21inch
5.0 V DC+/- 5%
RF field off:
15mA
RF field on:
typically 75mA, depending on antenna
Operating: -25°C up to +80°C (-13°F up to +176°F)
Storage: -40°C up to +85°C (-40°F up to +185°F)
5% to 95% non-condensing
To be connected externally (490 µH)
Proximity, depending on antenna and tag
 EM4102, EM4105, EM4150, EM4200
 EM4350, EM4450
 FDX-B
 HITAG 1 , HITAG 2
 HITAG S
 MIRO
 Q5
 T5557,T5567, T5577
 TITAN, UNIQUE, ZOODIAC
RoHS compliant
Approx. 2g
ART10414
Pinning
Schematically picture (component side)
Pin spacing 2,54mm
Pin
1
2
3
Name
GND
VCC
RXD-
4
TXD-
5…7
8
9
10
11
IO1
IO2
IO3
RESANT1
ANT2
ANTC
12…13
IO4 IO5
14…16
PD PC PP
Description
Ground
+5V +/- 5%, max. 75mA
Data input, TTL-Level
(low active)
Data output, TTL-Level
(low active)
Free programmable I/O, e.g. for
LEDs or loudspeakers
RESET (low active)
Antenna connector
Antenna connector
Tuning capacitor for antenna;
(second pin is ANT1)
Free programmable I/O, e.g. for
LEDs or loudspeakers
for internal use
Elatec reserves the right to change any information or data in this document without prior notice. The distribution and the update of this document is not controlled. Elatec declines all responsibility for
the use of product with any other specifications but the ones mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own
responsibility. Where application information is given, it is only advisory and does not form part of the specification
© 2011 Elatec GmbH – V2.0 – 01/2011
Elatec GmbH
Lilienthalstr. 3
82178 Puchheim
Germany
Phone:
Fax:
+49 89 5529961 0
+49 89 5529961 29
[email protected]
www.elatec-rfid.com
Similar pages