MAAM-009286 RF Driver Amplifier 250 - 4000 MHz Rev. V1 Functional Schematic Features • • • • • • +42 dBm Output IP3 Broadband Operation Lead-Free SOT-89 Package Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible Class 2 ESD Rating Description The MAAM-009286 RF driver amplifier is a GaAs MMIC which exhibits exceptional linearity, as well as high gain in a lead-free SOT-89 surface mount plastic package. Broadband operation over the 250 to 4000 MHz range is achieved using external matching components as shown in the PCB layout. Different component values may be needed to optimize performance at different center frequencies. The device is biased with a single +5 volt supply and consumes 155 mA typically. The MAAM-009286 is fabricated using an HBT process to realize low current and high linearity. The process features full passivation for increased performance and reliability. Ordering Information1,2 Part Number Package MAAM-009286-000000 Bulk Packaging MAAM-009286-TR3000 3000 piece reel MAAM-009286-001SMB Sample Board Pin 1 RF In RF Out / Bias Pin Configuration Pin No. Function Pin No. Function 1 RF Input 3 RF Output/Bias 2 Ground Maximum Operating Conditions3 Parameter Maximum Operating Conditions Junction Temperature 4 170°C RF Output Power 27 dBm Operating Temperature -40°C to +85°C 3. These operating conditions will ensure MTTF > 1 x 106 hours. 4. Junction Temperature (TJ) = TA + Өjc * ((V * I) - (POUT - PIN)) Typical thermal resistance (Өjc) = 70° C/W a) For TA = 25°C, TJ = 76 °C @ 5 V, 170 mA, POUT = 21 dBm, PIN = 5.5 dBm b) For TA = 85°C, TJ = 125 °C @ 5 V, 140 mA, POUT = 21 dBm, PIN = 6.2 dBm Absolute Maximum Ratings5,6 Parameter Absolute Maximum RF Output Power 28 dBm Voltage 6 volts Storage Temperature -65°C to +150°C Junction Temperature 210°C 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. M/A-COM Technology does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAM-009286 RF Driver Amplifier 250 - 4000 MHz Rev. V1 Electrical Specifications: Freq. = 2140 MHz, TA = +25°C, VCC = +5 V, Z0 = 50 Ω Parameter Units Min. Typ. Max. Gain dB 14 15.5 — Noise Figure dB — 3.5 — Input Return Loss dB — 11 — Output Return Loss dB — 13 — Output P1dB dBm — 27 — Output IP3 PIN = -6 dBm / tone, 1 MHz spacing dBm 40 42 — Quiescent Current mA — 155 — Current (PIN = -3 dBm) mA — 155 225 2140 MHz PCB Layout 2140 MHz Schematic Parts List Part Value Case Style C1 12 pF 0402 C2 2.2 pF 0402 C3 0.1 µF 0402 C4 1000 pF 0402 C5 39 pF 0402 C6 1.2 pF 0402 L1 7.5 nH 0402 R1, R2 0Ω 0402 Cross Section View The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50 Ω lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of 0.008” (0.20 mm) yielding a 50 Ω line width of 0.015” (0.38 mm). The recommended RF metalization is 1 ounce copper. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAM-009286 RF Driver Amplifier 250 - 4000 MHz Rev. V1 Typical Performance Curves, 2140 MHz Configuration Gain Input Return Loss 20 0 +25°C -40°C +85°C 18 +25°C -40°C +85°C -5 16 -10 14 -15 12 10 2.00 2.05 2.10 2.15 2.20 2.25 2.30 -20 2.00 2.05 2.10 Frequency (GHz) 2.15 2.20 2.25 2.30 Frequency (GHz) Noise Figure Output Return Loss 6 0 5 +25°C -40°C +85°C -5 4 3 -10 2 -15 +25°C -40°C +85°C 1 -20 2.00 2.05 2.10 2.15 2.20 2.25 2.30 0 2.00 2.05 2.10 Frequency (GHz) 20 60 18 50 16 40 14 30 +25°C -40°C +85°C 12 2.25 2.30 0 5 +25°C -40°C +85°C 20 10 15 P 3 2.20 Output IP3 P1dB 10 2.15 Frequency (GHz) OUT (dBm) 20 25 30 10 0 2 4 6 8 P 10 12 14 16 18 20 22 24 OUT (dBm/Tone) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAM-009286 RF Driver Amplifier 250 - 4000 MHz Rev. V1 Typical Performance Curves, 2140 MHz Configuration Current 350 Handling Procedures +25°C -40°C +85°C 300 Please observe the following precautions to avoid damage: 250 200 Static Sensitivity 150 Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these class 2 devices. 100 50 0 0 5 10 15 P OUT 20 25 30 (dBm) Lead-Free SOT-89 Plastic Package† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.