4121

SHD114623
SHD114623A
SHD114623B
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4121, REV. B
POWER SCHOTTKY RECTIFIER
Very Low Voltage Drop
(S-100 for JANTXV equivalent screening and SS for JANS equivalent screening is available)
DESCRIPTION: A 60 VOLT, 120 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-3/3A/3B PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED.
RATING
PEAK INVERSE VOLTAGE
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 OC)
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT
SYMBOL
MAX.
UNITS
PIV
60
Volts
IO
120
Amps
IFSM
1650
Amps
CT
5000
pF
RθJC
0.20
°C/W
Top/Tstg
-65 to
+ 175
°C
SYMBOL
MAX.
UNITS
Vf
0.79
Volts
(t=8.3ms, Sine)
MAXIMUM JUNCTION CAPACITANCE
(Vr =5V)
MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode)
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 120 Amps)
TJ = 25 °C
TJ = 125 °C
0.72
MAXIMUM REVERSE CURRENT (Ir @ 60V PIV)
TJ = 25 °C
TJ = 125 °C
Ir
3
180
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
mA
SHD114623
SHD114623A
SHD114623B
SENSITRON
TECHNICAL DATA
DATA SHEET 4121, REV. B
MECHANICAL DIMENSIONS: In Inches / mm
.560±.020
.550±.020
(14.0±.508)
.410±.010
(10.4±.254)
(14.2±.508)
.410±.010
(10.4±.254)
.410±.010
(10.4±.254)
.410±.010
(10.4±.254)
.410±.010
(10.4±.254)
.200±.010
(5.08 ±.254)
.150±.010
(3.81±.254)
.410±.010
(10.4±.254)
.015±.005
(.381±.127)
.075 (1.91) Max
Copper Anode
.020±.005 R
(.508±.127 )
Moly Lid
.020±.005 R
.090 (2.29) Max
Alumina Ring
.075 (1.91) Max
(.508±.127 )
Moly Lid
Alumina Ring
Alumina Ring
.020±.002
(.508±.051)
Moly Base
(Cathode)
.015±.002
(.381±.051)
Moly Base
.060±.010
(1.52±.254)
Moly Anode
(Cathode)
Moly Base
.060±.010
SHD-3
SHD-3A
PINOUT TABLE
TYPE
SINGLE RECTIFIER
Note: The Vf curves are for unpackaged die only
SHD-3B
PIN 1 (Base)
CATHODE
Typical Forward Characteristics
PIN 2
ANODE
Typical Reverse Characteristics
(mA)
10 3
101
125 °C
10 2
125 °C
100 °C
10 1
75 °C
10 0
50 °C
10
-1
25 °C
10 -2
0
10
25 °C
20
30
40
Reverse Voltage - V R (V)
50
60
Typical Junction Capacitance
100
Junction Capacitance - C T (pF)
Instantaneous Forward Current - I
F
(A)
Instantaneous Reverse Current - I
R
102
10 -1
0.0
0.2
0.4
0.6
Forward Voltage Drop - V F (V)
0.8
(1.52±.254)
4500
4000
3500
3000
2500
2000
1500
0
10
20
30
40
50
Reverse Voltage - V R (V)
60
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •
SHD114623
SHD114623A
SHD114623B
SENSITRON
TECHNICAL DATA
DATA SHEET 4121, REV. B
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of
the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation
of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or
any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use
at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party.
When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-mail Address - [email protected]
Similar pages