4055

SHD114624
SHD114624A
SHD114624B
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4055, REV. A
HERMETIC POWER SCHOTTKY RECTIFIER
175C Maximum Operation Temperature
DESCRIPTION: A 100-VOLT, 120 AMP, HERMETIC POWER SCHOTTKY RECTIFIER IN A SHD-3/3A/3B
PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
SYMBOL
MAX.
UNITS
PIV
100
Volts
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C)
IO
120
Amps
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t=10ms, Sine)
IFSM
1400
Amps
MAXIMUM JUNCTION CAPACITANCE
CT
3000
pF
RJC
0.38
C/W
Top/Tstg
-65 to
+ 175
C
Vf
0.87
Volts
PEAK INVERSE VOLTAGE
O
(Vr =5V)
MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode)
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 120 Amps)
TJ = 25 C
TJ = 125 C
0.72
MAXIMUM REVERSE CURRENT (Ir @ 100 V PIV)
TJ = 25 C
Ir
TJ = 125 C
2002 Sensitron Semiconductor  221 West Industry Court  Deer Park, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]
2
30
mA
SHD114624
SHD114624A
SHD114624B
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4055, REV. A
MECHANICAL DIMENSIONS: In Inches / mm
.560±.020
.410±.010
(10.4±.254)
(14.2±.508)
.410±.010
(10.4±.254)
.410±.010
(10.4±.254)
.150±.010
(3.81±.254)
.410±.010
(10.4±.254)
.015±.005
(.381±.127)
Copper Anode
.020±.005 R
.090 (2.29) Max
(.508±.127 )
.075 (1.91) Max
Moly Lid
Alumina Ring
Alumina Ring
.015±.002
(.381±.051)
Moly Base
(Cathode)
Moly Base
SHD-3
.060±.010 (1.52±.254)
SHD-3B
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of
users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
2002 Sensitron Semiconductor  221 West Industry Court  Deer Park, NY 11729-4681
PHONE (631) 586-7600  FAX (631) 242-9798  www.sensitron.com  [email protected]
Similar pages