631

SHD117144
SHD117144B
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 631, REV. A
HERMETIC POWER SCHOTTKY RECTIFIER
200 C Maximum Operation Temperature
DESCRIPTION: 100 VOLT, 7.5 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC SHD-4/4A/4B PACKAGE.
MAXIMUM RATINGS
ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED.
RATING
PEAK INVERSE VOLTAGE
O
MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C)
MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (PER LEG)
SYMBOL
MAX.
UNITS
PIV
100
Volts
IO
15
Amps
IFSM
140
Amps
CT
250
pF
0.9
C/W
Top/Tstg
-65 to
+ 175
C
Vf
0.84
Volts
(t=8.3ms, Sine)
MAXIMUM JUNCTION CAPACITANCE (Vr =5V) (PER LEG)
MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode)
MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE
R
JC
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 7.5 Amps) (PER LEG)
TJ = 25 C
0.68
TJ = 125 C
MAXIMUM REVERSE CURRENT (Ir @ 100V PIV) (PER LEG)
TJ = 25 C
TJ = 125 C
Ir
0.18
4.0
1999 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
mA
SHD117144
SHD117144B
SENSITRON
DATA SHEET 631, REV. A
Mechanical Dimensions: In Inches / mm
.440±.020
(11.2±.508)
.290±.010
(7.37±.254)
.290±.010
(7.37±.254)
.090±.010
(2.29±.254)
.020±.010
(.508±.254)
2
2
.350±.010
(8.89±.254)
.020±.010
(.508±.254)
3
.185±.010
(4.70±.254)
.350±.010
(8.89±.254)
3
.110 (2.80) Max
Alumina Ring
Copper Terminals
Terminal 1
.130 (3.30) Max
SHD-4
Moly Lid
.020±.005
(.508±.127 )
Alumina Ring
Moly Base
Terminal 1
COMMON CATHODE
.015±.002
(.381±.051)
.060±.010
(1.52±.254)
SHD-4B
1
3
PINOUT TABLE
TYPE
DUAL RECTIFIER, COMMON CATHODE (P)
PIN 1
COMMON CATHODE
Typical Forward Characteristics
PIN 2
ANODE 1
PIN 3
ANODE 2
Typical Reverse Characteristics
101
Instantaneous Reverse Current - I R (mA)
101
200 °C
Instantaneous Forward Current - I F (A)
175 °C
0
10
200°C
100
175 °C
150 °C
10-1
125 °C
10-2
100 °C
75 °C
10-3
50 °C
10-4
125 °C
10-1
25 °C
10-5
0
20
40
60
80
100
Reverse Voltage - RV (V)
120
Typical Junction Capacitance
25 °C
Junction Capacitance - C T (pF)
2
10-2
10-3
0.1
0.2
0.3
0.4
0.5
0.6
0.7
Forward Voltage Drop -FV(V)
0.8
250
200
150
100
50
0
0
20
40
60
80
100
Reverse Voltage - RV (V)
120
1999 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
SHD117144
SHD117144B
SENSITRON
DATA SHEET 631, REV. A
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
1999 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681
PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]
Similar pages