TWN4 Mifare™NFC 125kHz/134.2kHz & 13.56MHz Contactless Reader/Writer TWN4 OEM PCB Bottom View TWN4 OEM PCB Top View Desktop Top View Elatec’s TWN4 Family allows users to read and write to almost any 125kHz/134.2kHz and 13.56MHz tags and/or labels. It supports all major transponders from various suppliers like ATMEL, EM, ST, NXP, TI, HID, LEGIC, INSIDE etc. and ISO standards like ISO14443A/B including layer 4 (T=CL), ISO15693, ISO18092 / ECMA-340 (NFC). The new generation is a direct enhancement to the successful TWN3 family as it comes in the same mechanical dimensions (OEM PCB and Desktop Housing). Desktop supports host communication via USB or RS232. Special Features: Powerful SDK for writing Apps which are executed directly on the reader Infield Upgradeable Direct chip-commands support Power down mode for lowest power consumption Two onboard SAM sockets (Secure Access Module)1) CCID and PC/SC 2.011) Additional interfaces for OEM PCB version o I²C, SPI2), Clock/Data3), Wiegand3), CAN2)3) o Dedicated expansion bus for connection of LCD, mass storage, etc. o 8 GPIOs Worldwide certifications for worldwide sales: WEEE, RoHS, R&TTE, CE (Europe), FCC (USA), IC (Canada), ACA (Australia / New Zealand), VCCI (Japan), SRRC4) (China), KCC (Korea), ANATEL (Brasil), CFT (Mexico) Elatec GmbH Lilienthalstr. 3 82178 Puchheim Germany Phone: Fax: +49 89 5529961 0 +49 89 5529961 29 [email protected] www.elatec-rfid.com Technical Data4) Frequency Housing Dimensions (L x W x H) Power Supply Current Consumption Temperature Range Read- / Write Distance HOST Interface OS Support Transmission Speed Modes of Operation Relative Humidity Supported Transponders Certifications MTBF Weight Order Code OEM Board USB black / white RS232 black / white 1)In 125kHz, 134.2kHz (LF) / 13.56MHz (HF) Material ABS UL94-V0, colour black or white Desktop Reader: 88mm x 56mm x 18mm / 3.5inch x 2.2inch x 0.7inch OEM Board: 76mm x 49mm x 14mm / 3.0inch x 1.9inch x 0.6inch 4.3V..5.5V via USB or RS232; RS232 requires external power supply; 3.3V +/- 5% via connector CNA RF field off: 20mA / Cyclic Operation: 2mA1) / Power down Mode: 10μA2) RF field on: 120mA typically Operating: -25°C up to +80°C (-13°F up to +176°F) Storage: -45°C up to +85°C (-49°F up to +185°F) Up to 100mm / 4inch (depending on transponder) USB, RS232, serial 5V CMOS TTL, I²C, SPI2), Clock/Data3), Wiegand3), CAN2)3) Windows XP, Vista, 7 (32-/64-bit), 8, Linux Host: USB: Full speed (12Mbit) – RS232: up to 115.200baud / Air: up to 848kbit/s USB key board emulation – USB virtual COM port – Transparent (direct chip-commands support) CCID and PC/SC 2.011) 5% to 95% non-condensing Standard: 125kHz / 134.2kHz 4100, 4102, 42005), AWID, Casi Rusco, HITAG 16), HITAG 26), HITAG S6), Keri, MIRO, Pyramid, TIRIS/HDX, UNIQUE Optionally, in consideration: 4305, Cardax, FDX-B, IDTECK, Q5, TITAN, T55x7, ZOODIAC 13.56MHz / ISO14443A Mifare Classic 1k & 4k, Mini, DESFire EV1, Plus S&X7), Pro X7), SmartMX7), Ultralight, Ultralight C, SLE44R35, SLE66Rxx (my-d move)7), Legic Advant5), PayPass7) 13.56MHz / ISO14443B Calypso7), CEPAS7), HID iCLASS5), Moneo7), PicoPass7), SRI512, SRT512, SRI4K, SRIX4K 13.56MHz / ISO18092 / NFC NFCIP-1: Active and passive communication mode, Peer-to-Peer1), NFC Forum Tag Type 1-4 Sony FeliCa6) 13.56MHz / ISO15693 EM4x337), EM4x357), HID iCLASS5), ICODE SLI, Legic Advant5), M24LR16/64, Tag-It, SRF55Vxx (my-d vicinity)7), PicoPass7) Version P: Standard + Cotag, G-Prox8), Honeywell Nexwatch, HID Prox, Indala, ioProx 1) Version PI : Version P + HID iClass (CSN and Facility Code) CE, R&TTE, RoHS-II compliant, FCC, IC, ACA, VCCI, SRRC2), KCC, CFT, ANATEL 500.000 hours Approx. 20 g (without housing) Version PI Standard Version P ART14764 ART14187 ART14763 ART14766 / ART14768 ART14188 / ART14189 ART14765 / ART14767 ART14770 / ART14772 ART14190 / ART14191 ART14769 / ART14771 Preparation 2)On Request Only 3)External Interface Required 4)Target Specification 5)UID Only 6)Encryption Not Supported 7)UID/PUPI Only, Read/Write On Request 8)Hash Value Only Accessories Order Code Order Code AC Wall Adapter ART13512 Snap-in holder for TWN3/TWN4 desktop ART14712 Europe ART11493 2.0m USB Type A cable for TWN3/TWN4 OEM PCB ART14713 USA ART12240 2.0m RS232 DSUB 9 DC cable for TWN3/TWN4 OEM PCB ART14714 ART14715 AUSTRALIA UK Drawing/Pin Out Refer to document DS_TWN4 Reader Family Pinouts Elatec reserves the right to change any information or data in this document without prior notice. The distribution and the update of this document is not controlled. Elatec declines all responsibility for the use of product with any other specifications but the ones mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification © 2013 Elatec GmbH – DocRev5 – 07/2013 Elatec GmbH Lilienthalstr. 3 82178 Puchheim Germany Phone: Fax: +49 89 5529961 0 +49 89 5529961 29 [email protected] www.elatec-rfid.com